Transcript
Ornamental Gate Fencing 3 EASY STEPS – for all sizes – Ornamental Gate Fencing 3 EASY STEPS – for all sizes – 1 Lay out fencing pieces along the area where you want to install. Be sure the fencing pieces are touching. You may want to hook them together as you proceed. See illustration below. 1 Lay out fencing pieces along the area where you want to install. Be sure the fencing pieces are touching. You may want to hook them together as you proceed. See illustration below. 2 Push pointed anchor posts into ground. If ground is too hard, soften it with water. If necessary, make starter holes with screwdriver. 2 Push pointed anchor posts into ground. If ground is too hard, soften it with water. If necessary, make starter holes with screwdriver. 3 Continue fencing run. As you go, hook Victorian fencing pieces together with convenient interlocking system. Girard, PA 16417 www.emscogroup.com 3 Continue fencing run. As you go, hook Victorian fencing pieces together with convenient interlocking system. Girard, PA 16417 www.emscogroup.com