Download Schneider Electric V334 User's Manual
Transcript
70012-1296-00 08/2008 ADDENDUM What’s New in v334 Firmware version 334 (v334) for the ION8800 meter offers Modbus Master over TCP/IP. This allows the ION8800 to read or record data from Modbus slave devices using up to ten available TCP sockets. The Modbus Master over TCP/IP utilizes one specific, dedicated communications connection that is independent of the existing available maximum 4 simultaneous Ethernet connections. Ethernet Connections for the ION8800 NEW TCP/IP Modbus Mastering dedicated TCP port. Connect with up to 10 Modbus slave IP addresses 4 simultaneous connections. Protocols include ION, DNP, Modbus, etc. SMTP Server (email) outgoing only NOTE To support the new features in v334, download the latest version of ION Setup from www.global.powerlogic.com. Modbus Master over TCP/IP must be configured through ION Setup or ION Enterprise software. See the ION8800 User Guide for instructions. ION, ION Enterprise, MeterM@il, Modbus, Power Measurement, PowerLogic,Schneider Electric, Square D and WebMeter are either trademarks or registered trademarks of Schneider Electric in France, the USA and other countries. All other trademarks are property of their respective owners. Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. © 2008 Schneider Electric. All rights reserved. www.global.powerlogic.com As a master, the ION8800 can aggregate data from multiple slave devices and then pass it to ION software for analysis. Modbus Master also gives you control of devices on a Modbus network with the meter’s write capability. There are two communication links to consider when you Modbus Master with the ION8800: the link between the ION software and the ION8800, and the link between the ION8800 and the Modbus network. What’s New in v334 With Modbus Master over TCP/IP, you can enter up to ten unique IP addresses that belong to Modbus devices you want to master via the ION8800. Link to Modbus device using the device’s IP address Modbus device data 192.168.0.1 ION8800 Up to 10 unique IP addresses can be entered for Modbus Mastering Ethernet Ethernet Please refer to the ION8800 User Guide, ION Reference, and the Modbus and ION Technology Technical Note for details on how to implement Modbus Master over TCP/IP. Page 2 © 2008 Schneider Electric. All rights reserved.