Download Pentax AF540FGZ User's Manual

00_AF540FGZ.book Page 36 Monday, April 10, 2006 11:42 AM
■Contrast Control Sync Flash
Procedure
Refer to page 32 for the features and conditions of use
of this sync mode.
● Refer to “Connecting the AF540FGZ with the
Extension Cord” on page 59 on using the
AF540FGZ detached from the camera.
36
1
2
3
Turn on the power switch.
Set the sync mode switch to contrast-control
(
).
Set the zoom position. (The setting method
differs according to your camera and lens. Refer
to page 21.)
● If the AF540FGZ is much closer to the subject
than the flash unit to be used in combination,
use (M.Zoom) to set the zoom position to a
shorter lens focal length.
4
Turn on the flash units to be used in combination.
● If the camera's built-in flash unit is part of the
combination, pop up the built-in flash.
5
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then take a
picture.