Download Sony XS-HF500G User's Manual
Transcript
2002 SONY MOBILE PRODUCT GUIDE 1-piece Aluminum Cone/ Voice Coil Former 170W max input power (55W RMS) Gold-plated 5-way Binding Posts Die-cast Aluminum Chassis - ® Heatsink Aluminum Xplod Neodymium & Samarium Magnets 1 Aluminum Dome Tweeter Variable mounting 12dB/oct HP/LP Crossover Gold screw terminals XS-HF500G 5¼” Component Separates Specifications Speaker Maximum input power Rated input power Impedance Sensitivity Frequency response Crossover frequency Mass Separate type, 2-way Woofer 15 cm (6 in.), cone type Tweeter 2.5 cm (1 in.), dome type 170 W 55 W 4 ohms 90 dB/W/m 32 30,000 Hz 5,000 Hz, 12 dB/oct Woofer: Approx. 880 g (1 lb. 12 oz.) per speaker Tweeter: Approx. 60 g (2 oz.) per speaker Passive crossover network: Approx. 170 g (6 oz.) Features The XS-HF500G consists of two tweeters and two woofers. The tweeters and woofers can be mounted in separate locations. The innovative aluminum vibrator is employed on both tweeters and woofers, ensuring greatest sound reproduction of powerful bass and speedy treble. The tweeters can be mounted on the front door panels or dashboard. High quality passive crossover network supplied. Design and Specifications subject to change without notice. 2002 SONY MOBILE PRODUCT GUIDE XS-HF500G 5¼” Component Separates Dimensions Unit: mm (in.) ø 41 (1 5/8) ø 48 (1 15/16) Tweeter 12 (1/2) 13 ( /32) ø 48 (1 15/16) 17 32 (1 5/16) 27 (1 1/8) 28 (1 1/8) 44 (1 3/4) Woof er 47 (1 7/8) 38 (1 1/2) 24 ( 31/32) 31 (1 1/4) 48 (1 15/16) 12 ( 1/2) 49 (1 15/16) 55 (2 1/4) 32 (1 5/16) 60 (2 3/8) 50 (2) 50 (2) ø 142 (5 5/8) ø 154 (6 1/8) ø 132 (5 1/4) 27 (1 1/8) Passive crossover network 26 (1 1/16) 65 (2 5/8) 115 (4 5/8) Design and Specifications subject to change without notice. 17 (11/16) 53 (2 1/8) ø 147 (5 7/8) ø 4.5 ( 3/16) ø 119 (4 3/4) ø 4.5 ( 3/16)