Download LST BEAMMMK User's Manual
Transcript
Beam Smoke Det. Accessories BEAMLRK, BEAMMMK, BEAMSMK • Suitable for Beam Smoke Detectors Series 6500 • Three-part reflector set increases the detection range to 100m • Multi-mount kit with three-dimensional angle adaptation fig. A fig. B • Surface-mount kit fig. C Reflector BEAMLRK The Reflector BEAMLRK (fig. A) increases the maxi- parts and the reflector included with the detector are mum range of the Beam Smoke Detector Series 6500 put together, thus resulting in one large reflector. to 100m. The package contains 3 parts. These three Specifications Material Plastic Dimensions W × H × D 200 × 230 × 10 (mm), one piece Dimensions W × H 400 × 460 (mm), entire reflector area Order number 244024 Order name Reflector/6500/75-100M BEAMLRK Multi-Mount Kit BEAMMMK The Multi-Mount Kit BEAMMMK (fig. B) is used for atta- sloped. If the reflector is installed by means of the multiching the Beam Smoke Detector Series 6500 or the mount kit, the range is limited to 70m. reflector under difficult conditions, e.g., if the ceiling is Specifications Order number 244025 Order name Multi-Mount Kit/6500 BEAMMMK Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 [email protected] • WWW.LST.AT • ALL RIGHTS RESERVED A BEAM-ZBH_DBL_LST_EN_0804.PDF • PAGE 1 Surface-Mount Kit BEAMSMK The Surface-Mount Kit BEAMSMK (fig. C) is used Series 6500 or for the mounting of the detector in comfor surface mounting of the Beam Smoke Detector bination with the Multi-Mount Kit BEAMMMK. Specifications Material Plastic Dimensions W × H × D 178 × 230 × 51 (mm) Order number 244026 Order name Surface-Mount Kit/6500 BEAMSMK Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 [email protected] • WWW.LST.AT • ALL RIGHTS RESERVED A BEAM-ZBH_DBL_LST_EN_0804.PDF • PAGE 2