Transcript
Standby UPS Series DC UPS Series For VOIP and DC power emergency backup DC12V / DC24V Line Interactive UPS Series DC12V / DC24V * DC12V / DC24V High performance DC power protection for small electronic equipment Features On Line UPS Series Horizontal positioning or wall mount positioning Full time detection of utility power status Zero transfer time Wide AC input voltage windows (+/-25%) Line ok, back-up LED display Extra-Wide input voltage range (optional) Specifications Model Name OUTPUT Zero On/Off Green LED flashes every 3 seconds INPUT AC 110V/240V +/-25% at line input * (optional: 86V-276V at line input) Voltage (single phase) 50/60 s Fuse for overload UPS automatic 110V / 220V Sealed, maintenance-free protection occurs - batteries Backup time at full load scharge protection, Weight (Net/Gross) (kg) (lbs) 3.0 / 3.4 6.6 / 7.5 Inverter Series Number of sockets Surge Series Backup 10.5 x 6.1 x 2.5 / 14 x 7.7 x 2.9 267 x 155 x 64 / 356 x 195 x 73 Dimensions (Physical / Packing) (in) (L x W x H) (mm) Alarm - * See VS1000C on page 6 7. (No condensing water), 0-40oC Green Power Series DC12V / DC24V Networking Series Front Panel * * * * * * AVR Series * Exquisite design * Easy installation * Low battery alarm * Automatic shutdown * Cold start (DC power on) * Short circuit and overload protection