Download Olympus Stylus Verve Basic manual
Transcript
000e_kisohen.book Page 25 Friday, July 30, 2004 7:06 PM Taking still pictures Press the shutter button half-way. When the focus and exposure are locked, the green lamp lights steadily. When the flash is going to fire, the flash standby lamp lights. If the green lamp blinks, this means that the focus is not yet locked. Press the shutter button half-way again. En Press the shutter button all the way (fully) down to take the picture. Lamp The picture is stored on the card. The lamp on the camera blinks red while the picture is being stored on the card. Never open the card cover, or connect or disconnect the battery, AC adaptor or power coupler while the lamp on the camera is blinking. The picture just taken may not be stored and also the data of the pictures stored on the card may be lost. Memory gauge The memory gauge lights up when you take a picture. While the gauge is lit, the camera is storing the picture on the card. When the memory gauge is fully lit (as shown on right), no more pictures can be taken. Wait until the gauge turns off before taking the next picture. e P $ o HQ 2272*1704 11 d 11 Memory gauge Press the POWER switch to turn off the camera. 25
This document in other languages
- français: Olympus Stylus Verve
- español: Olympus Stylus Verve
- Deutsch: Olympus Stylus Verve
- русский: Olympus Stylus Verve
- italiano: Olympus Stylus Verve