Transcript
Brackets for Cameras with Built-in or Accessory Grips Pro-T Pro-T and Press-T Our lightest, fastest, professional brackets. The Pro-T and Press-T are flashrotating brackets. Both are light, compact and fast-handling. The flash arm swings to keep the flash centered over the lens for both horizontal and vertical compositions. These brackets do not require the use of a cable release. Unlike conventional brackets, the Pro-T is designed for you to hold the camera rather than the bracket, providing a more natural way of shooting. It allows you to switch between horizontal and vertical compositions instantly. The Press-T is a slightly shorter and even more compact version of the Pro-T. It is popular with photojournalists and other shooters who work out of a camera bag. Features: • Pivoting, machined flash arm keeps the flash centered above the lens for both horizontal and vertical compositions. • Solid, machined aluminum components combine to provide lightweight, superior rigidity and extraordinary balance. • Integral QR (Quick-Release) Plate mates to optional QR Receiver, allowing the bracket and tripod to be attached or detached instantly. • Pro-T incorporates 3° downward flash tilt for both horizontal and vertical compositions. This improves lighting coverage for typical flash shooting distances. • Fully compatible with cameras with accessory battery packs or motor drives. • Accepts all Stroboframe flash mounts, Camera Anti-Twist Plates* and Quick-Release (QR) accessories. SLIM, LIGHT AND FAST Brackets shown with optional flash mount (Shoe Mount 300-SHO) EVEN MORE COMPACT * Note: When using Pro-T or Press-T model brackets with heavier flash units, we consider the use of a Camera Anti-Twist Plate mandatory (the Pro-T/m has this feature built in). Pro-T/m Pro-T and Pro-T/m Specifications For Mamiya We also offer the Pro-T/m, a model made specifically for the Mamiya 6, 6MF and 7 rangefinder cameras. The base is configured to allow full access to all Mamiya baseplate controls. You can load film and change lenses easily without removing the camera from the bracket! This bracket also has a built-in camera anti-twist system. Net Weight: 14 oz. Bracket Height: 9.25" Nominal Lens-to-Flash Distance: 12" Includes: 1/4"-20 camera mounting screw & flash mounting knob, cork base pad, flash arm adjustment wrench Suggested Accessories: Camera Anti-Twist Plates (not required for Pro-T/m), Flash Mounts, Camera and Flash Quick Releases Catalog Number: 310-800 (Pro-T) Catalog Number: 310-807 (Pro-T/m) Press-T Specifications Net Weight: 11 oz. Bracket Height: 7.0" Nominal Lens-to-Flash Distance: 10" Includes: 1/4"-20 camera mounting screw & flash mounting knob, cork base pad, flash arm adjustment wrench Suggested Accessories: Camera Anti-Twist Plates, Flash Mounts, Camera and Flash Quick Releases Catalog Number: 310-810 Stroboframe • Stroboframe