Transcript
K-3950 TRESHAMTM COMFORT HEIGHT® TOILET Roughing-In Product Information Applicable product: Comfort Height® toilet Fixture: Configuration Water per flush Passageway Water area Water depth from rim Seat post hole centers K-3950 TM TM two-piece, elongated 1.28 gpf (4.8 lpf) 2-1/8″ (54 mm) 11-1/2″ (292 mm) x 9″ (229 mm) 5-3/8″ (137 mm) 5-1/2″ (140 mmm) Included components: Bowl Tank Tank cover Trip lever Tank accessory pack Bolt cap accessory pack 7/8" (22 mm) Recommended accessories: Angle supply with stop – 3/8″ NPT K-7637 Lustra elongated open-front toilet seat - for K-4650 Accessibility compliance Brevia elongated toilet seat K-9375 K-4799 K-4899 1146775 1161319 84581 1013092 Optional accessories: Left-hand trip lever (non-CP) K-9375 Installation Notes Install this product according to the installation guide. Will comply with the American Disabilities Act (ADA) when installed per the requirements of the Accessibility Guidelines, Section 604 Water Closets, of the Act, which include the installation of an open front seat. Will comply with CSA B651 when installed per Clause 4.3.6 of the standard. Will comply with OBC Barrier Free requirements when installed per Clause 3.8.3.8 and 3.8.3.9. Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal. 30-1/4" (768 mm) 8-1/16" (205 mm) 16-5/8" (422 mm) Front of Bowl 10" (254 mm) 15-9/16" (395 mm) 31-1/4" (794 mm) 3-1/2" (89 mm) 16-1/2" (419 mm) 3/8" NPT Supply 10-1/4" (260 mm) 5" (127 mm) 12" (305 mm) CL Of Toilet TRESHAMTM COMFORT HEIGHT® TOILET 1161312-1-C 4-1/2" (114 mm)