Download Polycom SIP 2.2.2 User's Manual
Transcript
Administrator’s Guide SoundPoint IP / SoundStation IP Attribute Permitted Values Interpretation feature.x.enabled 0 or 1 (default) except for x=9 If set to 0, the feature will be disabled. If set to 1, the feature will be enabled and usable by the local user. Note: The "url-dialing" feature must be disabled by setting feature.9.enabled to 0 in order to prevent unknown callers from being identified on the display by an IP address. Note: The “call list” feature can be disabled on all SoundPoint IP and SoundStation IP platforms except the SoundPoint IP 330/320. Resource <res/> This attribute’s settings control the maximum size or an external resource retrieved at run time. This attribute also includes: • Finder <finder/> • Quotas <quotas/> Finder <finder/> This configuration attribute is defined as follows: Attribute res.finder.sizeLimit Permitted Values positive integer Default Interpretation 300 If a resource that is being downloaded to the phone is larger than this value * 1024 bytes (= the maximum size), the resource will be automatically truncated to the maximum size defined. Note: For the SoundPoint IP 650 platform, this value is internally replaced by 2X the value. res.finder.minfree 1 to 2048 600 A resource will not be downloaded to the phone if the amount of free memory is less than this value * 1024 bytes (= the minimum size). This parameter is used for 16MB SDRAM platforms and scaled up for platforms with more SDRAM. If set to 0 or Null, the default value of 600 is used. Note: For the SoundPoint IP 650 platform, this value is internally replaced by 2X the value. A - 78