Download Sony STRDG510 User's Manual

Models of area code KR
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
85 W + 85 W1)
70 W + 70 W3)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
100 W + 100 W1)
90 W + 90 W3)
Surround Mode Output Power2) (8 ohms, 1 kHz,
THD 10%)
130 W/ch1)
120 W/ch3)
Models of area code TH6
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
70 W + 70 W1)
60 W + 60 W3)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
80 W + 80 W1)
70 W + 70 W3)
Surround Mode Output Power2) (8 ohms, 1 kHz,
THD 10%)
120 W/ch1)
100 W/ch3)
1) Measured
under the following conditions:
Area code
Power requirements
U, CA
120 V AC, 60 Hz
CEL, CEK, KR,
TH6, SP
230 V AC, 50 Hz
E2, AU
240 V AC, 50 Hz
TW
110 V AC, 60 Hz
4)
INPUT SHORT (with sound field and tone
bypassed).
5) Weighted network, input level.
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
2)
Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
3) Measured under the following conditions:
Area code
Power requirements
KR, TH6
220 V AC, 50 Hz
68GB
Frequency response
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog
Sensitivity: 500 mV/
50 kohms
S/N4): 96 dB
(A, 500 mV5))
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT
Voltage: 500 mV/10
kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels
±6 dB, 1 dB step
Area code
Tuning scale
10 kHz step
U, CA
CEL, CEK, AU, TW, –
KR, TH6, SP
E2
9 kHz step
530 –
531 –
1,710 kHz6) 1,710 kHz6)
531 –
1,602 kHz
530 –
531 –
1,610 kHz6) 1,602 kHz6)
Antenna
Loop antenna
Intermediate frequency
450 kHz