Download Sony STR-DB1070 User's Manual

Troubleshooting (continued)
Reference sections for clearing the
receiver’s memory
To clear
See
All memorized settings
page 18
Customized sound fields
page 37
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
STR-DB1070:
FRONT1):100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
SURR BACK1): 100 W
STR-DB870:
FRONT1): 100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
STR-DB1070:
FRONT:1) 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
SURR BACK1): 90 W
STR-DB870:
FRONT1):90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
52
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
STR-DB1070:
100 W + 100 W2)
90 W + 90 W3)
STR-DB870:
100 W + 100 W2)
(4 ohms 1 kHz, THD 0.7 %)
STR-DB1070:
90 W + 90 W2)
80 W + 80 W3)
STR-DB870:
100 W + 100 W2)
Reference Power Output2)
(8 ohms 1 kHz, THD 0.7 %)
STR-DB1070:
FRONT1): 100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
SURR BACK1): 100 W
STR-DB870:
FRONT1): 100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
(4 ohms 1 kHz, THD 0.7 %)
STR-DB1070:
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
SURR BACK1): 90 W
STR-DB870:
FRONT1): 100 W + 100 W
CENTER1): 100 W
SURR1): 100 W + 100 W
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
STR-DB1070:
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
SURR BACK1): 90 W
STR-DB870:
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
STR-DB1070:
FRONT1): 80 W + 80 W
CENTER1): 80 W
SURR1): 80 W + 80 W
SURR BACK1): 80 W
STR-DB870:
FRONT1): 90 W + 90 W
CENTER1): 90 W
SURR1): 90 W + 90 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
Power requirements
E
240 V AC, 50 Hz
CN, SP, CEL
230 V AC, 50 Hz
TW
110 V AC, 60 Hz
3) Measured under the following conditions:
Area code
Power requirements
CN
220 V AC, 50 Hz