Download New Holland 810TL User's Manual
Transcript
New Holland 800TL Series Front-End Loader Specifications Loaders for TN-A/TND-A, TNF/TNF-A & TNS-A Tractors LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) (A) (B) (C) (D) (E) (F) (G) (H) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) (A) (B) (C) (D) (E) (F) (G) (H) 810TL NSL TN-A/DA 60-75 2100 (953) 3300 (1497) 2400 (1089) 3750 (1701) 2650 (1202) 4200 (1905) 122 (3099) 110 (2794) 85 (2159) 30 (762) 65 86 (2184) 45 8 (203) 810TL MSL TN-A/DA 60-75 2500 (1134) 3200 (1451) 2950 (1338) 3650 (1656) 3200 (1451) 3850 (1746) 122 (3099) 110 (2794) 85 (2159) 30 (762) 64 86 (2184) 45 8 (203) 810TL NSL TNF/FA 65-95 2000 (907) 3200 (1451) 2350 (1066) 3600 (1633) 2550 (1157) 4050 (1837) 125 (3175) 113 (2870) 87 (2210) 38 (965) 61 85 (2159) 46 6 (152) 810TL MSL TNF/FA 65-95 2450 (1111) 3100 (1406) 2850 (1293) 3500 (1588) 3100 (1406) 3750 (1701) 125 (3175) 113 (2870) 87 (2210) 38 (965) 60 85 (2159) 46 6 (152) 3.3 2 3.5 2.4 960 (435) 3.3 2 2.4 2.4 1115 (506) 3.9 2.4 4.1 2.8 945 (429) 3.9 2.4 2.8 2.8 1095 (497) 820TL NSL TNS-A 75 2500 (1134) 3850 (1746) 2850 (1293) 4400 (1996) 3100 (1406) 4850 (2200) 135 (3429) 123 (3124) 97 (2464) 47 (1194) 57 92 (2337) 46 6 (152) 820TL MSL TNS-A 75 2650 (1202) 3300 (1497) 3100 (1406) 3750 (1701) 3300 (1497) 3950 (1792) 135 (3429) 123 (3124) 97 (2464) 47 (1194) 56 92 (2337) 46 6 (152) 820TL NSL TN-A/DA 85-95 2500 (1134) 3850 (1746) 2850 (1293) 4400 (1996) 3100 (1406) 4850 (2200) 133 (3378) 121 (3073) 96 (2438) 25 (635) 55 93 (2362) 50 7 (178) 820TL MSL TN-A/DA 85-95 2650 (1202) 3300 (1497) 3100 (1406) 3750 (1701) 3300 (1497) 3950 (1792) 133 (3378) 121 (3073) 96 (2438) 25 (635) 53 93 (2362) 50 7 (178) 4.1 3.6 4.1 3.6 2.8 2.2 2.8 2.2 3.5 2.4 3.5 2.4 ...............................................................................................2.4............................................................................................... 1040 (472) 1195 (542) 990 (449) 1150 (522) NSL = non self leveling MSL = mechanical self leveling (ss) = SuperSteer NOTES: Specification based on ASAE (S301.3) and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes. E D A B C G F H Page 1of 7 New Holland 800TL Series Front-End Loader Specifications Loaders for TDD & TL-A Tractors LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) 820TL 820TL 820TL 820TL NSL MSL NSL MSL TDD TDD TL-A TL-A 75-95 75-95 70-100 70-100 2500 (1134) 2650 (1202) 2500 (1134) 2650 (1202) 3850 (1746) 3300 (1497) 3850 (1746) 3300 (1497) 2850 (1293) 3100 (1406) 2850 (1293) 3100 (1406) 4400 (1996) 3750 (1701) 4400 (1996) 3750 (1701) 3100 (1406) 3300 (1497) 3100 (1406) 3300 (1497) 4850 (2200) 3950 (1792) 4850 (2200) 3950 (1792) (A)..........................................................................................136 (3454)..................................................................................... (B)..........................................................................................124 (3150)..................................................................................... (C)...........................................................................................98 (2489)...................................................................................... (D) 36 (914) 36 (914) 33 (838) 33 (838) (E) 58 57 57 56 (F) 88 (2235) 88 (2235) 90 (2286) 90 (2286) (G) 45 45 46 46 (H).............................................................................................5 (127)........................................................................................ 4.1 3.6 4.1 3.6 2.8 2.2 2.8 2.2 3.5 2.4 3.5 2.4 ...................................................................................................2.4 ........................................................................................... 990 (449) 1150 (522) 990 (449) 1150 (522) (A) (B) (C) (D) (E) (F) (G) (H) 830TL NSL TL-A 70-100 3200 (1451) 4850 (2200) 3650 (1656) 5500 (2495) 3850 (1746) 5950 (2699) 144 (3658) 132 (3353) 9106 (2692) 34 (864) 59 98 (2489) 46 7 (178) 830TL MSL TL-A 70-100 3400 (1542) 4200 (1905) 3850 (1746) 4750 (2155) 4200 (1905) 5050 (2291) 144 (3658) 132 (3353) 106 (2692) 34 (864) 58 98 (2489) 46 7 (178) 5.4 4.1 4.6 3.4 1135 (515) 4.7 3.4 3.4 3.4 1290 (585) NSL = non self leveling MSL = mechanical self leveling (ss) = SuperSteer NOTES: Specification based on ASAE (S301.3) and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes. E D A B C G F H Page 2 of 7 New Holland 800TL Series Front-End Loader Specifications Loaders for TS-A Tractors LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) (A) (B) (C) (D) (E) (F) (G) (H) 830TL NSL TS-A 100-110 3150 (1429) 4750 (2155) 3550 (1610) 5400 (2449) 3800 (1724) 5850 (2654) 145 (3683) 133 (3378) 107 (2718) 31 (787) 63 92 (2337) 43 8 (203) 830TL MSL TS-A 100-110 3350 (1520) 4100 (1860) 3800 (1724) 4650 (2109) 4100 (1860) 5000 (2268) 145 (3683) 133 (3378) 107 (2718) 31 (787) 62 92 (2337) 43 8 (203) 4.1 3 3.4 2.6 1135 (515) 3.6 2.5 2.6 2.6 1290 (585) 840TL 840TL 840TL 840TL NSL MSL NSL MSL TS-A TS-A TS-A (SS) TS-A (SS) 115-135 115-135 115-135 115-135 3700 (1678) 3950 (1792) 3700 (1678) 3950 (1792) 5350 (2427) 4650 (2109) 5350 (2427) 4650 (2109) 4200 (1905) 4400 (1996) 4200 (1905) 4400 (1996) 6050 (2744) 5250 (2381) 6050 (2744) 5250 (2381) 4400 (1996) 4750 (2155) 4400 (1996) 4750 (2155) 6500 (2948) 5600 (2540) 6500 (2948) 5600 (2540) (A)..........................................................................................154 (3912)..................................................................................... (B)..........................................................................................142 (3607)..................................................................................... (C) 116 (2946) 116 (2946) 123 (3124) 123 (3124) (D) 31 (787) 31 (787) 38 (965) 38 (965) (E) 57 56 57 56 (F) 100 (2540) 100 (2540) 102 (2591) 102 (2591) (G).................................................................................................45............................................................................................ (H).............................................................................................8 (203)........................................................................................ 3.8 3.4 3.8 3.4 3 2.5 3 2.5 2.9 2.1 2.9 2.1 ...................................................................................................2.1 ........................................................................................... 1220 (553) 1370 (621) 1220 (553) 1370 (621) NSL = non self leveling MSL = mechanical self leveling (ss) = SuperSteer NOTES: Specification based on ASAE (S301.3) and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes. E D A B C G F H Page 3 of 7 New Holland 800TL Series Front-End Loader Specifications Loaders for T6000 Tractors LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees digging depth, in. (mm) 830TL NSL T6000 4 CYL. 3700 (1678) 5350 (2427) 4200 (1905) 6050 (1741) 4400 (1995) 6500 (2948) 156 (3962) 144 (3657) 118 (2997) 38 (965) 57 102 (2590) 45 7 (177) 830TL MSL T6000 4 CYL. 3950 (1791) 4650 (2109) 4400 (1995) 5250 (2381) 4750 (2154) 5600 (2540) 156 (3962) 144 (3657) 118 (2997) 38 (965) 56 102 (2590) 44 7 (177) 840TL NSL T6000 4 CYL. SS ONLY 3460 (1569) 5000 (2267) 3920 (1778) 5650 (2562) 4110 (1864) 6070 (2753) 154 (3911) 142 (3606) 116 (2946) 31 (78) 57 100 (2540) 45 7 (177) 840TL MSL T6000 4 CYL. SS ONLY 3690 (1673) 4340 (1955) 4110 (1864) 4910 (2227) 4440 (2013) 5230 (2372) 154 (3911) 142 (3606) 116 (2946) 31 (78) 56 100 (2540) 45 8 (203) 840TL NSL T6000 6 CYL. 3700 (1678) 5350 (2426) 4200 (1905) 4910 (2227) 4440 (2013) 5230 (2372) 154 (3911) 142 (3606) 116 (2946) 31 (78) 56 100 (2540) 45 8 (203) 840TL MSL T6000 6 CYL. 3950 (1791) 4650 (2109) 4400 (1995) 5250 (2381) 4750 (2154) 5600 (2540) 154 (3911) 142 (3606) 116 (2946) 31 (78) 56 100 (2540) 45 8 (203) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) 3.5 2.7 2.6 2 1220 (553) 3.1 2.3 2 2 1370 (621) 5.4 4.2 4 3 1220 (553) 4.8 3.6 3 3 1370 (621) 5.4 4.2 4 3 1220 (553) 3.1 2.3 2 2 1370 (621) LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees digging depth, in. (mm) 850TL NSL T6000 6 CYL. 4300 (1950) 6050 (2744) 4750 (2154) 6750 (3061) 5000 (2267) 7200 (3265) 167 (4241) 155 (3937) 129 (3276) 34 (863) 53 109 (2768) 44 6 (152) 850TL MSL T6000 6 CYL. 4650 (2109) 5350 (2426) 5100 (2313) 5950 (2698) 5350 (2426) 6300 (2867) 167 (4241) 155 (3937) 129 (3276) 34 (863) 54 109 (2768) 44 6 (152) 4.9 4 3.4 2.7 1385 (628) 4.4 3.4 2.7 2.7 1570 (712) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) (A) (B) (C) (D) (E) (F) (G) (H) (A) (B) (C) (D) (E) (F) (G) (H) NSL = non self leveling MSL = mechanical self leveling (ss) = SuperSteer NOTES: Specification based on ASAE (S301.3) and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes. E D A B C G F H Page 4 of 7 New Holland 800TL Series Front-End Loader Specifications Loaders for TM & TG Tractors LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) 850TL 850TL 850TL 850TL NSL MSL NSL MSL TM TM TM (SS) TM (SS) 120-155 120-155 120-155 120-155 4300 (1950) 4650 (2109) 4300 (1950) 4650 (2109) 6050 (2744) 5350 (2427) 6050 (2744) 5350 (2427) 4750 (2155) 5100 (2313) 4750 (2155) 5100 (2313) 6750 (3062) 5950 (2699) 6750 (3062) 5950 (2699) 5000 (2268) 5350 (2427) 5000 (2268) 5350 (2427) 7200 (3266) 6300 (2858) 7200 (3266) 6300 (2858) (A)..........................................................................................167 (4242)..................................................................................... (B)..........................................................................................155 (3937)..................................................................................... (C) 129 (3277) 129 (3277) 136 (3454) 136 (3454) (D) 31 (787) 31 (787) 38 (965) 38 (965) (E) 56 55 56 55 (F) 107 (2718) 108 (2743) 108 (2743) 107 (2718) (G).................................................................................................43............................................................................................ (H).............................................................................................5 (127)........................................................................................ 4.6 4.1 4.6 4.1 3.7 3.2 3.7 3.2 3.2 2.5 3.2 2.5 ...................................................................................................2.5 ........................................................................................... 1385 (628) 1570 (712) 1385 (628) 1570 (712) (A) (B) (C) (D) (E) (F) (G) (H) 860TL MSL TM 175-190 4900 (2223) 5450 (2472) 5450 (2472) 6300 (2858) 5800 (2631) 6650 (3016) 176 (4470) 164 (4166) 138 (3505) 31 (787) 45 115 (2921) 45 7 (178) 870TL MSL TG 215-305 5250 (2381) 5950 (2699) 6500 (2948) 7550 (3425) 7000 (3175) 8150 (3697) 187 (4750) 175 (4445) 150 (3810) 35 (889) 57 109 (2769) 38 6 (152) 870TL MSL TG (SS) 215-305 5250 (2381) 5950 (2699) 6500 (2948) 7550 (3425) 7000 (3175) 8150 (3697) 187 (4750) 175 (4445) 150 (3810) 65 (1651) 58 109 (2769) 38 6 (152) 4.6 3.7 2.9 2.9 1675 (760) 3.4 2.7 1.8 1.8 1780 (807) 3.4 2.7 1.8 1.8 1780 (807) NSL = non self leveling MSL = mechanical self leveling (ss) = SuperSteer NOTES: Specification based on ASAE (S301.3) and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes. E D A B C G F H Page 5 of 7 New Holland 800TL Series Front-End Loader Specifications Loaders for T7000 Tractors LOADER MODEL Loader type, NSL or MSL TRACTOR FAMILY TRACTOR MODELS Lift capacity @ max. height @ 800 mm, lb. (kg) Lift capacity @ max. height @ pins, lb. (kg) Lift capacity @ 59 in. high @ 800 mm, lb. (kg) Lift capacity @ 59 in. high @ pins, lb. (kg) Breakout force @ 800 mm, lb. (kg) Breakout force @ pins, lb. (kg) Max. lift height, in. (mm) Max. lift height under level bucket, in. (mm) Clearance w/bucket dumped, in. (mm) Reach @ max. lift height, in. (mm) Max. dump angle, degrees Reach @ ground line, in. (mm) Bucket rollback angle, degrees Digging depth, in. (mm) Raising time, seconds Lowering time, seconds Bucket dump time, seconds Bucket rollback time, seconds Approx. weight, lb. (kg) (loader w/o bucket) (A) (B) (C) (D) (E) (F) (G) (H) 850TL NSL T7000 T7030 - T7040 4300 (1950) 6050 (2744) 4750 (2154) 6750 (3061) 5000 (2267) 7200 (3265) 169 (4292) 157 (3987) 131 (3327) 29 (436) 55 104 (2641) 41 4 (101) 850TL MSL T7000 T7030 - T7040 4650 (2109) 5350 (2426) 5100 (2313) 5950 (2698) 5350 (2426) 6300 (2857) 169 (4292) 157 (3987) 131 (3327) 29 (436) 56 104 (2641) 41 4 (101) 860TL MSL T7000 T7030 - T7060 4900 (2222) 5450 (2472) 5450 (2472) 6300 (2857) 5800 (2630) 6650 (3016) 178 (4521) 166 (4216) 140 (3556) 36 (914) 55 113 (2870) 43 6 (152) 3.5 2.6 2.4 1.9 1385 (628) 3.1 2.4 1.9 1.9 1570 (712) 4.6 3.7 2.9 2.9 1675 (759) NSL = non self leveling MSL = mechanical self leveling (ss) = SuperSteer NOTES: Specification based on ASAE (S301.3) and are subject to change without notice. Dimensional and performance specifications are based on typical tractors and tire sizes. E D A B C G F H Page 6 of 7 New Holland 800TL Series Front-End Loader Specifications Attachments for 800TL Series Loaders Standard material buckets, in. (mm) ..................................................................................................63 - 102 (1600 - 2591) .................................................................................. Heavy-duty material buckets, in. (mm)...............................................................................................73 - 102 (1854 - 2591) .................................................................................. Heavy-duty material bucket w/teeth, in. (mm).....................................................................................63 - 83 (1600 - 2108) ................................................................................... Standard high capacity material bucket, in. (mm) ..............................................................................79 - 102 (2007 - 2591) .................................................................................. High tipping bucket, in. (mm)........................................................................................................................91 (2311)............................................................................................. Heavy-duty grading bucket, in. (mm) ............................................................................................................85 (2159)............................................................................................. Manure fork, in. (mm)..........................................................................................................................59 - 90 (1499 - 2286) ................................................................................... Multi use fork, in. (mm)......................................................................................................................59 & 79 (1499 & 2007).................................................................................. Rock fork, in. (mm).............................................................................................................................59 & 79 (1499 & 2007).................................................................................. Pallet fork, in. (mm).............................................................................................................................38 & 47 (965 & 1194)................................................................................... Pallet fork attachments, in. (mm)............................................................................................................Log Grapple, Bale ..........................................................................................................................................................Spike & Lift Arm ....................................................................................... Heavy-duty Silage King bucket and grapple, in. (mm) ........................................................................63 - 79 (1600 - 2007) ................................................................................... HD Silage King fork and grapple, in. (mm)..........................................................................................51 - 98 (1295 - 2489) ................................................................................... HD silage block cutter and grapple, in. (mm) ......................................................................................44 - 75 (1118 - 1905) ................................................................................... Heavy-duty bale grip, in. (mm)...........................................................................................................63 & 79 (1600 & 2007).................................................................................. Universal bale grip, in. (mm) ..............................................................................................................51 & 63 (1295 & 1600).................................................................................. Combo bale/pallet fork, in. (mm)...................................................................................................................71 (1803)............................................................................................. Bale support for combo bale/pallet fork Heavy-duty round or square plastic wrapped bale grip, in. (mm) ................................................Bale size 23 - 80 (584 - 2032)............................................................................. Bale split attachment .....................................................................................................................................STD & HD ............................................................................................ Bale spike Round and large square bale fork....................................................................................................................2 Tines............................................................................................... Square bale fork, in. (mm)..................................................................................................................55 & 75 (1397 & 1905).................................................................................. Heavy-duty “Round Bale King” buckets with tines & grapple, in. (mm)........................................................................................................83 - 102 (2108 - 2591) .................................................................................. with tine holder, in. (mm)................................................................................................................83 - 102 (2108 - 2591) .................................................................................. with grapple and extended floor, in. (mm)......................................................................................83 - 102 (2108 - 2591) .................................................................................. less tine holders, in. (mm) ..............................................................................................................83 - 102 (2108 - 2591) .................................................................................. See your New Holland dealer for specific loader applications. Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377 Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may var y outside these areas. © 2007 CNH America LLC New Holland is a registered trademark of CNH America LLC. Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. Page 7 of 7