Transcript
Specifications DESCRIPTION • Metal construction with various finishes identified by suffix • For use with S936 3/4” thermostatic and S956 volume control valves with integral checkstops OPERATION • Flow lever operates counterclockwise through a 90˚ arc with off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise direction • Temperature lever operates through a 340˚ arc with maximum cold at full clockwise rotation and maximum hot at full counterclockwise rotation • Safety stop preset temperature at 105˚F ( 41˚C) • Safety stop override allows maximum temperature at 120˚F (49˚C) • Factory established temperature range from 70˚F (21˚C) to 120˚F (49˚C) FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 130156 thermostatic cartridge design with non metallic/nonferrous materials • 130157 volume ceramic disc cartridge design STANDARDS BAMBOO™ • Third party certified to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein including ASSE1016 • ADA ExactTemp® 3/4" Thermostatic Tub/ Shower Trim for lever handles WARRANTY Models: TS88110 series-valve trim only TS88112 series-shower trim only TS88116 series-tub/shower trim • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installation Valves: S936 - thermostatic S956 - volume control 10" (254mm) 18" (457mm) 10" (254mm) 18" (457mm) 6-1/8" (156mm) 6-1/8" (156mm) 8" (203mm) 6-1/2" (165mm) 10" (254mm) 2-1/4" (57mm) OPENING 2-11/16" (68mm) 5-1/4" (133mm) OPENING 8" (203mm) 6" (152mm) MIN 2-11/16" (68mm) 2-1/4" (57mm) OPENING 16" (406mm) 5-1/4" (133mm) OPENING 3" (76mm) 6-1/2" (165mm) SHOWER ONLY APPLICATION 8" (203mm) 6" (152mm) MIN 6-5/8" (168mm) TUB/SHOWER APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Valves Sold Separately TS88116sp: Rev. 11/07 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
