Transcript
Sliding Door Installation Guide. Thank you for your purchase. TOOLS REQUIRED Pencil Measuring Tape Phillip’s Screwdriver Drill 3/16 Bit SIDE VIEW 1 1/4”phillip’s head screws provided Trim Install top track even with jamb. Set threshold track 5/8” from front edge of frame. Header 1/4”phillip’s head screws provided Pre-drilled holes in track fasten with screws provided Sliding Door threshold 5/8” STEP 1 Floor Install top reversible track first using screws provided. STEP 2 Install bottom threshold track 5/8” from front edge of frame. Back Side View Adjustment screw STEP 4 STEP 3 Now you are all set to install the doors between the top & bottom tracks. Now if required, you can make adjustments in height on bottom rollers using a screw driver. DONE! WASN’T THAT EASY?