Transcript
Wood Inserts I3100 Wood Insert I3100 Large Wood Insert Firebox height is 22-3/4" at highest point 27-1/2" 3-1/8" 6" Dia. Flue 12-7/8" 16" 9-7/8" 6-7/8" 1-3/8" 3-7/8" to front face Faceplate 27-3/4" 32-5/16" I3100 Di i Minimum Fireplace Opening Height Dimension Description 25” (635mm) I3100 A Adjacent Side Wall (to side) 13” (330mm) 19” (480mm) Width 28” (711mm) B Mantle (to top)** Depth 17” (432mm) C Top Facing (to top) D Side Facing (to side) E Minimum Hearth Extension* 16” (406mm) F Minimum Heath Thickness* 1-1/2” (38mm) G Minimum Hearth Side Extension Faceplate Dimensions Standard Oversize 44” (wide) x 32” (height) 50” (wide) x 34.5” (height) 18” (455mm) 6-1/2” (165mm) 8” (205mm) Side and Top facing is a maximum of 1-1/2" thick. Floor protection must be non-combustible, insulating material with an R value of 1.1 or greater. Wood Inserts * If the hearth extension is flush with the floor (F) it must extend 19-1/2" in front of the body face (E). Note: Hearth Extension Width (G) is measured from edge of fuel door to side of hearth. ** A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non-combustible board. 190 June 2007 Regency Product Specifications Book