Download NEC Express5800/R120d-2E SR User's Guide

Transcript
Chapter 1 General Description
4.
4. Names and Functions of Parts
Names and Functions of Parts
This section describes the names of the server parts.
4.1 Front View
3.5-inch Hard Disk Drive Model (R120d-1E)
(3)-1
(3)-2
(3)-3
(3)-4
(4)
(6)
1
3
2
4
(7)
(5)
(1)
(2)
(1) Front Bezel
(5) STATUS LED (green/amber)
The cover to protect the front of the server. This cover can
This LED indicates the server status. It lights green when
be locked with the provided Bezel Lock Key.
the server is operating normally. If a failure is detected, it
turns on or flashes amber.
(2) Key slot
The key slot for Bezel Lock Key that is used to lock Front
(6) Unit ID (UID) LED (blue)
Bezel.
This LED turns on when the UID switch is pressed.
Commands from the software also cause it to turn on or
(3) LINK/ACT LED (green)
flash.
This LED turns on when the server is connected to the
network.
(7) POWER LED (green/amber)
Sequential numbers 1,2,3 and 4 indicate LAN connectors
This LED lights green when the power is ON.
1,2,3 and 4, respectively.
lights amber until the server becomes ready to power
This LED
on after the power cord is connected.
(4) Disk Access LED (green/amber)
This LED lights green when the internal hard disk drive is
being accessed.
An amber light turns on if a hard disk drive is broken, and a
light flashes green and amber alternately when a hard disk
drive is being rebuilt. (RAID System only)
Express5800/R120d-1E
User’s Guide
29