Download Arrow VD86 Instructions / Assembly

● Parts Needed For ●
Step 8
● 9344 Siding Stud (6)
Studs
W21 ctr
(6)
The studs provide a surface for attaching the siding panels.
1 Following dimensions, measuring
from the ends of angles, place a stud
between each corner and splice post
at the rear of building and 2 studs
between corner posts at the sides.
Position stud inside top angle and
fasten with a screw at the lower hole.
2 Rest bottom tab (large hole) outside floor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
23 5
/1
59,2 6"
cm
22 1/16"
56,0 cm
FASTEN STUD AT
LOWER HOLE
9344
FR
ON
T
DO NOT FASTEN TAB
AT THIS TIME
LARGE HOLE
21