Download Sub-Zero Refrigerator BI-30U User's Manual
Transcript
Built-In Refrigeration Design Guide Contents 3 Built-In Refrigeration 4 Design Options 6Specifications 17 Custom Panels 32 Full-Scale Templates Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified. BUILT-IN REFRIGERATION Built-In Refrigeration •Energy efficient; many models are ENERGY STAR® qualified. For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the builtin line nothing short of revolutionary. •Advanced water filtration and air purification systems. •NEW! French door models requires less space for door clearance to accommodate virtually any-size kitchen. •NEW! Internal dispenser models provide ice and chilled water inside the refrigerator. KEY FEATURES •Four distinct design approaches: framed, overlay, flush inset and stainless steel. •Crisper and deli drawers form a lower-temperature zone for produce and meats. •Handle options coordinate with handles of Wolf cooking products. •Flip-up grille provides easy access for quick routine maintenance. •Dual refrigeration; two compressors preserve food’s goodness in two sealed compartments. •All models are Star-K certified. BUILT-IN MODELS BI-36R BI-36UFD BI-36RG BI-42UFD BI-36F BI-36S BI-30U BI-42S(ID) BI-30UG BI-42SD BI-36U BI-48S(ID) BI-36UG BI-48SD subzero.com/specs | 3 BUILT-IN REFRIGERATION Built-In Design Options FRAMED OVERLAY For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed application is an overlay model with framed design features. Panel, grille and handle options are available. Custom overlay door panels can be combined with unique handle hardware for design flexibility. Shown with pro handle option to complement Wolf ranges. Customize with panel, grille and handle options. Panels | Custom panels, stainless steel or white enamel. Grille | Classic louvered grille insert or solid custom panel for 84" (standard), 83" or 88" overall unit height. Dual wide grille for dual installations. Panels | Custom panels or stainless steel. Grille | Solid custom panel or pro louvered grille for 84" (standard), 83" or 88" overall unit height. Dual wide grille for dual installations. Handles | Custom, tubular or pro handles. Handles | Full-length standard or extended. Framed. 4 | Sub-Zero Customer Care 800.222.7820 Overlay. BUILT-IN REFRIGERATION Built-In Design Options FLUSH INSET STAINLESS STEEL The flush inset design option allows for flush door and grille panels and custom handle hardware. Shown with tubular handle option to match Wolf built-in ovens. The flush inset application is an overlay model with flush inset panels. Customize with panel, grille and handle options. For a professional look, classic stainless steel models require no customization. To complement the look of Wolf ranges, choose the pro handle option (shown). Grille and handle options are available. Panels | Custom panels or stainless steel. Grille | Solid custom panel or pro louvered grille for 84" (standard), 83" or 88" overall unit height. Dual wide grille for dual installations. Grille | Pro louvered grille for 84" (standard), 83" or 88" overall unit height. Dual wide grille for dual installations. Handles | Tubular or pro handles. Handles | Custom, tubular or pro handles. Flush inset. Stainless steel. subzero.com/specs | 5 BUILT-IN REFRIGERATION Overall Dimensions ALL REFRIGERATOR / ALL FREEZER 26 3/16" (665) 36" (914) 84" (2134) 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 14 1/8" (359) 37 1/4" (946) 2 3/8" (60) Models BI-36R, BI-36RG and BI-36F. 6 | Sub-Zero Customer Care 800.222.7820 23 7/8" (606) Overall dimensions are based on stainless steel models. For flush inset applications, add 1/2" (13) to door clearance dimensions. BUILT-IN REFRIGERATION Overall Dimensions OVER-AND-UNDER 26 3/16" (665) 30" (762) 26 3/16" (665) 36" (914) 84" 84" (2134) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" (584) (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) (606) (606) 14 1/8" 12 1/8" (308) (600) 23 7/8" (606) 23 7/8" 23 7/8" 23 5/8" 4" (102) (359) 311/4" (796) 23 5/8" (600) 37 1/4" (946) 2 3/8" (60) 2 3/8" (60) Models BI-30U and BI-30UG. Models BI-36U and BI-36UG. subzero.com/specs | 7 BUILT-IN REFRIGERATION Overall Dimensions OVER-AND-UNDER 26 3/16" (665) 36" (914) 26 3/16" (665) 42" (1067) 84" 84" (2134) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) (584) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" 4" (102) 23 7/8" (606) (606) 8" 9" (203) (229) 23 5/8" 191/2" 23 5/8" (495) (600) (600) 221/4" (565) 2 3/8" (60) Model BI-36UFD. 8 | Sub-Zero Customer Care 800.222.7820 2 3/8" (60) Model BI-42UFD. 23 7/8" (606) BUILT-IN REFRIGERATION Overall Dimensions SIDE-BY-SIDE 26 3/16" (665) 36" (914) 84" 84" (2134) (2134) 73 3/4" 73 3/4" (1873) (1873) HEIGHT DIMENSIONS ± 1/2" (13) 26 3/16" (665) 42" (1067) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" 23 7/8" (606) (606) 7 1/4" (184) 7 1/2" (191) 8 3/4" (222) 23 7/8" (606) 10 3/8" (264) 26 1/4" 221/4" (668) (565) 2 3/8" (60) 2 3/8" (60) Model BI-36S. Model BI-42S, BI-42SID and BI-42SD. subzero.com/specs | 9 BUILT-IN REFRIGERATION Overall Dimensions SIDE-BY-SIDE 26 3/16" (665) 48" (1219) 84" (2134) 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 8 3/8" (213) 11 5/8" (295) 30" (762) 2 3/8" (60) Model BI-48S, BI-48SID and BI-48SD. 10 | Sub-Zero Customer Care 800.222.7820 23 7/8" (606) BUILT-IN REFRIGERATION Specifications BUILT-IN MODELS INTERIOR CAPACITY ALL REFRIGERATOR / ALL FREEZER BI-36R BI-36RG BI-36F OVER-AND-UNDER BI-30U BI-30UG BI-36U BI-36UG BI-36UFD BI-42UFD SIDE-BY-SIDE BI-36S BI-42S BI-42SID BI-42SD BI-48S BI-48SID BI-48SD SHIPPING WEIGHT R CU FT (L) F CU FT (L) 23.5 (665) 23.4 (663) 22.7 (643) R CU FT (L) F CU FT (L) 13.2 (374) 13.1 (371) 16.4 (464) 16.3 (462) 15.7 (445) 18.3 (518) 4.2 (119) 4.2 (119) 5.3 (150) 5.3 (150) 5.3 (150) 6.4 (181) R CU FT (L) F CU FT (L) 12.4 (351) 16.3 (462) 15.8 (447) 16.0 (453) 19.1 (541) 18.6 (527) 18.8 (532) 8.2 (232) 8.0 (227) 7.9 (224) 7.9 (224) 9.8 (278) 9.6 (272) 9.6 (272) ALL REFRIGERATOR / ALL FREEZER BI-36R BI-36RG BI-36F OVER-AND-UNDER BI-30U BI-30UG BI-36U BI-36UG BI-36UFD BI-42UFD SIDE-BY-SIDE BI-36S BI-42S BI-42SID BI-42SD BI-48S BI-48SID BI-48SD LB (KG) 420 (191) 430 (195) 406 (184) LB (KG) 462 (210) 476 (216) 515 (234) 529 (240) 529 (240) 582 (264) LB (KG) 538 (244) 582 (264) 608 (276) 608 (276) 630 (286) 656 (298) 656 (298) Shipping weights are based on stainless steel models. subzero.com/specs | 11 BUILT-IN REFRIGERATION Opening Dimensions STANDARD INSTALLATION 24" (610) OPENING DEPTH TOP VIEW 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W OPENING WIDTH FRONT VIEW NOTE: Shaded line represents profile of unit. OPENING WIDTH MODEL BI-36R, BI-36RG, BI-36F BI-30U, BI-30UG BI-36U, BI-36UG, BI-36UFD, BI-36S BI-42UFD, BI-42S, BI-42SID, BI-42SD BI-48S, BI-48SID, BI-48SD 12 | Sub-Zero Customer Care 800.222.7820 W 35 1/2" (902) 29 1/2" (749) 35 1/2" (902) 41 1/2" (1054) 47 1/2" (1206) If an 83" (2108) grille height is specified, the opening height must be decreased by 7/8" (22). If an 88" (2235) grille height is specified, the opening height must be increased by 4" (102). If two units are installed side by side, refer to page 14 for dual standard installations. BUILT-IN REFRIGERATION Opening Dimensions FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) 84" (2134) FLUSH INSET HEIGHT W FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 3/4" (19) panel. Dimensions assume a 3/4" (19) panel thickness. FLUSH INSET WIDTH MODEL BI-36R, BI-36RG, BI-36F BI-30U, BI-30UG BI-36U, BI-36UG, BI-36UFD, BI-36S BI-42UFD, BI-42S, BI-42SID, BI-42SD BI-48S, BI-48SID, BI-48SD W 38" (965) 32" (813) 38" (965) 44" (1118) 50" (1270) If an 83" (2108) grille height is specified, the flush inset height must be decreased by 7/8" (22). If an 88" (2235) grille height is specified, the flush inset height must be increased by 4" (102). If two units are installed side by side, refer to page 15 for dual flush inset installations. subzero.com/specs | 13 BUILT-IN REFRIGERATION Opening Dimensions DUAL STANDARD INSTALLATION 24" (610) OPENING DEPTH TOP VIEW W 83 3/4" (2127) OPENING HEIGHT SIDE VIEW OPENING WIDTH FRONT VIEW NOTE: Shaded line represents profile of unit. A dual installation kit will be required for this installation. OPENING WIDTH MODELS Two 30" Models 30" Model and 36" Model Two 36" Models 14 | Sub-Zero Customer Care 800.222.7820 W 59 3/4" (1518) 65 3/4" (1670) 71 3/4" (1822) BUILT-IN REFRIGERATION Opening Dimensions DUAL FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) W 84" (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 3/4" (19) panel. FLUSH INSET WIDTH MODELS Two 30" Models 30" Model and 36" Model Two 36" Models W Dimensions assume a 3/4" (19) panel thickness. A dual installation kit will be required for this installation. 62 1/4" (1581) 68 1/4" (1734) 74 1/4" (1886) subzero.com/specs | 15 BUILT-IN REFRIGERATION Electrical Plumbing The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves. The water supply line must not interfere with installation of the anti-tip brackets. Installation must comply with all applicable electrical codes. ELECTRICAL REQUIREMENTS Electrical Supply 115 VAC, 60 Hz Service 15 amp Receptacle 3-prong grounding-type A reverse osmosis system can be used provided there is constant water pressure of 35–120 psi (2.4–8.3 bar) supplied to the unit at all times. A copper line is not recommended for this application. Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS 1/4" OD copper, braided stainless steel or PEX tubing Water Supply Pressure 7" E (178) 35–120 psi (2.4–8.3 bar) Excess Line for Connection 6" (152) 75 1/2" (1918) FROM FLOOR RIGHT SIDE OF OPENING RIGHT SIDE OF OPENING Electrical supply location. 18" (457) 6" (152) 3" (76) AREA EXTENDS 1/2" (13) FORWARD ON FLOOR Water supply location. 16 | Sub-Zero Customer Care 800.222.7820 36" (914) BUILT-IN REFRIGERATION Custom Panels For framed, overlay and flush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay and flush inset applications. Refer to panel requirements below and the charts on pages 20–25 for custom panel dimensions for your specific design application. IMPORTANT NOTE: Do not cover a glass door with a solid panel. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models. PANEL REQUIREMENTS PANEL WEIGHT BI-36R, BI-36RG, BI-36F All Other Models Grille Panel PANEL THICKNESS Framed Overlay and Flush Inset MAX 75 lb (34 kg) 50 lb (23 kg) 13 lb (6 kg) MIN 1/4" 5/8" (6) (16) FRAMED PANELS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1/4" (6), a filler material must be added to achieve a proper fit. If the panel is thicker than 1/4" (6), rout an edge around the panel or mount the custom panel on a sheet of 1/4" (6) thick material and insert into the channel. Refer to the illustrations below. Routing, recessing or optional extended handles may be required for finger clearance. Refer to the full-scale template on page 32. When installing two units side by side, refer to page 14 for dual standard installations. 1/4" (6) TRIM REVEAL 1/4" (6) PANEL DOOR Panel 1/4" thick or less. 1/4" (6) min ROUT TO 1/4" (6) DOOR Panel thicker than 1/4". subzero.com/specs | 17 BUILT-IN REFRIGERATION Custom Panels PARTIAL FRAMED OPTION PANEL MOUNTING KIT The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. The kit consists of mounting cleats, screws and gages used to properly position the cleats. The kit is available for all built-in models except glass door models. Dual installations require two mounting kits. PARTIAL FRAMED PANEL MODEL BI-42SD BI-48SD WIDTH 15 1/16" (383) 18 3/4" (476) OVERLAY PANELS Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations below. When installing two units side by side, refer to page 14 for dual standard installations. CUSTOM PANEL SPACER PANEL SPACER PANEL CUSTOM PANEL BACKER PANEL BACKER PANEL TRIM 5/16" (8) min 1/8" (3) (OVERLAY) Panel assembly cross section (overlay). 18 | Sub-Zero Customer Care 800.222.7820 3/4" (19) typical .10" (3) 1/4" (6) Panel assembly rear view. BUILT-IN REFRIGERATION Custom Panels FLUSH INSET PANELS ICE AND WATER DISPENSER The flush inset application is an overlay model with flush inset panels. It is not a separate model. For models BI-42SD and BI‑48SD, the refrigerator door panel must include a cut-out to accommodate the external dispenser. The thickness of the panel in this area can range from 1/4" (6) to a maximum of 1 1/8" (29). Refer to the illustrations below. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations for overlay panels. For flush inset panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide. 5/8" 3/32" (16) (2) When installing two units side by side, refer to page 15 for dual flush inset installations. 6 5/16" (160) 1/8" (3) RADIUS 2" (51) HANDLE GLASSWELL 1" 12 7/8" (25) (327) Dispenser dimensions. Handle placement. subzero.com/specs | 19 BUILT-IN REFRIGERATION Framed Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H A A H AH AH H A AH A H H H H AH A A A A A A H H B B W W W W W H H H Door Panel GRILLE (OPTIONAL) Grille Panel H H BI-36RG H H H H H 35 3/4" (908) 69 9/16" (1767) Door Panel W H H H H HH 8 15/16" (227) FREEZER 35 3/4" (908) B B B A A 10 5/16" (262) W W W W W W FREEZER Drawer Panel GRILLE (OPTIONAL) Grille Panel H H H W W W WWWW W W W A A A H H H H H H H H H H BI-30UG / BI-36UG W W W W W BI-36UFD / BI-42UFD REFRIGERATOR Drawer Panel GRILLE (OPTIONAL) Grille Panel W H 35 3/4" (908) 49 15/16" (1268) W H 35 3/4" (908) 18 11/16" (475) W H 35 3/4" (908) 8 15/16" (227) BI-36UG B B B A 5 3/16" (132) Stiles / Rails MODEL BI-30U, BI-30UG W W W W Door Panel H H MODEL BI-36U, BI-36UG H A REFRIGERATOR A AH A H AH AH H H H H W 5 3/16A" (132) A A Stiles / Rails H H H W W W W W BI-30U / BI-36U MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER H H H W W W W W BI-36RG H H H H A A A B B B W W W W W BI-36R / BI-36F H H H H H A A A W H 3/4W W 15 W W W W W 49 W W/16" 29W " (756) (1268) W H 29 3/4" (756) 18 11/16" (475) W H 29 3/4" (756) 8 15/16" (227) BI-30UG Stiles / Rails A 5 3/16" (132) MODEL BI-36UFD REFRIGERATOR (2 PANELS) Door Panels FREEZER Drawer Panel GRILLE (OPTIONAL) Grille Panel W H 17 5/8" (448) 49 15/16" (1268) W H 35 3/4" (908) 18 11/16" (475) W H 35 3/4" (908) 8 15/16" (227) MODEL BI-42UFD REFRIGERATOR (2 PANELS) Door Panels FREEZER Drawer Panel GRILLE (OPTIONAL) Grille Panel 20 | Sub-Zero Customer Care 800.222.7820 W H 20 5/8" (524) 49 15/16" (1268) W H 41 3/4" (1060) 18 11/16" (475) W H 41 3/4" (1060) 8 15/16" (227) BUILT-IN REFRIGERATION WW AA HH WW HH HH BB WW WW WW WW WW Framed Panel Dimensions HH HH HH HH AA BB WW WW BI-36S / BI-42S / BI-42SID BI-48S / BI-48SID WW WW BI-42SD / BI-48SD MODEL BI-36S MODEL BI-48S, BI-48SID, BI-48SD REFRIGERATOR Door Panel W H 19 13/16" (503) 69 9/16" (1767) FREEZER Door Panel W H 15 7/16" (392) 69 9/16" (1767) GRILLE (OPTIONAL) Grille Panel W H 35 3/4" (908) 8 15/16" (227) REFRIGERATOR Door Panel FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel BI-48SD Dispenser Cut-Out* MODEL BI-42S, BI-42SID, BI-42SD REFRIGERATOR Door Panel FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel BI-42SD Dispenser Cut-Out* Cut-Out Location W H 24 13/16" (630) 69 9/16" (1767) W H 16 7/16" (418) 69 9/16" (1767) W H 41 3/4" (1060) 8 15/16" (227) W H 5 7/8" (149) 12 7/16" (316) A B 1 7/8" (48) 28 3/4" (730) Cut-Out Location W H 28 1/2" (724) 69 9/16" (1767) W H 18 3/4" (476) 69 9/16" (1767) W H 47 3/4" (1213) 8 15/16" (227) W H 5 7/8" (149) 12 7/16" (316) A B 1 7/8" (48) 28 3/4" (730) *For models BI-42SD and BI-48SD, panel thickness in the dispenser area can range from 1/4" (6) to a maximum of 1 1/8" (29). If the panel is thicker, you must rout out a minimum 1/4" (6) flat landing area to accommodate the dispenser. subzero.com/specs | 21 BUILT-IN REFRIGERATION Overlay Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H A A H AH AH H A AH A H H H H AH A A A A A A H H B B W W W W W Overlay Panel Spacer Panel Backer Panel H H H H H GRILLE Overlay Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W W W W W H H H H H Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel H 36" (914) 35 1/8" (892) 35 3/4" (908) 69 3/4" (1772) 68 15/16" (1751) H 9H H H H 69 /16" (1767) W 36" (914) A A A 35 1/8" (892) 3 B B 35 /4" (908) H 9 1/4" (235)* A A 8 5/16" (211) 15/16" (227) B B 8B A B 5 1/4" (133) 10 3/8" (264) W W W W W W W W W W W H 50 1/8" 30" (762) 29 1/8" (740) 29 3/4" (756) 49 5/16" (1253) 49 15/16" (1268) W H 30" (762) 29 1/8" (740) 29 3/4" (756) 19" (483) 18 1/16" (459) 18 11/16" (475) (1273) W H 30" (762) 29 1/8" (740) 29 3/4" (756) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) Stiles / Rails | H H H H H W W W WWWW W W W A A A H H H H H H H H H H BI-30UG / BI-36UG W W W W W BI-36UFD / BI-42UFD MODEL BI-36U, BI-36UG W BI-30UG 22 A AH A H AH AH H H H H MODEL BI-30U, BI-30UG REFRIGERATOR H H H W W W W W BI-30U / BI-36U MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER H H H W W W W W BI-36RG H H H H A A A B B B W W W W W BI-36R / BI-36F H H H H H A A A Sub-Zero Customer Care 800.222.7820 A 5 1/4" (133) REFRIGERATOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel W H 36" (914) 35 1/8" (892) 35 3/4" (908) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 36" (914) 35 1/8" (892) 35 3/4" (908) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 36" (914) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) BI-36UG A 5 1/4" (133) Stiles / Rails MODEL BI-36UFD REFRIGERATOR (2 PANELS) Overlay Panels Spacer Panels Backer Panels FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel W H 17 7/8" (454) 17" (432) 17 5/8" (448) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 36" (914) 35 1/8" (892) 35 3/4" (908) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 36" (914) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) BUILT-IN REFRIGERATION WW AA HH WW HH HH BB WW WW WW WW WW Overlay Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR Overlay Panel Spacer Panel Backer Panel HH HH Overlay Panel Spacer Panel Backer Panel BB WW BI-36S / BI-42S / BI-42SID BI-48S / BI-48SID WW H 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) FREEZER AA WW W 25 1/16" (637) 24 3/16" (614) 24 13/16" (630) W H 16 11/16" (424) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE Overlay Panel Spacer Panel Backer Panel WW W H 42" (1067) 41 1/8" (1045) 41 3/4" (1060) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) BI-42SD BI-42SD / BI-48SD Dispenser Cut-Out Cut-Out Location MODEL BI-42UFD REFRIGERATOR (2 PANELS) Overlay Panels Spacer Panels Backer Panels FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel H 20 7/8" (530) 20" (508) 20 5/8" (524) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 42" (1067) 41 1/8" (1045) 41 3/4" (1060) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 42" (1067) 41 1/8" (1045) 41 3/4" (1060) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) REFRIGERATOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel BI-48SD Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel H 12 7/16" (316) A B 2" (51) 28 13/16" (732) MODEL BI-48S, BI-48SID, BI-48SD W Dispenser Cut-Out MODEL BI-36S REFRIGERATOR W 5 7/8" (149) W H 20 1/16" (510) 19 3/16" (487) 19 13/16" (503) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 15 11/16" (398) 14 13/16" (376) 15 7/16" (392) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 36" (914) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) Cut-Out Location W H 28 3/4" (730) 27 7/8" (708) 28 1/2" (724) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 19" (483) 18 1/8" (460) 18 3/4" (476) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 48" (1219) 47 1/8" (1197) 47 3/4" (1213) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) W H 5 7/8" (149) 12 7/16" (316) A B 2" (51) 28 13/16" (732) *Panel height may be increased by 7/16" (11) to hide upper main frame. For more information, refer to the built-in panel configurator at subzero.com/trade/panels. Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specific panel grille must be ordered for an 83" or 88" overall unit height. subzero.com/specs | 23 BUILT-IN REFRIGERATION Flush Inset Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H B A H AH AH H A AH A H H H H AH A A A A B A H H B B W W W W W Flush Inset Panel Spacer Panel Backer Panel H H H H H GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W W W W W H H H H H Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-30UG Stiles / Rails 24 | H AH AH H A AH A H H H H H W W W WWWW W W W B B B H H H H H H H H H H BI-30UG / BI-36UG W W W W W BI-36UFD / BI-42UFD H H H MODEL BI-36U, BI-36UG W H 37" (940) 35 1/8" (892) 35 3/4" (908) 69 3/4" (1772) 68 15/16" (1751) H 9H H H H 69 /16" (1767) W 37" (940) A A A 35 1/8" (892) 3 B B 35 /4" (908) H 9 1/4" (235) A A 8 5/16" (211) 15/16" (227) B B 8B A B 5 3/4" (146) 10 3/8" (264) W W W W W W W W W W MODEL BI-30U, BI-30UG REFRIGERATOR H H H W W W W W BI-30U / BI-36U MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER H H H W W W W W BI-36RG H H H H B B B B B B W W W W W BI-36R / BI-36F H H H H H A A A W H 50 1/8" 31" (787) 29 1/8" (740) 29 3/4" (756) 49 5/16" (1253) 49 15/16" (1268) W H 31" (787) 29 1/8" (740) 29 3/4" (756) 19" (483) 18 1/16" (459) 18 11/16" (475) (1273) W H 31" (787) 29 1/8" (740) 29 3/4" (756) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) A B 5 3/4" (146) 5 1/4" (133) Sub-Zero Customer Care 800.222.7820 REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36UG Stiles / Rails W H 37" (940) 35 1/8" (892) 35 3/4" (908) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 37" (940) 35 1/8" (892) 35 3/4" (908) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 37" (940) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) A B 5 3/4" (146) 5 1/4" (133) MODEL BI-36UFD REFRIGERATOR (2 PANELS) Flush Inset Panels Spacer Panels Backer Panels FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel W H 18 3/8" (467) 17" (432) 17 5/8" (448) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 37" (940) 35 1/8" (892) 35 3/4" (908) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 37" (940) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) BUILT-IN REFRIGERATION WW AA HH WW HH HH BB WW WW WW WW WW Flush Inset Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel HH HH Flush Inset Panel Spacer Panel Backer Panel BB WW BI-36S / BI-42S / BI-42SID BI-48S / BI-48SID WW H 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) FREEZER AA WW W 25 9/16" (649) 24 3/16" (614) 24 13/16" (630) W H 17 3/16" (437) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE Flush Inset Panel Spacer Panel Backer Panel WW W H 43" (1092) 41 1/8" (1045) 41 3/4" (1060) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) DISPENSER (BI-42SD) BI-42SD / BI-48SD Dispenser Cut-Out Cut-Out Location MODEL BI-42UFD REFRIGERATOR (2 PANELS) Flush Inset Panels Spacer Panels Backer Panels FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel H 21 3/8" (543) 20" (508) 20 5/8" (524) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 43" (1092) 41 1/8" (1045) 41 3/4" (1060) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 43" (1092) 41 1/8" (1045) 41 3/4" (1060) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel DISPENSER (BI-48SD) Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel H 12 7/16" (316) A B 2" (51) 28 13/16" (732) MODEL BI-48S, BI-48SID, BI-48SD W Cut-Out MODEL BI-36S REFRIGERATOR W 5 7/8" (149) W H 20 9/16" (522) 19 3/16" (487) 19 13/16" (503) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 16 3/16" (411) 14 13/16" (376) 15 7/16" (392) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 37" (940) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) Cut-Out Location W H 29 1/4" (743) 27 7/8" (708) 28 1/2" (724) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 19 1/2" (495) 18 1/8" (460) 18 3/4" (476) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) W H 49" (1245) 47 1/8" (1197) 47 3/4" (1213) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) W H 5 7/8" (149) 12 7/16" (316) A B 2" (51) 28 13/16" (732) Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specific panel grille must be ordered for an 83" or 88" overall unit height. subzero.com/specs | 25 BUILT-IN REFRIGERATION TOP VIEW TOP VIEW BACKER CABINETRY SPACER BACKER SPACER CABINETRY TOP VIEW PANEL OFFSETS 5/16" (8) BACKER SPACER DOOR / DRAWER / GRILLE FLUSH INSET PANEL OVER-AND-UNDER ILLUS Door / Drawer / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom SIDE-BY-SIDE Doors (hinge) / Grille Sides Doors (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom 1/2" (13) CABINETRY 5/8" (16) 5/8" (16) 5/16" (8) 1/2" (13) CABINETRY 1/2" (13) 5/8" (16) 1/2" (13) 5/16" (8) CABINETRY C D F 1/8" 5/16" (3) GRILLE (8) CABINETRY 1/2" (13) 1/8" 5/16VIEW SIDE " (3)GRILLE (8) CABINETRY 1/2" (13) 1/8" 5/16 " (3) GRILLE SIDE VIEW (8) SIDE VIEW DOOR DOOR DOOR 1/8" (3) DOOR 5/16" 5/32 3/DRAWER (8) "32" 5/16" (4)(2) (8) DOOR /8" (16) DOOR 5/16" DRAWER 35//32 (8) Illus. 32"E " 5/16" (2) (4) (8) DOOR 5/8" (16) SIDE VIEW DRAWER 1/4" (6) REVEAL 5/16" (8) 5/16" (8) 1/8" (3) 1/8" (3) 1/4" (6) REVEAL 1/2" (13) 5/16" DOOR 3/32 5/"32GRILLE " 5/16(8) " (2)(4) (8) DOOR GRILLE 5/16" 35/32" /32" 5/(8) 16" (2) (4) (8) SIDE VIEW SIDE VIEW 1/2" (13) 1/2 5/16" DOOR GRILLE 32 (8) 53//32 "" 5/16" (4) (2) (8) DOOR GRILLE 1/8" 5/16 " (3) SIDE VIEW (8) 5/16" 32"" (8) 53//32 5/16" (4) (2) (8) SIDE VIEW SIDE VIEW 1/2" (13) Illus.DOOR D SIDE VIEW 1/2 1/2" (13) 1/8" 5SIDE VIEW /16" (3) (8) 1/2" (13) 5/16" (8) 5/32" (4) 5/16" (8) 5/32" GRILLE (4) GRILLE 1/8" 5/16" (3) (8) 1/2" (13) REVEAL 1/2 DOOR 3/32" 5/16" (2) (8) SIDE VIEW DOOR / DRAWER 3/32" 5/16" (2) (8) DOOR / DRAWER SIDE VIEW DOOR SIDE VIEW 5 DRAWER DOOR 1/4" (6) 5/16" (8) 3/32" (2) 5/8" (16) DRAWER TOP VIEW REVEAL 5/16" (8) DOOR 1/8" (3) Illus. B 5/16" (8) 3/32" (2) 5/DRAWER 32" 5/16" (4) (8) SIDE VIEW Sub-Zero Customer Care 800.222.7820 TOP VIEWREVEAL 1/4" (6) Illus. A A GRILLE B DOOR 1/4" (6) 1/4" (6) REVEAL Illus. C | 1/8" (3) DOOR DOOR 1/8DOOR " (3) ILLUS GRILLE 26 5/16" (8) 5/16" (8) FLUSH INSET PANEL A 5/16 " (8) A C GRILLE D CABINETRY E F 5/CABINETRY 8" (16) 5/16" (8) BACKER CABINETRY FLUSH INSET PANEL ILLUS C D CABINETRY F 1/2" (13) TOP VIEW 5/8" SPACER (16) Door / Grille Sides Grille Top Grille Bottom / Door Top Door Bottom TOP VIEW DOOR / DRAWER / GRILLE FLUSH INSET PANEL 1/2" (13) PANEL OFFSET ALL REFRIGERATOR / ALL FREEZER 5/16" (8) BACKER 5/8"CABINETRY SPACER TOP VIEW (16) BACKER SPACER TOP VIEW DOOR DOOR / DRAWER / GRILLE FLUSH INSET PANEL 1/2" (13) The illustrations provide panel offsets and reveals for built-in models in a flush inset application. Refer to the chart below 5/16" (8) for reference to the illustrations. DOOR DOOR DOOR TOP VIEW DOOR / DRAWER / GRILLE FLUSH INSET PANEL Flush Inset Panels TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE 5/8" (16) DOOR / DRAWER 5/16" (8) DOOR / DRAWER 5/16" (8) 5/16" (8) 53/32" 5/16" (4) (2) (8) SIDE VIEW 5 SIDE VIEW DOOR / DRAWER /8" (16) 5/16" (8) 35//32 32"" 5/16" (2) (4) (8) 5/8" (16) SIDE VIEW 3/32" (2) SIDE VIEW 5/16" DOOR / (8) DRAWER 3 5/16" (8) Illus. F SIDE VIEW 3/32" 5/16" (2) (8) 3 SIDE VIEW 5/16" (8) 5/32" 5/16" (4) (8) SIDE VIEW SIDE VIEW 3/32" (2) 3 SIDE VIEW BUILT-IN REFRIGERATION Dual Installation If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between units. A custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below. For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 20–23. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For questions regarding the installation, call Sub‑Zero customer care at 800-222-7820. WITHOUT FILLER STRIP Opposite hinges. FILLER STRIP Same side hinges. subzero.com/specs | 27 BUILT-IN REFRIGERATION Dual Flush Inset Panel Dimensions H H H H H H H H H H H H A AH AH A A A H H H H A A A A H H A AH H H H A AH AH A A A H H H H H H W W W W BI-36R / BI-36F B B W W W W W W W W BI-36RG W H 36 1/2" (927) 35 1/8" (892) H 35 3/4H" (908) 69 3/4" (1772) 68 15/16" (1751) H 9H 69 /16" (1767) GRILLE W 36 1/2" (927) A A 35 1/8" (892) 3 B B 35 /4" (908) Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W A B 5 3/4" (146) 10 3/8" (264) W W WW W W REFRIGERATOR FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-30UG Stiles / Rails 28 | W W W W W 30 1/2" (775) 29 1/8" (740) 29 3/4" (756) H H 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 19" (483) 18 1/16" (459) 18 11/16" (475) W H 30 1/2" (775) 29 1/8" (740) 29 3/4" (756) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) A B 5 3/4" (146) 5 1/4" (133) Flush Inset Panel Spacer Panel H Backer Panel FREEZER B W W 30 1/2" (775) 29 1/8" (740) 29 3/4" (756) Sub-Zero Customer Care 800.222.7820 REFRIGERATOR H 9 1/4" (235) A A 8 5/16" (211) 15 8 /16" (227)B MODEL BI-30U, BI-30UG Flush Inset Panel Spacer Panel Backer Panel H H H H W W W W W W W W W W H H H H W W BI-30UG / BI-36UG MODEL BI-36U, BI-36UG REFRIGERATOR / FREEZER H H A AH H H H H H MODEL BI-36R, BI-36RG, BI-36F Flush Inset Panel Spacer Panel Backer Panel H H H H H H BI-30U / BI-36U H H H H H H W W B B B A B B H H B B B A Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36UG Stiles / Rails W H 36 1/2" (927) 35 1/8" (892) 35 3/4" (908) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 36 1/2" (927) 35 1/8" (892) 35 3/4" (908) 19" (483) 18 1/16" (459) 18 11/16" (475) W H 36 1/2" (927) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) A B 5 3/4" (146) 5 1/4" (133) Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specific panel grille must be ordered for an 83" or 88" overall unit height. For dual wide grilles, refer to page 30. BUILT-IN REFRIGERATION TOP VIEW TOP VIEW BACKER CABINETRY SPACER BACKER SPACER CABINETRY TOP VIEW DUAL FLUSH INSET PANEL OFFSETS BACKER 5/8"CABINETRY (16) SPACER ALL REFRIGERATOR / ALL FREEZER ILLUS Door (hinge) / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom A B C CABINETRY D F OVER-AND-UNDER ILLUS A B CABINETRY C D E F GRILLE GRILLE 1/2" (13) TOP VIEW 5/CABINETRY 8" (16) 5/16" (8) 1/2" (13) BACKER 1/2" (13) CABINETRY 5/8" (16) 5/16" (8) CABINETRY 1/2" (13) 5/8" (16) 1/2" (13) 5/16" (8) 5/16" (8) DOOR 1/8" (3) DOOR DOOR 1 /8" (3) DOOR 1/4" (6) 1/4" (6) REVEAL 1/8" (3) 1/8" (3) CABINETRY 1/2" (13) 1/8" 5/16VIEW SIDE " (3)GRILLE CABINETRY 1/4" (6) REVEAL REVEAL 1/2" (13) 1/8" 5/16" (3) (8) 1/2" (13) 1/2 1/2" (13) 5/16" DOOR 3/32 5/"32GRILLE " 5/16(8) " (2)(4) (8) DOOR GRILLE 1/8" 5SIDE VIEW /16" (3) (8) 5/16" 35/32" /32" 5/(8) 16" (2) (4) (8) SIDE VIEW SIDE VIEW 1/2" (13) DOOR 1/2 5/16" 32"" (8) 53//32 5/16" (4) (2) (8) DOOR 3/32 GRILLE " 5/16" (2) (8) 1/8" 5/16 " (3) SIDE VIEW (8) SIDE VIEW SIDE VIEW 1/2 DOOR Illus. D SIDE VIEW 5/16" (8) 5/32" (4) 5/16" (8) 5/32" GRILLE (4) GRILLE Illus. B 1/8" 5/16" (3) GRILLE (8) (8) 5/16" (8) 5/16" (8) 1/4" (6) Illus. A 3/32" 5/16" (2) (8) DOOR / DRAWER DOOR / DRAWER SIDE VIEW 5/16" (8) 3/32" (2) 5/16" (8) 3/32" (2) DOOR 5/8" (16) 5/16" 5/32 3/DRAWER (8) "32" 5/16" (4)(2) (8) DOOR SIDE VIEW 5 /8" (16) DRAWER TOP VIEW REVEAL TOP VIEWREVEAL REVEAL Illus. C DOOR DOOR 1/4" (6) 1/4" (6) FLUSH INSET PANEL GRILLE SIDE VIEW DRAWER 1/8" (3) DOOR DOOR 1/8DOOR " (3) DUAL TRIM 1/2" (13) DOOR TOP VIEW 5/16" (8) 5/16" (8) DOOR / DRAWER / GRILLE FLUSH INSET PANEL 5/8" SPACER (16) PANEL OFFSET Door (hinge) / Drawer / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom 5/16" (8) 1/2" (13) The illustrations provide panel offsets and reveals for built-in FLUSH INSET PANEL models in a dual flush inset application. Refer to the chart 5/16" (8) below for reference to the illustrations. TOP VIEW DOOR DOOR / DRAWER / GRILLE FLUSH INSET PANEL 5/16" (8) BACKER SPACER DOOR DOOR DOOR TOP VIEW DOOR / DRAWER / GRILLE FLUSH INSET PANEL Dual Installation TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE 5/DRAWER Illus. 32E " 5/16" (4) (8) DOOR SIDE VIEW DRAWER 5/8" (16) DOOR / DRAWER 5/16" (8) DOOR / DRAWER 5/16" (8) 5/16" (8) 53/32" 5/16" (4) (2) (8) SIDE VIEW 5 SIDE VIEW /8" (16) 5/16" (8) 35//32 32"" 5/16" (2) (4) (8) 5/8" (16) SIDE VIEW 3/32" (2) SIDE VIEW 5/16" DOOR / (8) DRAWER 3 5/16" (8) Illus. F SIDE VIEW 3/32" (2) 3 SIDE VIEW 5/16" (8) 5/32" 5/16" (4) (8) 3 SIDE VIEW SIDE VIEW subzero.com/specs | 29 BUILT-IN REFRIGERATION Dual Installation DUAL WIDE GRILLE DUAL WIDE GRILLE—FLUSH INSET A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. TWO 30" MODELS W H Flush Inset Panel Spacer Panel Backer Panel 61 1/4" (1556) 59 3/8" (1508) 60" (1524) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 84" (2134) finished height. DUAL WIDE GRILLE—OVERLAY TWO 30" MODELS Overlay Panel Spacer Panel Backer Panel 30" MODEL AND 36" MODEL Overlay Panel Spacer Panel Backer Panel TWO 36" MODELS Overlay Panel Spacer Panel Backer Panel 30 | 30" MODEL AND 36" MODEL Flush Inset Panel Spacer Panel Backer Panel W H 67 1/4" (1708) 65 3/8" (1661) 66" (1676) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) W H TWO 36" MODELS W H 60 1/4" (1530) 59 3/8" (1508) 60" (1524) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) Flush Inset Panel Spacer Panel Backer Panel 73 1/4" (1861) 71 3/8" (1813) 72" (1829) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) W H 66 1/4" (1683) 65 3/8" (1661) 66" (1676) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) W H 72 1/4" (1835) 71 3/8" (1813) 72" (1829) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) Sub-Zero Customer Care 800.222.7820 BUILT-IN REFRIGERATION Side Panel Handle Hardware The custom side panels must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for the length and stud spacing of standard handles for built-in models. STANDARD HANDLES FULL DOOR Tubular Pro OVER-AND-UNDER DOOR 24" (610) FRONT OF SIDE PANEL Tubular Pro 30" DRAWER 1" (25) 1 7/8" (48) Tubular Pro 36" DRAWER Tubular Pro 1/8" (3) 1/2" (13) ROUT TO 1/8" (3) 1 7/8"(48) 84" 1" (25) MAIN FRAME 42" DRAWER SIDE PANEL ROUTING Tubular Pro LENGTH STUD SPACING 63 7/8" (1622) 45 3/16" (1147) 43 7/8" (1114) 43 7/8" (1114) LENGTH STUD SPACING 44 1/4" (1124) 37 1/2" (952) 36 1/4" (921) 36 1/4" (921) LENGTH STUD SPACING 24 5/16" (633) 17 9/16" (447) 16 5/16" (414) 16 5/16" (414) LENGTH STUD SPACING 30 5/16" (770) 23 5/8" (600) 22 5/16" (567) 22 5/16" (567) LENGTH STUD SPACING 36 5/16" (922) 29 5/8" (753) 28 5/16" (719) 28 5/16" (719) (2134) Routing detail. 4 1/4" (108) ROUT TO 3/16" (5) (OVER-AND-UNDER MODELS) 5 3/4" (146) 20 1/2" (521) 4" (102) OPTIONAL TOE KICK CUT-OUT 2 5/8" (67) Side panel dimensions. subzero.com/specs | 31 BUILT-IN REFRIGERATION Framed Panels FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL 1/4" (6) FRAMED PANEL DOOR Framed panel thickness. 32 | Sub-Zero Customer Care 800.222.7820 BUILT-IN REFRIGERATION Overlay and Flush Inset Panels FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 1" 2" (25) (51) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .10" (3) SPACER PANEL 1/4" (6) BACKER PANEL DOOR Overlay and flush inset panel thickness. subzero.com/specs | 33 BUILT-IN REFRIGERATION Overlay Application FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view). 34 | Sub-Zero Customer Care 800.222.7820 BUILT-IN REFRIGERATION Flush Inset Application FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 110° door opening (top view). subzero.com/specs | 35 BUILT-IN REFRIGERATION FILLER STRIP 11/4" (32) APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation FULL-SCALE TEMPLATE Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view). 36 | Sub-Zero Customer Care 800.222.7820 DOOR CLOSED DOOR OPEN 110° BUILT-IN REFRIGERATION FILLER STRIP 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE Dual Flush Inset Installation DOOR CLOSED DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual flush inset installation (top view). subzero.com/specs | 37 Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours. FULL FIVE YEAR SEALED SYSTEM WARRANTY For five years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours. LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. If the owner uses Sub-Zero factory certified service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certified service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certified service or other sources. TERMS APPLICABLE TO EACH WARRANTY The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair. THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state. To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com, email us at [email protected] or call 800-222-7820. *Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects. *Replacement water filters and air purification cartridges are not covered by the product warranty. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries. SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SZBIDG 1 / 2014 SUBZERO.COM 800.222.7820