Download LST BEAMMMK User's Manual

Beam Smoke Det. Accessories
BEAMLRK, BEAMMMK, BEAMSMK
• Suitable for Beam Smoke Detectors
Series 6500
• Three-part reflector set increases the
detection range to 100m
• Multi-mount kit with
three-dimensional angle adaptation
fig. A
fig. B
• Surface-mount kit
fig. C
Reflector BEAMLRK
The Reflector BEAMLRK (fig. A) increases the maxi- parts and the reflector included with the detector are
mum range of the Beam Smoke Detector Series 6500 put together, thus resulting in one large reflector.
to 100m. The package contains 3 parts. These three
Specifications
Material
Plastic
Dimensions W × H × D
200 × 230 × 10 (mm), one piece
Dimensions W × H
400 × 460 (mm), entire reflector area
Order number
244024
Order name
Reflector/6500/75-100M BEAMLRK
Multi-Mount Kit BEAMMMK
The Multi-Mount Kit BEAMMMK (fig. B) is used for atta- sloped. If the reflector is installed by means of the multiching the Beam Smoke Detector Series 6500 or the mount kit, the range is limited to 70m.
reflector under difficult conditions, e.g., if the ceiling is
Specifications
Order number
244025
Order name
Multi-Mount Kit/6500 BEAMMMK
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
A
BEAM-ZBH_DBL_LST_EN_0804.PDF • PAGE 1
Surface-Mount Kit BEAMSMK
The Surface-Mount Kit BEAMSMK (fig. C) is used Series 6500 or for the mounting of the detector in comfor surface mounting of the Beam Smoke Detector bination with the Multi-Mount Kit BEAMMMK.
Specifications
Material
Plastic
Dimensions W × H × D
178 × 230 × 51 (mm)
Order number
244026
Order name
Surface-Mount Kit/6500 BEAMSMK
Building Safety. Building Security.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
A
BEAM-ZBH_DBL_LST_EN_0804.PDF • PAGE 2