Download Ricoh 152235 User's Manual

AdonisC4-AE_copy_F_FM_forPaper.book Page 81 Thursday, May 12, 2005 4:17 PM
If You Cannot Make Copies As You Want
❖ Edit
Problem
Causes
Solutions
In Double Copies mode,
parts of the original image
are not copied.
Combination of original
and copy paper is not correct.
Select A3L for A4 K originals and
A4 for A5 originals.
In Border, Centre, or Centre/Border mode, parts of
the original image are not
copied.
You set a wide erased mar- Make the margin width narrower.
gin.
You can adjust it between 2–99 mm
(0.1"–3.9"). See p.97 “Erase Border
Width”and p.97 “Erase Centre
Width”.
Originals are not scanned
correctly.
3
Place the originals correctly.
In Margin Adjustment
mode, parts of the original
image are not copied.
You set a wide erased mar- Set a narrower margin with User
gin.
Tools. You can set the width between 0–30 mm (0"–1.2"). See p.97
There is a lack of margin
“Front Margin: Left/Right”, p.97
space on the opposite side
“Front Margin: Top/Bottom”, p.97
of the binding position.
“Back Margin: Left/Right”, and
p.97 “Back Margin: Top/Bottom”.
In Image Repeat mode, the
original image is not copied repeatedly.
You selected copy paper
the same size as the originals, or you did not select
the proper reproduction
ratio.
Select copy paper larger than the
originals.
Problem
Causes
Solutions
The stamp position is
wrong.
The paper orientation is
wrong.
Check the paper orientation and
stamp position.
Select the proper reproduction ratio.
❖ Stamp
81