Download Arrow NW108 Instructions / Assembly
Transcript
● 8840 Ridge Cap (1) ● 7483 Roof Panel (2) ● 8486 Ridge Cap (1) ● Parts Needed For ● Step 15 Ridge Caps & Panels A28 1 Install the first ridge cap on the completed roof section using bolts and nuts. Fasten roof panel overlaps not used for ridge cap. Cover the head of bolt with the 2" (5,1 cm) piece of weather stripping tape. Do not fasten the ends of the ridge cap at this time. 8840 STEP 1 Strips 2 Install the second ridge cap overlapping the first ridge cap while installing the remaining narrow roof panels. Continue weather stripping the ridge. 3 Fasten the lower end of the panels to the side wall angles using screws and washers. Use bolts and nuts through wall angle overlaps at the bottom of the panel. Cut Weather Stripping and Fold Under 8486 STEP 2 7483 7483 STEP 28 3