Transcript
Specifications DESCRIPTION • Metal construction with various finishes identified by suffix • For use with S936 3/4” thermostatic valve and S956 volume control with integral checkstops OPERATION • Flow lever operates counterclockwise through a 90˚ arc with off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise direction • Temperature lever operates through a 340˚ arc with maximum cold at full clockwise rotation and maximum hot at full counterclockwise rotation • Safety stop preset temperature at 105˚F ( 41˚ C) • Safety stop override allows maximum temperature at 120˚F (49˚C) • Factory established temperature range from 70˚F (21˚C) to 120˚F (49˚C) FLOW • Showerhead is limited to 2.5 gpm max. (9.5 L/min) CARTRIDGE • 130156 thermostatic cartridge design with non metallic/nonferrous materials • 130157 volume ceramic disc cartridge design STANDARDS • Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein including ASSE1016 • ADA Divine™ ExactTemp® 3/4" Thermostatic Tub/Shower Trim for lever handles WARRANTY Models: TS3510 series-valve trim only TS3512 series-shower trim only TS3516 series-tub/shower trim • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations Valves: S936 - thermostatic S956 - volume control 7-7/8" (200mm) 7-7/8" (200mm) 2-1/8" (54mm) WALL OPENING 4-3/4" (121mm) WALL OPENING 8" (203mm) Recommended 6" (152mm) MIN. 8" (203mm) Recommended 6" (152mm) MIN. 2-11/16" (68mm) 6-7/16" (164mm) 2-1/8" (54mm) WALL OPENING 4-3/4" (121mm) WALL OPENING 2-11/16" (68mm) 3-3/16" (81mm) 6-7/16" (164mm) SHOWER ONLY APPLICATION 6-15/16" (176mm) 5-1/16" (129mm) TUB/SHOWER APPLICATION M•pact™ System Valves Sold Separately TS3516sp: Rev. 11/07 CRITICAL DIMENSIONS (DO NOT SCALE) FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com