Transcript
ELECTRIC POWER TOOLS 6842 6845 / 6845L Variable Speed, Reversible High torque model for driving screws up to 2-15/16” long High torque model for driving screws up to 2-3/16” long • Rigid aluminum casing • Stopper base with anti-tilt device for preventing screws from swaying • Rubber cap securely adhered to stopper base • Dust-proof construction for smooth sliding action • Silent clutch for reduced maintenance and quiet operation • Rigid aluminum casing • Stopper base with anti-tilt device for preventing screws from swaying • Rubber cap securely adhered to stopper base • Dust-proof construction for smooth sliding action • Silent clutch for reduced maintenance and quiet operation New compact and lightweight design for high maneuverability STANDARD EQUIPMENT 6844 INCLUDES: 3/Square Bit 2-182(784647-5), Belt Clip(345831-3) plus Thumb Screw(265734-4), Plastic Carrying Case(824808-6) 6844L INCLUDES: Same as 6844 plus extension handle (194500-1) STANDARD EQUIPMENT INCLUDES: 5 - (B-10481) Phillips 2-162L(5/pk), Belt Clip(345831-3) plus Thumb Screw(265734-4), Plastic Carrying Case(824808-6) • • • • • • • SPECIFICATIONS STANDARD EQUIPMENT 6845 INCLUDES: 3- (784241-3) Phillips 2-122,Belt Clip (345831-3) w/Thumb Screw (265734-4),Plastic Carrying Case (824813-3) 6845L INCLUDES: Same as 6845 plus extension handle (194500-1) 17-1/4” (440 mm) 39-1/8” (990.6 mm) 8.2 ft (2.5 m) 4.4 lbs. (2.0 kg) Hex shank Screw capacity: No load speed AMPS (120 V) Overall length Cord length Net weight Autofeed Screwdriver Collated Screws Phillips 1/4” (6.3 mm) 1” to 2-3/16” (25mm to 55mm) 4,700 RPM 4.3 15-3/4” ( 381 mm) 8.2 ft (2.5 m) 4.4 lbs. (2.0 kg) 1/4” (6.5 mm) 1” to 1-5/8” (25 to 41 mm) 4,700 RPM 4.3 13-1/8” (333 mm) 39-1/8” (990.6 mm) 8.2 ft (2.5 m) 4.2 lbs. (1.9 kg) Extension Handle Accessories Eliminates climbing a ladder for ceiling work or constant bending and kneeling when building decks or sub-floors. For Models: BFR540Z, BFR540L, BFR550Z, BFR550L BFR750Z, BFR750L, 6844, 6844L 6845, 6845L, 6834, 6834VLS (192501-3) For models: 6830, 6832, 6834 (194500-1) For models: 6844, 6845 Application Thread Coating Interior / Exterior Size Qty. Part # Drywall to Metal Drywall to Wood Drywall to Wood Fine Coarse Coarse Phosphate Phosphate Phosphate Interior Use Interior Use Interior Use #6 x 1-1/4” #6 x 1-1/4” #6 x 1-5/8” 1000 1000 1000 A-12407 A-13138 A-13144 Wood to Wood Wood to Wood Wood to Wood Wood to Wood Coarse Fine/Coarse Fine/Coarse Fine/Coarse Ultra Coated Ultra Coated Ultra Coated Ultra Coated Exterior Use Exterior Use Exterior Use Exterior Use #6 x 1-5/8” #8 x 1-3/4” #8 x 2” #8 x 2-1/4” 1000 1000 800 600 772210-A 772211-A 772212-A 772213-A Wood to Wood Wood to Wood Fine/Coarse Fine/Coarse Zinc Zinc Interior Use Interior Use #8 x 1-3/4” #8 x 2” 1000 800 772214-A 772215-A Fine Coarse Coarse Coarse Coarse Coarse Coarse Coarse Coarse Coarse - - #6 x 1-1/4" #6 x 1-1/4" #6 x 1-5/8" #8 x 1-5/8" #8 x 1-3/4" #8 x 2" #8 x 2-1/2" #8 x 3" #8 x 1-3/4" #8 x 2" 1000pcs/box 1000pcs/box 1000pcs/box 1000pcs/box 1000pcs/box 800pcs/box 600pcs/box 600pcs/box 1000pcs/box 800pcs/box F-31018 F-31021 F-31034 F-31047 F-31050 F-31063 F-31076 F-31812 F-31089 F-31092 Drywall to Metal Drywall to Wood Drywall to Wood Wood to Wood Wood to Wood Wood to Wood Wood to Wood Wood to Wood Wood to Wood Wood to Wood SPECIFICATIONS Hex shank Screw capacity: No load speed AMPS (120 V) Overall length 6845 6845L Cord length Net weight Bits Model 6831 Phillips 6832 Phillips 6831 Phillips 6834 Square 6834 Phillips Qty. 5 1 1 1 1 Overall Length 4-5/8” (117 mm) 5-1/4” (133 mm) 4-5/8” (117 mm) 5-3/4” (145 mm) 5-3/4” (145mm) Size #2 #2 #2 #2 #2 Square 2-182 Square 2-162 Phillips 2-122 Square 2-182 Phillips 2-162 BFR750Z, BFR750L BFR550Z, BFR550L, BFR540Z, BFR540L 6845, 6845L 6844, 6844L 6842 Part # A-12697 784236-A 784233-2 784605-A 784238-2 784647-5 784645-9 784241-3 784647-5 784251-0 DRILLS 1/4” (6.3 mm) 1-3/4” to 2-15/16” (45mm to 75mm) 3000 RPM 4.3 METALWORKING SPECIFICATIONS Hex shank Screw capacity: No load speed AMPS (120 V) Overall length 6844 6844L Cord length Net weight Ergonomically designed handle with rubberized soft grip Tool-less screw depth adjustment for easy depth setting Silent clutch for reduced maintenance and quiet operation Adjustable stopper base can be set for different screw lengths Reverse switch operable by one hand Lock-on button for continuous operation Externally accessible carbon brush SAWS Variable Speed, Reversible WOODWORKING Variable Speed, Reversible BENCHTOP 1/4” Autofeed Screwdriver HAMMERS 1/4” Autofeed Screwdriver PNEUMATIC 6844 / 6844L 1/4” Autofeed Screwdriver NOTE: Fine / Coarse threads are screws with two types of thread on the same screw; Threads near the screw tip are coarse for quick and strong penetration and threads near the head (throat) are fine. This helps pull the piece of wood together www.makita.ca 77
