Download Snapper 4531 User's Manual

Attachment
Illustrated
Parts List
Attachment
Mfg. No.
Description
1695168
Catcher, Clean Sweep Twin, 38"
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright 2007 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.
Part No.: 1734816
Rev. 04/2007
TP 400-4537-00-AT-SMA
Table Of Contents
PRODUCT COMPONENTS
PAGES
Twin Catcher Assembly .......................................................................................................................................
4
Torque Specification Chart ..................................................................... Inside Back Cover
Twin Catcher Assembly
1695168
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1695168 - Catcher
Briggs and Stratton Yard Power Products Group
Copyright © 2007 by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
TP 400-4537-00-AT-SMA
Twin Catcher Assembly
REF NO PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
1733564SM
1960404SM
054537MA
1933896SM
1675707SM
1703764SM
1733491SM
1931333SM
1703807ASM
1672023ASM
1917356SM
1917372SM
1664847SM
1733613ASM
1928352SM
1734228ASM
1707526ASM
1934654SM
1733627SM
1960033SM
1728976SM
1960717SM
1704977SM
1927557SM
1703765ASM
1674669SM
1935048SM
1679163SM
1931339SM
1960371SM
1704355ASM
1704341SM
1920283SM
1732561SM
1960185SM
1704603SM
1703769SM
1919326SM
1960122SM
1733741SM
1732735ASM
1960074SM
1925003SM
054407ZMA
QTY. DESCRIPTION
1
8
1
8
2
2
2
5
2
2
4
4
7
1
8
1
1
8
1
1
2
2
1
4
1
2
5
1
3
3
1
1
1
1
1
1
1
1
1
1
1
2
4
2
COVER ASSEMBLY, Twin Catcher
SCREW, Truss Head Phillips, 10 - 24 x 3/4
HANDLE, Plastic
NUT, Hex Lock w/Nylon Insert, 10 - 24
CLIP, Tube Grass Bag
BAG, Grass White Poly
HOOP, Twin
BOLT, Carriage, 5/16 - 18 x 3/4 (Qty. of 1 included in Ref. No 57)
HANGER, Grass Bag
CLAMP, Grass Bag Plain
LOCKWASHER, Spring, 5/16
NUT, Hex, 5/16 - 18
SCREW, Hex Washer Head Taptite, 5/16 - 18 x 3/4
BRACKET, Tab Cross Support Twin
NUT, Hex Whiz Lock Flange (Included in Ref. No 57)
CHANNEL, Cross Support Twin
SUPPORT, Upright
SCREW, Hex Whiz Lock Flange (Included in Ref. No 57)
SUPPORT ASSEMBLY, Regent Catcher
CLIP, Hair Pin (Included in Ref. No 57)
BOLT, Shoulder, 5/16 - 18 (Included in Ref. No 57)
NUT, Speed, 5/16 - 18 (Included in Ref. No 57)
BLADE, Mower 22.3" Hi-Lift
NUT, Hex Whiz Lock Flange, 5/16-18 (Included in Ref. No 57)
BAFFLE, 38"
SPACER (Included in Ref. No 57)
NUT, Hex Two-Way Lock Flange, 5/16 - 18 (Qty. of 4 included in Ref. No 57)
WINGNUT ASSEMBLY (Included in Ref. No 57)
BOLT, Carriage, 5/16 - 18 x 2 (Included in Ref. No 57)
SCREW, Hex Head, 5/16 - 18 x 3/4 (Included in Ref. No 57)
BRACKET, Offset (Included in Ref. No 57)
WASHER, Special (Included in Ref. No 57)
WASHER (Included in Ref. No 57)
ADAPTER, 38"
WASHER, 5/16
LATCH, Tube
TUBE, Transfer
WASHER, 5/16
SCREW, Hex Head, 5/16 - 18 x 3/4
SEAL, Cover
FLANGE, Seal
CLIP, Hair Pin (Included in Ref. No 57)
SCREW, Hex Washer Head Taptite, 1/4 - 20 x 1/2
PIN, Cover Hinge (Included in Ref. No 57)
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695168 - Catcher
Briggs and Stratton Yard Power Products Group
Copyright © 2007 by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
TP 400-4537-00-AT-SMA
Twin Catcher Assembly
1695168
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1695168 - Catcher
Briggs and Stratton Yard Power Products Group
Copyright © 2007 by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
TP 400-4537-00-AT-SMA
Twin Catcher Assembly
REF NO PART NO.
48
49
50
51
52
53
54
55
56
57
--
QTY. DESCRIPTION
1733903ASM
1930595SM
1733948ASM
1733970ASM
1673320SM
1910531SM
1732488SM
1732490SM
1734384SM
1660950SM
1
2
1
1
18
12
1
6
1
1
1733729
1
PLATE, Reinforcement
SCREW, Hex Whiz Lock Flange, 5/16 - 18 x 1-1/4 (Included in Ref. No 57)
PLATE, Reinforcement, Upright (Included in Ref. No 57)
BRACKET, Deflector Prop (Included in Ref. No 57)
RIVET, Pop, 3/16
WASHER, Rivet, 3/16
SCREEN, Twin Cover
FASTENERS, Push, 1/4 x 1/2
SCREEN SUPPORT, Twin
HARDWARE BAG (Not Shown. Includes Ref. Nos. 8, 15, 18, 20, 21, 22, 24, 26, 27, 28, 29,
30, 31, 32, 33, 42, 44, 49, 50 & 51)
INSTRUCTION MANUAL
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695168 - Catcher
Briggs and Stratton Yard Power Products Group
Copyright © 2007 by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
TP 400-4537-00-AT-SMA
Hardware Identification & Torque Specifications
Common Hardware Types
Torque Specification Chart
Hex Head Capscrew
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Washer
Hardware
Grade
Lockwasher
Carriage Bolt
No
Marks
SAE Grade 2
Hex Nut
Size Of
Hardware
Standard Hardware Sizing
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4
Nut, 1/2”
1/2
Inside
Diameter
3/4
1
1/4
1/2
3/4
Screw, 1/2 x 2
2
1/4
Body
Diameter
in/lbs
ft/lbs
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
Nm.
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
SAE Grade 5
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
27
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
1/2
Body
Length
3/4
3
1/4
1/2
3/4
4
Wrench & Fastener Size Guide
1/4
5/16
3/8
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”