Transcript
7 8 4 5 2 3 1 Dimensions shown in inches and (mm) 20.040 (509) 17.200 (436.88) 16.000 (406.4) 10.000 (254) D *6 *7 *1 D Ø0.406" x 2.00" (10.31 x 50.8) (X6) 18° 3.250 (82.55) 6.571 (166.9) *1 8.000 (222.25) : FLA T PA N PUR EL FOR IL POS E ON LUSTRA LY TION 5.000 4.500 (127) (114.3) C *4 16.000 (406.4) 18.532 20.665 (470.71) (524.89) 8.000 (222.25) 6.846 (173.89) NOT E *5 C 4.500 (114.3) 3.394 (86.21) 3.250 (82.55) 6.751 (171.48) Ø0.406 (10.31) (X4) 3.250 (82.55) 1.125 (28.58) 2.125 (53.98) 34.500 (876.3) 2.663 (67.64) B B HORIZONTAL MOUNTING VERTICAL MOUNTING NOTES: *1 - M6 x 12 phillips screws for additional security when mounting to tilt mounts, ceiling adapters and floor stands only. *2 - Cable access holes *3 - 4.5" hole pattern for ceiling adapters and floor stands. *4 - Wall plate *5 - Mounting bracket *6 - Jack screw *7 - Set Pins (X2) BID SPECIFICATIONS A CONSTRUCTION OF THE PWM-6121 - 12 (ga) CRS MOUNTING TO 16" WOOD STUDS ALL SHARP EDGES ARE BROKEN FOR A SMOOTH FINISH MAXIMUM BEND RADIUS ARE (.06) (.03) DRAWINGS ARE INTERPRET BY (Y14.5) 8 7 TITLE PWM-6121 5 6 4 3 2 1 A