1
Download Technicolor - Thomson DPL950 User's Manual
Transcript
DPL950-EN DVD new 5/7/03 10:10 AM Page 1 DVD Player Basic Playback Features • Press STOP once to stop playback and go into resume mode. 1. Press SOURCE on the main unit until “DVD/CD” appears on the display or DVD source key on the remote to select DVD/CD input source. EN 0 memo PLAY clear REV FWD ESET + BAND/APP SOURCE RANDOM SURROUND BASS/TREBLE RP theater modes info OPEN/CLOSE delay stereo PAUSE ZOOM REC vcr PHONES STOP dvd tv tuner up digital level MULTI PRODUCT tape sat/cab tuner video / vcr NOTE RDS D I G I TA L DVD PRO.LOGIC VCD CD INTRORANDOM MP3 L C RESUME MODE: The next time PLAY is pressed, the unit will begin playback at the location where it was last stopped. Press STOP key again to cancel the resume mode. R LS LFE RS 2. Open disc tray for loading discs with label side facing up. Press again to close it. VOLUM Quick search PHONES 3. Press PLAY/PAUSE on the unit or PLAY on the remote control to start playback • Press PLAY/PAUSE on the unit or PAUSE to pause playing during playback. Press PLAY/PAUSE on the main unit or PLAY on the remote to resume normal playback. 7 2. Press PLAY at any time to resume normal playback. memo clear 0 PLAY REV FWD PRESET + 0 memo PLAY clear PRESET + 9 8 1. While playing a disc, press REVERSE on the remote control to scan backwards through the disc. Press FORWARD on the remote for scanning forward. Press repeatedly to change searching speed to 1,2 or 3 times for VCD and 1,2,3 or 4 for DVD. REV FWD ZOOM REC vcr PAUSE PHONES STOP PHONES PAUSE ZOOM REC vcr STOP • Press SKIP REVERSE to go back to the previous chapter or SKIP FORWARD to move to the next chapter. py tuner down tv PRESET - 1. Press PAUSE on the remote control to freeze picture during playback. Each time you press it again, the picture advances one frame. menu vcr/sat return pr PRESET + PHONE pr 1 Freeze frame, frame advance 2 2. Press PAUSE repeatedly to move forward in still frame. 3. Press PLAY to resume normal playback. 3 5 clear REV 7 ZOOM REC vcr PAUSE STOP clear REV 9 8 memo Note: Remote control selector must be on DVD/CD position. 6 FWD 0 PLAY FWD MULTI PRODUCT PAUSE 19 DPL950-EN DVD new 5/7/03 10:10 AM Page 2 DVD Player Slow motion playback On-screen banner display 1. Press PLAY/PAUSE on the main unit or PAUSE in the remote control to freeze the picture during playback. You can access the on-screen banner display during playback to select many playback features. Each feature is illustrated with an icon. However, each banner display feature is available only if the disc was created with that particular feature. memo clear 0 PLAY REV - FWD An invalid icon appears on the screen when you select an icon that does not function. Also, the icon is “grayed out” to tell you so. PRESET + ZOOM REC vcr PHONES PAUSE STOP MULTI PRODUCT 2. Advance picture in slow motion. Press FORWARD on the remote control for slow motion in forward direction and REVERSE (DVD only) in reverse direction. Press repeatedly to change speed to 1/16 times, 1/8 times, 1/4 times and 1/2 times. clear 7 8 memo 0 Disc type Playmode / Mark Subtitles Chapter 9 BOOKMARK FWD Time indicator Title icon is being highlighted in this example PAUSE STOP 3. Press PLAY/PAUSE on the main unit or PLAY on the remote control to resume normal playback. clear 7 8 memo 0 9 General use 1. Press INFO on the remote control during playback to show on-screen banner. PLAY REV PRESET + Camera angles PLAY REV ZOOM REC vcr Audio Title FWD theater modes info OPEN/CLOSE stereo PHONES delay dvd tv ZOOM REC vcr PAUSE tuner up digital level STOP tape sat/cab tuner video / vcr hifi dvd /cd RDS pty 2. Use the LEFT or RIGHT arrows on the remote control to move cursor on the banner. Selected feature icon will be highlighted. OPEN/CLOSE theater modes info stereo tv delay dvd tuner up digital level tape sat/cab tuner video / vcr hifi d d / d RDS pt 3. Press OK to open menu under selected feature. stereo tv delay dvd digital tuner up level tape sat/cab tuner video / vcr hifi dvd /cd RDS pty tuner down tv 20 vcr/sat return menu DPL950-EN DVD new 5/7/03 10:10 AM Page 3 DVD Player 2. Press the UP/DOWN key to select the audio channel you want, then press OK to confirm. Selecting a title 1. Refer to previous page “General use” to open the title menu. EN y tv dvd digital tuner up digital level tuner up level tape sat/cab tape sat/cab 2. Enter title number using the number keys on the remote control. Add 0 in front of single-digit title number (e.g. 9 = 09). tuner tuner video / vcr hifi dvd /cd RDS pty 1 4 2 tv menu vcr/sat return menu vcr/sat return 6 9 8 memo RDS pty 3 5 7 tv hifi dvd /cd tuner down tuner down pr video / vcr 0 PLAY clear REV FWD NOTE Some discs have one title only. NOTE This feature only works if the disc was created with multiple audio tracks. Selecting a chapter Selecting subtitle language 1. Refer to previous page “General use” to open the title menu. 2. Enter chapter number using the number keys on the remote control. Add 0 in front of single-digit chapter number (e.g. 9 = 09) 4 clear 2 8 memo 0 tv digital 6 9 tuner up tuner digital tuner NOTE tv level RDS pty video / vcr hifi dvd /cd vcr/sat return RDS pty tuner down tuner down FWD tuner up tape sat/cab video / vcr hifi dvd /cd dvd level tape sat/cab PLAY REV tv dvd 3 5 7 2. Press the UP/DOWN key to select the audio channel you want, then press OK to confirm. y pr 1 1. Refer to previous page “General use” to open the subtitle menu. menu tv vcr/sat return menu NoteL To exit the OSD banner, press the INFO key. The chapter feature will not work if the disc is not formatted with separate chapters. Selecting audio language 1. Refer to previous page “General use” to open the subtitle menu. NOTE This feature only works if the disc was created with subtitles. 21 DPL950-EN DVD new 5/7/03 10:10 AM Page 4 DVD Player Selecting camera angle Using bookmarks 1. Refer to page 20 “General use” to open the camera angle menu. The bookmark feature allows you to mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks. 2. Press the UP/DOWN key to select the audio channel you want, then press OK to confirm. stereo tv delay stereo dvd tv digital tuner up dvd level tape sat/cab tape sat/cab video tuner / vcr tuner hifi dvd /cd RDS pty vcr/sat return level 1. Refer to Page 20 “General use” to open the bookmark menu. video / vcr hifi dvd /cd RDS pty tuner down tv tuner up digital Adding bookmarks delay tuner down menu tv vcr/sat return menu NOTE 2. Use the arrows on the remote to move the cursor (yellow frame) to the “Mark” check line, then press OK to add bookmark when you reach the scene you want to do so. stereo tv This feature only works if the disc was created with multiple angles. delay stereo dvd tv digital tuner up tape sat/cab tuner digital tuner RDS tv 1.Press ZOOM button on the remote to select the zoom ratio. clear pty hifi dvd /cd vcr/sat return RDS pty tuner down menu tv vcr/sat return menu 3. To add another bookmark, move the cursor to the right with arrow button and then press OK when you reach another scene you want to do so. PLAY REV ZOOM REC vcr level video / vcr tuner down Selecting zoom ratio tuner up tape sat/cab video / vcr hifi dvd /cd delay dvd level FWD 4. Move cursor to the door icon and then press OK to exit menu. PAUSE STOP MULTI PRODUCT Recalling bookmarks 1. Refer to page 20 “General use” to open the bookmark menu. 2. There are two zoom ratio available, press the zoom key to access the following zoom sequence. NORMAL > ZOOM 1 > ZOOM 2 > NORMAL 2. Use the arrows on the remote to move cursor (yellow frame) to the “Go To” check line and to the bookmarked scene you want to recall. 3. Press OK to recall bookmarked scene. 4. Move cursor by using the arrows to the door icon and then press OK to exit menu. Clearing bookmarks The bookmarks are cleared each time a disc is removed from the player or when the power is turned off completely. If all 9 bookmarks are in use, you can still mark new scenes but the previous bookmarks will be erased starting from the earliest one. 22 DPL950-EN DVD new 5/7/03 10:10 AM Page 5 DVD Player Play mode 2. The box under “Title” will be highlighted automatically. 1. Refer to previous page “General use” to open the playmode menu. tv dvd tuner up info level digital tuner video / vcr hifi dvd /cd delay stereo dvd tv tape sat/cab 2. Press the up/down buttons to select among : Normal >Program edit/ Program play > Repeat AB > Repeat Title > Repeat Chapter > Normal EN OPEN/CLOSE digital tuner up RDS pty tuner video / vcr tuner down tv 3. Press OK to confirm setting. level tape sat/cab hifi dvd /cd menu vcr/sat return RDS pty tuner down Use the arrows on the remote to select title and chapter. theater modes info OPEN/CLOSE stereo tv stereo tv digital dvd digital tuner up level tape sat/cab hifi d d / d RDS level 3. “Add” will be highlighted automatically after chapter is selected. Press OK to add selected track and chapter(s) onto playlist. video / vcr hifi dvd /cd pt tuner up tape sat/cab tuner video tuner / vcr delay dvd delay stereo pty delay dvd tv digital RDS tuner up level tape sat/cab tuner down tuner NOTE video / vcr hifi dvd /cd RDS pty tuner down Random playback is not available in DVD mode. 4. Move to highlight “Play” (start program playback) or “Done” (return normal playback with program saved), then press OK to start program playback or return to stop mode. stereo Program playback tv delay stereo dvd tv digital tuner up level tape sat/cab Edit program 1. Refer to previous page “General use” to open the playmode menu, or press and hold PROGRAM button on the main unit to enter program mode. tuner digital tuner up level tape sat/cab video / vcr hifi dvd /cd delay dvd tuner RDS pty tuner down video / vcr hifi dvd /cd RDS pty tuner down / Note: Program mode can only be activated during STOP / Resume mode. NOTE You can select at maximum 32 items by repeating steps 2 - 3. 23 DPL950-EN DVD new 5/7/03 10:11 AM Page 6 DVD Player Delete program 4. Use the LEFT and DOWN arrows to highlight “Insert” and then press OK. 1. Select the program menu from the OSD banner, or press and hold the RPT/PROG. button on the main unit to display program edit playlist. OPEN/CLOSE tv tv delay digital tuner up level tuner dvd OPEN/CLOSE tuner up digital info level digital tuner video / vcr hifi dvd /cd delay stereo tuner up pty hifi dvd /cd menu vcr/sat return t / t t 5. Use the arrow buttons to highlight “Play” (start program playback) or “Done” (return to normal playback with program saved) and then press OK. video tuner / vcr tuner down tv tuner down level tape sat/cab RDS RDS pty RDS pty tuner down dvd tv tape sat/cab hifi dvd /cd level video / vcr video / vcr hifi dvd /cd tv tuner up tape sat/cab tape sat/cab tuner delay dvd dvd digital 2. Use the arrows on the remote to select and highlight the programmed item you want to delete on the playlist. stereo info stereo RDS pty tuner down 3. Highlight “Delete” and then press OK to delete item. OPEN/CLOSE tv Program will be cancelled when; 1. disc tray is opened; 2. power is turned off; 3. STOP is pressed twice. The red PGM indicator will disappear on display and player will resume normal playback mode. info stereo delay dvd digital tuner up level tape sat/cab tuner video / vcr hifi dvd /cd Cancel program RDS pty TV OUT signal selection tuner down 4. Repeat steps 2 and 3 to delete additional items. 5. Use the arrows to select and highlight “Play” (start program playback) or “Done” (return to normal playback with program saved) and then press OK. Insert chapter 1. Select the program menu from the OSD banner, or press and hold the RPT/PROG. button on the main unit to display program edit playlist. If you connect your receiver to a monitor set equipped with a component input (using Y, Pr, Pb sockets), you must set the unit to COMPONENT VIDEO OUT, you can choose to use either the COMPONENT OUT or SCART output by the following procedures: 1. Press and hold the BASS/TRE/TV OUT button for 3 seconds. SOURCE BASS/TREBLE RPT/PROG. RROUND TV OUT 2. “TV SYSTEM” will show on display. 3. Press again to select “TV RGB” and “TV COMPNT” (which means Y, Pr, Pb). 4. Release button and wait for a few seconds to validate your selection. 2. Use the UP or DOWN arrows to select and highlight item on the playlist where you want to insert a chapter before it. 3. Use the LEFT and RIGHT arrows to select Title or Chapter, then the UP and DOWN arrows to select the number. tv dvd OPEN/CLOSE digital tuner up level tv tape sat/cab info stereo digital tuner video / vcr hifi dvd /cd delay dvd tuner up RDS pty tuner video / vcr tuner down tv vcr/sat return menu hifi dvd /cd RDS pty tuner down 24 level tape sat/cab Note: The blue led will light when RGB output is selected, in YPrPb mode, the blue led will only light temporarily. Setting on TV RGB enables a Composite (CVBS) and RGB signal to be delivered to the SCART socket. However, this will also disable any signal from S-VIDEO and YPrPB sockets.) If you set to TV COMPNT, video signal will be delivered in both COMPONENT and S-VIDEO sockets. However, this will also disable the signal from SCART socket.) DPL950-EN DVD new 5/7/03 10:11 AM Page 7 DVD Player Set up menu Audio language General use This step will define the default audio language. Choosing an audio language from the on-screen banner display will only overwrite this setting temporarily. 1. Press MENU in STOP mode to display the set up menu on screen. The menu shows current settings. NOTE NOTE If language selected is not available on disc, the language designated as default by each disc will be selected.. if you press during disc playback, only the disc’s own menu will be displayed. 1. Open audio language menu. tuner video / vcr RDS pty hifi dvd /cd tuner down tv vcr/sat return menu pr 2. Use UP and DOWN arrows to select language and then press OK. For languages other than options available: 2. Use arrow buttons to highlight options and press OK to open selected menu. tv dvd stereo tuner up digital level tv delay 3. Press DOWN to select “Other” and then press OK. 4. Enter language code into boxes and then select OK to return to main menu. Press OK on the remote. dvd digital tape sat/cab tuner up level tape sat/cab tuner video / vcr hifi dvd /cd RDS pty video / vcr hifi dvd /cd tuner down tv tuner tuner down menu vcr/sat return RDS pty t / t t 3. Press LEFT arrow to go back to the previous menu or press RETURN to exit the setup menu completely. tv dvd digital tuner up level tuner video / vcr tape sat/cab hifi dvd /cd tuner hifi dvd /cd tuner down RDS pty vcr/sat return tv vcr/sat return menu pr tuner down tv RDS pty video / vcr menu 25 EN DPL950-EN DVD new 5/7/03 10:11 AM Page 8 DVD Player Subtitle language Menu language This step will define the default subtitle language. Choosing a subtitle language from the on-screen banner display will only overwrite this setting temporarily. This step will define the language of menus and other short messages shown on screen. 1. Open menu language menu. NOTE If language selected is not available on disc, the language designated by each disc as default will be selected. 1. Open subtitle language menu. 2. Use the UP and DOWN arrows to scroll the selections and select the language and then press OK to return to main menu. 2. Press UP and DOWN arrow to select language and then press OK. dvd tv theater modes info OPEN/CLOSE digital tuner up level stereo tv tape sat/cab tuner up digital tuner video / vcr delay dvd RDS pty hifi dvd /cd tuner video / vcr tuner down menu vcr/sat return tv level tape sat/cab hifi dvd /cd RDS pty For languages other than options available: 3. Move down and select “Other” and then press OK. 4. Enter language code into boxes and then select OK to return to main menu. Press OK button on the remote. stereo pr 1 4 clear 26 2 5 7 8 memo 0 PLAY tv digital 6 9 delay dvd 3 tuner up level tape sat/cab tuner video / vcr hifi dvd /cd RDS pty tuner down DPL950-EN DVD new 5/7/03 10:11 AM Page 9 DVD Player Rating (Parental control) Password This step will disable the playing of some DVDs (especially U.S. type) which are not suitable for some audience, e.g. children. Such kind of DVDs is encoded with a specific rating level. If the rating level of the disc is higher than the preset level (to be set in this step), the playing will be prohibited unless the password (see next step) is entered. Set password EN To disable the viewing of rated DVDs, a four-digit password must be selected. 1. Open the “Set Password” menu. 1. Open the rating menu. 8 7 5 6R 4 PG-13 3 PG Set Password 2 1G Change Password 2. Use the UP or DOWN arrows to highlight the rating that would require a password to play. Press OK to return to main menu. Ratings highlighted in blue require password. tv dvd OPEN/CLOSE digital tuner up level video / vcr hifi dvd /cd tuner up level tape sat/cab RDS pty tuner video / vcr tuner down tv delay dvd digital tuner 3. Use the number buttons to enter password and then press OK. theater modes info stereo tv tape sat/cab 2. Select “Set Password” and press OK. vcr/sat return menu hifi dvd /cd pty RDS The rating systems is based on information encoded on the DVD disc being played, so movies may carry a rating symbol, the disc may or may not contain that rating in its software. In addition to the five standard (MPAA) rating symbols of “G” (level 2), “PG” (Parental Guidance, level 4), “PG13” (Parental Guidance and 13 years old, level 4), “R” (Restricted, level 6) and ”NC17” (from 17 years old, level 7), the DVD will accommodate a total of 8 rating steps, as set by the DVD makers. These additional steps allows for more critical control of program playback for all audiences. 4. Repeat step 3 to confirm password. Level 8: All DVDs can be played (Factory preset). Level 7 to 2: DVDs for general audiences/ children can be played. Level 1: DVDs for children can be played, DVDs for adults/ general audiences are prohibited. Note: \ will be displayed on the VFD once password is set. 27 DPL950-EN DVD new 5/7/03 10:11 AM Page 10 DVD Player 4. Use the number buttons to enter new password and then press OK. NOTE • When incorrect password is entered, new password menu appears and you can enter and confirm password again. • A lock icon shows on unit display when password is required to view rated discs. Important: keep the password in a safe place or remember it reliably as access to rated discs or rating/ password menus requires the correct password. Change password 1. Open the password menu. Set Password Change Password 2. Use the number buttons to enter password and then press OK. info pr delay stereo 2 3 tv dvd digital 4 5 7 8 memo 0 6 tuner clear level video / vcr hifi dvd /cd PLAY REV tuner up tape sat/cab 9 RDS pty FWD tuner down 3. Use the UP and DOWN arrows to select “Change Password” and then press OK. tv dvd OPEN/CLOSE digital tuner up level theater modes info stereo tv tape sat/cab tuner video / vcr hifi dvd /cd 28 tuner up level tape sat/cab RDS pty tuner video / vcr tuner down tv delay dvd digital vcr/sat return menu hifi dvd /cd pty Clear password 1. Refer to page 25 “General use” to open the password menu. 2. Use the number buttons to enter password and then press OK. 3. Move up or down the menu using the UP or DOWN arrows and select “Clear Password”. Press OK to clear password. Use the LEFT arrow to return to the main menu. Current password must be entered first to change password. 1 5. Repeat the above step to confirm password and return to password menu. Use the LEFT arrow to return to the main menu. RDS DPL950-EN DVD new 5/7/03 10:11 AM Page 11 DVD Player TV aspect Dynamic range This step selects the TV aspect, wide-screen (16:9) or conventional (4:3). 1. To disable/enable the dynamic function, enter the dynamic range menu. EN 1. Open the TV aspect menu. Soft Softer 2. Use the UP or DOWN arrows to select TV aspect and then press OK to return to main menu. If you have a wide-screen (16:9) TV, choose “16:9 Widescreen”. 2. Use the UP or DOWN arrows to select Dynamic Range and then press OK to return to main menu. tv dvd theater modes info OPEN/CLOSE digital tuner up level digital - For 16:9 movie you will get (Do not select 16:9 widescreen setting if you are using a 4:3 TV set. or the image may look distorted with some DVD disc.) tuner video / vcr hifi dvd /cd delay stereo dvd tv tape sat/cab tuner up RDS pty tuner video / vcr tuner down tv level tape sat/cab menu vcr/sat return RDS pty hifi dvd /cd - For 4:3 movie you will get Digital audio out If you have a conventional (4:3) TV, - if you select 4:3 letterbox for 16:9 movie, you will get 1. To select digital audio out, enter the digital audio out menu. - if you select 4:3 Pan Scan for 16:9 movie, you will get (the left and right edges are hidden) Off Compressed PCM - for 4:3 movie, for both selections, you will get 2. Use the UP or DOWN arrows to select digital audio out and then press OK to return to main menu. tv dvd OPEN/CLOSE digital tuner up level tv tape sat/cab theater modes info stereo digital tuner video / vcr hifi dvd /cd tuner up level tape sat/cab RDS pty tuner video / vcr tuner down tv delay dvd vcr/sat return menu hifi dvd /cd pty RDS 29
