Download Telular 1X User's Manual

Transcript
Connect the SX4P to AC Power
1. Attach the barrel connector of the power supply to the AC power input on the rear panel of
the SX4P.
2. Connect the AC power cord to the power supply.
3. Move the AC/Battery switch to the AC position.
4. Plug the AC power cord into the wall socket. The SX4P will power up automatically.
5. Check the cellular strength and move the unit as needed to get the best signal - see the
Service Indication section of this manual.
AC power input
Wall socket
AC/battery switch
AC power cord
Power supply
Figure 9 - Connecting the SX4P to AC Power.
Phonecell® SX4P 1x
3
User Manual