Download Quantum Instruments MS3580 User's Manual

Transcript
INTRODUCTION
Caution and Serial Number Labels
Figure 2.
Cable Removal
1.
Locate the small ‘pin-hole’ on the side of
the QuantumT near the cable.
2.
Bend an ordinary paperclip into the shape
shown.
3.
Insert the paperclip (or other small metallic
pin) into the small ‘pin-hole’.
4.
You will hear a faint ‘click’ when the cable
lock is released. Pull gently on the strainrelief of the PowerLink cable to remove it
from the scanner.
Figure 3.
Maintenance
Smudges and dirt can interfere with the proper scanning of a bar code.
Therefore, the output window will need occasional cleaning.
1.
2.
Spray glass cleaner onto a lint free, non-abrasive cleaning cloth.
Gently wipe the scanner window.
5