Download RCA VG4251 User's Manual

Using the Remote Control
VCR Function Buttons
VCR Function Buttons
CHANNEL Up or Down
Selects next higher or lower
channel in the VCR’s channel
memory.
POWER
TV•VCR
PLAY
REW
REC
INPUT
1
4
7
PREV CH
STOP
DISPLAY
2
PAUSE
SPEED
6
5
DISPLAY
Shows VCR operating displays
on the TV screen.
Displays the time counter.
FF (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
9
8
Allows you to change entries
when setting the clock or VCR for
a timer recording.
F.ADV (Frame Advance)
Lets you view one frame with
each press of the button while the
tape is paused.
3
Searches the picture in forward
motion during playback.
0
CLEAR
MENU
SEARCH
-
F.ADV
FF
CLEAR
Resets time counter to 0:00:00.
CHANNEL
TRACKING
+
SLOW
INPUT
Turns the line input on or off.
VID1 appears in VCR’s display
panel and VIDEO appears on TV
screen.
Line input refers to the signal
coming from the component
connected to the AUDIO/VIDEO
IN jacks on the back of the VCR.
MENU
Displays the VCR MAIN MENU
on the TV screen.
Removes a menu from the
screen.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then
press the other two numbers.
PLAY
Plays a tape.
POWER
Turns the VCR on and off.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two
channels.
REC
Starts VCR recording.
Used for one touch recording .
See page 20.
REW (Rewind)
Rewinds the tape when the VCR
is stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX and ZERO
SEARCH menus on TV.
Lets you advance tape 60 or 120
seconds during playback.
SLOW
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed
(SP or SLP).
STOP
Stops the normal functions such
as record, playback, rewind, fast
forward, and pause.
TRACKING – and +
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
11