Download Minox DC 8122 User Guide

The table below will help you choose the appropriate flash mode:
Flash mode
Description
The flash fires automatically to suit the photographic conditions.
[ Blank] Automatic Flash
This mode is only available when the camera is set to the [ ], [P], [ ] and
[ ] mode.
Use this mode to reduce the red-eye phenomenon when you want to
capture natural- looking images of people and animals in low-light conditions.
[
] Red-eye Reduction When the camera mode is [
], [P] and [M], the flash will fire to suit the
brightness of the subject.
When the camera mode is [Tv] and [Av], the flash will always fire.
[
] Pre-Flash
[
] Flash Off
The “Pre-flash” mode allows you to brighten the subject prior to taken the
final picture and firing the flash.
Use this mode when capturing images using indoor lighting, for stages and
indoor competitions, and when the subject is too far away for the flash to be
effective.
[
] Forced Flash
In this mode, the flash always fires. Use this mode for photographing under
artificial light such as backlighting, fluorescent lighting, etc.
EN-36