Download Home Decorators Collection 7475100210 Instructions / Assembly

 HOME
DECORATORS
COLLECTION
INV#/4751
SK18160 ELIXIR LARGE STORAGE CABINET 33"HX29"WX15.25"D
ASSEMBLY INSTRUCTIONS
Made In China
y
NE
Thank you for purchasing this quality product. Be sure to check all
packing material carefully for small parts, which may have came
loose inside the carton during shipment. Count all parts and material
present. If any parts are missing or damaged, please contact our
Customer Service Department for efficient and speedy service.
Please indicate the model number and code letter of part(S) needed.
IMPORTANT NOTE:Follow instructions listed below in proper
sequence as numbered to assure fast,easy and correct assembly.
PARTS LIST
©
O
< (3)
7/
=
7
\
A
Im
A
Back board - 1PC N Front door - 1PC + | Panel - 2PCS *
Top cap - 1PC Bottom shelf - 1PC Shelf - 1PC
и
/
re
Tempered glass- 2PCS
Glass protector- 2PCS
Foot knob - 4PCS
U y.
Metal screw - 18PCS
©
Door knob - 2PCS
1-7/8"Metal screw - 2PCS
Rectangle metal
plate - 2PCS
plastic anchor - 1PC
©
>
o
1-1/2" metal screw -1PC
Plastic band - 1PC
—3/15——
FIG 1
©
|
Ss
М |!
uo
/
e Screw 4 foot knobs(9) onto back board (1) and front door (2)
— 4/15 ——
FIG 2
—
7 \
<
4
= Ny J
OZ
_ \\ =
e Screw panel (3) onto front door (2) with 6 PCS metal screws (10)
— 5/15 ——
FIG 3
e Screw assembled piece onto back board (1) with 6 PCS metal screws (10)
and adjust foot knob level
—6/15——
FIG 4
q
[2
A Г NN
A.
NN
x
S “
Se
Ng
X
. AT
(0——
o
Ve
77
7
e Screw bottom shelf (5) onto bottom of cabinet with 4 PCS metal screw (10)
— 7/15 ——
FIG 5
e Tighten door knob (9) with 1-7/8" metal screw (12) on Left door and
right door.
—— 8/15 ——
©
A.
TELA ||
FIGO
FIG 7
A
\
а,
.
\
\ A
co
©
—
J N = = М /
0
o <
a [|
e
\
\
\
\
\
e
NE
/ |
L
(Z
N =
e Insert 2 PCS glass protector (8) to protect the tempered glass.
——10/15—
—_—_—— —
e Slide top cap (4) onto the top of main cabinet.
—11/15——
FIG 9
ren
ee ~~
e Tighten one of rectangle metal plate (13) and top cap with metal screw (10)
on the back of the cabinet using a Philips screwdriver.
—12/15—
FIG 10
e Tilt and place the shelf (6) on the shelf holder.
Be sure the bigger gap is in the front.
—13/15——
FIG 11
7
INE
=
/
J
e Place the cabinet at desired position by the wall. Mark the insertion point for
the plastic anchor (14) on the wall. Using the proper hardware for your wall
type, drill 1/4" hole.
e Tighten another rectangle metal plate (13) to the plastic anchor (14) by using
the 1-1/2" metal screw (15).
—14/15——
FIG 12
Y
INE
[77
/
e Using the plastic band (16), connect two rectangle metal plates (13).
—15/15——