Download Senco DuraSpin DS200-D2 User's Manual

Corded Screw Fastening Systems
DuraSpin™ DS300-D2 H: 9" L: 40" W: 7.4 lbs
2500 RPMs of corded power for contractors or remodelers doing floor sheathing and decking. Drives 2"- 3" screws.
Screw Lengths: 2" to 3" (50 – 75 mm)
Screw Diameters: #7– #10
Capacity: 50 screws (one strip)
The DS300-D2 and DS200-D2
come complete with:
• 2500 RPM screw gun
• flooring extension
• 2 spare bits
• optional nosepiece (DS200-D2)
Benefits
• Ergonomic design – Drive screws
from a comfortable standing position,
or remove the extension for
close-up work
• Unique sliding rail feeds even 3"
screws effortlessly
• Easy depth-of-drive adjustment
• Quick release for easy bit access
• Super-tough drive bits
• Flooring extension snaps on and off
in seconds
#8 X 2"
Exterior Wood to Heavy Steel
PREMIUM Exterior Wood to Wood (Decking)
#8 X 21/2"
#8 X 3"
Interior Wood to Wood
#8 X 2"
#10 X 2"
#8 X 21/2"
#8 X 3"
2500 RPMs of corded power for contractors or remodelers doing floor sheathing, decking and drywall. Drives 1"- 2" screws
#8 X 13/4" #8 X 2"
Exterior Wood to Heavy Steel
Applications
Exterior Decking, Wood to Heavy Steel,
Floor Sheathing, Drywall to Wood,
Drywall to Steel
#9 X 3"
#8 X 2"
Applications
Exterior Decking, Wood to Heavy Steel,
Floor Sheathing
Benefits
• Ergonomic design – Drive screws from
a comfortable standing position, or
remove the extension for
close-up work
• Easy depth-of-drive adjustment
• Quick release for easy bit access
• Super-tough drive bits
• Flooring extension snaps on and off in
seconds
#8 X 21/2"
Exterior Wood to Wood (Decking)
DuraSpin™ DS200-D2 H: 9" L: 38" W: 7.3 lbs
Screw Lengths: 1" to 2" (25– 50 mm)
Screw Diameters: #6– #10
Capacity: 50 screws (one strip)
#8 X 21/2"
#8 X 13/4"
Exterior Wood to Wood (Decking)
#8 X 11/2" #8 X 13/4"
Interior Wood to Wood
Drywall to Heavy Gauge Steel
#6 X 11/4"
Drywall to Light Gauge Steel
#6 X 11/4"
Drywall to Wood
#6 X 1" #6 X 11/4"
#6 X 15/8"
#8 X 2"
#8 X 2"
#10 X 2"
#7 X 2"
Corded Screw Fastening Systems
DuraSpin™ DS200-D4 H: 9" L: 18.5" W: 4.9 lbs
4000 RPMs of corded power especially for professional drywallers.
Benefits
• Pain-Free Productivity – Duraspin collated screws make even
the novice or apprentice user as fast as the most experienced
bulk screw user
• Reduced waste – eliminate the waste experienced with bulk
screws (can be 10% to 15% of total screws used.)
• Precise depth-of-drive adjustment
• Quick release for easy bit access
Applications
Drywall (to Wood or Steel) applications
Drives 1" to 2" screws.
Screw Diameters: #6, #7
The DS200-D4 comes
complete with:
• 4000 RPM screwgun
• two spare bits
• rugged carrying case
Drywall to Heavy Gauge Steel
#6 X 11/4"
Drywall to Light Gauge Steel
#6 X 11/4"
Drywall to Wood
#6 X 1" #6 X 11/4" #6 X 15/8" #7 X 2"