Download Sunjoy L-GZ712PST-C Instructions / Assembly
Transcript
Alcove Gazebo Parts List screen A 4 Long beam B 2 Short beam C 2 Main top connector D 1 2nd tier top connector E 1 2nd tier top pole F 4 Curve pipe connector G 4 Long arc beam H 4 I 4 Long middle beam J 2 Short middle beam K 2 hook L 1 Main canopy M 1 2nd tier canopy N 1 Mosquito netting O 1 finial P 1 Short arc beam Fig.1: Lock the long beam (B)and short beam (C) to the screen (A). Fig.2: Insert the hook (L) into the main top connector (D). Fig.5:Insert the curve pipe connector (G) into the main top connector (D) Fig.3: Insert the long middle beam (J) into the short beam (C), insert the short middle beam (C) into the long beam (B). Fig.6: Insert the long arc beam (H) and short arc beam (I)into the curve pipe connector (G). Fig.4: Insert the long middle beam (J) and short middle beam (K) into the main top connector (D). Fig.7: Insert the long arc beam (H) and short arc beam (I)into the standing pole of the screen (A). Fig.8 : Put the main canopy (M) onto the main top, do not unfold, then nd insert the 2 tier top nd pole (E) into the 2 tier top connector(E). nd Fig.9 : Put the 2 tier nd canopy (N) on the 2 tier top, secure the four nd corners to the 2 tier top pole. nd Fig.11: Insert the 2 tier top pole (F) into the curve pipe connector (G), open the main canopy(M),and secure the canopy to the screens and beams. HardwarePack 3 FF ¢6*180 ground stake 16pcs GG Plastic loop 52pcs Fig.10: Insert the finial nd (P) into the 2 tier top connector (E). Fig.12: Secure the mosquito net (O) to the screen (A) and beams (B)(C)with plastic hook (GG) Fig.13: Secure the gazebo to the lawn with ground stake (FF).