Download Toro GreensPro 1240 Specifications

Transcript
GreensPro® 1240
The Toro GreensPro 1240 riding greens roller is the
perfect rolling tool for fine sporting turf such as
golf greens, bowling greens and tennis courts. Turf
that requires a smooth, high performance surface
for optimum playing will benefit from precision
greens rolling with the GreensPro greens roller.
GREENSPRO 1240, MODEL 44912*
ENGINE
FUEL
TRANSMISION
DRIVE
SMOOTHING ROLLS
TRACTION DRIVE ROLLER
ROLLING WIDTH
GROUND SPEED
CONTROLS
CONTOUR FOLLOW
GROUND PRESSURE
STEERING
SEAT
TRAILER
LIFTING TIRES
LIFTING TIRE PRESSURE
Honda® GX200 5.5 hp (4.1 kW) @3600 RPM, air-cooled, 4-stroke OHV; mechanically governed.
Unleaded gas
Hydrogear BDR-317
Twin chain to rear drive roller
3.5” (89 mm) diameter - 4 split rollers. Overlapping twin steering heads.
6.5” (165 mm) diameter vulcanized rubber coated cylinder, 30” (76 cm) long
47.2” (120 cm)
Roll: 0-8 mph (0-12.8 km/h) in either direction
Tilt steering wheel, directional foot pedals, parking brake
Yes
3.75 PSI (0.26 Bar)
Wheel, adjustable tilt to 40°
High-back, adjustable
Integrated with QuickLatch towing system
16 x 6.50 - 8
10 PSI (0.69 Bar)
OVERALL DIMENSIONS
WIDTH
LENGTH
HEIGHT
WEIGHT
WARRANTY
48” (122 cm)
53.5” (136 cm)
42” (107 cm)
691 lbs. (313 kg)
Two-year limited warranty. Refer to operator’s manual for further details.
*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
104