Download Lightolier Wall Washer/Indirect Wall Mount BI-LYTER User's Manual
Transcript
WALL WASHER/INDIRECT WALL MOUNT Page 1 of 2 BI-LYTER SURFACE FLUORESCENT 2' LENGTH, 1 LAMP TT5 4' LENGTH, 2 LAMP TT5 OR 1 LAMP T8 FEATURES • Same fixture can be used as a wall washer when ceiling mounted, or for indirect lighting when wall mounted. • When wall mounted, ideal for indirect lighting small offices or corridors. • When ceiling mounted, ideal for lighting chalk boards, bulletin boards, wall displays or any vertical surface. • Only 4" deep. • Meets ADA when wall mounted. • Soft rounded corners and edges create an elegant appearance. • 20 gauge cold rolled steel body. • Die-cast aluminum end caps. • Specular reflector. • 4' unit 2-TT5 or 1 T8 lamp. • 2' unit TT5 lamp. • Off white baked acrylic finish (standard). • Can be used in continuous rows. • Meets NYC Code Requirements. Wall Washer MOUNTING METHODS Indirect Wall Mount DIMENSIONS Ceiling 2' Unit 4" (102mm) 1/2" (13mm) 9/32" Mounting Hole 15/16" (24mm) 7/8" Dia. K.O. 4-3/8" (111mm) CL 18-3/8" (467mm) 24-3/8" (619mm) 25-7/8" (657mm) 4-3/8" (111mm) Wall Washer 4' Unit 1/2" (13mm) W a l l 4-3/8" (111mm) 9/32" Mounting Hole 21-11/16" (551mm) 7/8" Dia. K.O. 15/16" (24mm) 4-3/8" (111mm) CL 43-3/8" 1102mm) 48-11/16" 1237mm) 50-3/16" (1275mm) 4" (102mm) Indirect Wall Mount 1" (25mm) W a l l Job Information Type: Job Name: 4-3/8" (111mm) Cat. No.: Lamp(s): Volts/Ballast: 4" (102mm) Indirect Wall Mount with Optional BL-Spacer (Does not meet ADA) Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 Section 5/Folio K10-31 WALL WASHER/INDIRECT WALL MOUNT Page 2 of 2 BI-LYTER SURFACE FLUORESCENT 2' LENGTH, 1 LAMP TT5 4' LENGTH, 2 LAMP TT5 OR 1 LAMP T8 PHOTOMETRY Maintained footcandle readings on wall with 40 watt lamp (BLSW124120SB). Footcandles on feetfrom from wall to outside of fixture. Footcandles onWall: WallFixtures Fixtures: 3 feet wall to outside trim onedge lamp side of fixture. IndividualWal-Lyter Bi-Lyter Individual 0' 1' 2' 3' 4' 5' 6' 7' 8' 90° Ceiling 8' 7' 6' 5' 4' 3' 2' 1' Floor 75° 400 60° 800 45° 4 86 4 70 47 4 30 4 17 3 39 36 24 5 72 5 60 42 5 27 5 15 4 39 36 34 6 46 6 40 31 6 22 6 13 5 48 35 34 9 25 9 24 20 9 16 7 10 6 57 45 34 14 14 14 14 13 13 10 10 8 6 4 3 259 249 209 167 106 75 54 43 466 406 316 226 135 84 53 43 725 605 425 275 154 39 36 34 Multiple Units 6' 4' 864 704 474 304 173 93 63 42 100 83 59 40 24 15 10 8 98 84 63 43 26 16 10 8 92 81 63 43 26 16 11 8 98 100 84 83 63 59 43 40 26 24 16 15 10 10 8 8 93 76 53 35 21 13 9 7 82 69 51 35 21 14 9 7 60 54 44 32 21 14 9 7 50 47 41 31 21 14 9 7 Continuous Row 2' 3' 4' 5' 6' 7' 8' 0' 1' 60 54 44 32 21 14 9 7 82 69 51 35 21 14 9 7 93 76 53 35 21 13 9 7 157 134 101 71 45 30 21 17 184 158 118 82 51 33 23 17 199 204 170 176 128 134 89 93 55 57 35 36 24 25 18 18 207 178 135 94 58 36 25 19 204 176 134 93 57 36 25 18 199 170 128 89 55 35 24 18 184 158 118 82 51 33 23 17 157 134 101 71 45 30 21 17 1200 15° 30° 0° Wallwasher (Ceiling mounted) 180° 165° 150° Small Office Application 1050 Only four Bi-Lyters with 55 watt lamps are required to illuminate a 12' x 12' (80/80/50) office space to 50 maintained footcandles with only 1.68 watts per square foot (BLSW126120SB). 135° 700 Luminaire mounted 18" from ceiling 12' x 12' Office Space / 9' Ceiling Height Reflectance: 80% Ceiling, 80% Wall, 50% Floor. 120° Reported numbers are maintained footcandles at desk top level with 55 watt lamp. Footcandle readings will vary depending on room reflectance. 350 105° 90° 51 50 50 50 51 53 53 52 53 53 54 54 53 54 54 53 53 52 53 53 51 50 50 50 51 1.68 Watts Per Square Foot Indirect (Wall mounted) 17 17 17 18 18 18 17 Corridor Application Corridor maintained footcandle readings at floor level with 40 watt lamp (BLSW124120SB). 17 18 18 18 19 19 18 18 18 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 20 20 20 19 19 19 19 19 19 20 19 19 19 19 19 19 20 20 19 19 19 19 19 20 20 19 19 19 19 19 20 20 20 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 18 18 18 19 19 18 18 18 17 18 18 18 18 18 17 17 ORDERING INFORMATION Explanation of Catalog Number. Example: BLSW126120SBGLR BL W S BI-LYTER: Wall Washer/ Indirect Wall Mount SURFACE: S=Ceiling or Wall Mount EXTERIOR FINISH: W=Off White (egg-shell standard) F=Flat White LAMPS*: (2' Unit) 1-TT5 (4' Unit) 2-TT5 or 1-T8 *For linear T5 consult factory. LENGTH: 2=24" 4=48" WATTS: 1=18 watts 2=24 watts 4=40 watts 6=55 watts (4' unit only) 3=32 watts (T8) VOLTAGE: 120 or 277 BALLAST/LAMP: SB=Electronic (TT5) SO=Electronic (T8) (4' unit only) OPTIONS: Add appropriate suffix to catalog no., ie: (GLR) OPTIONS & ACCESSORIES SPECIFICATIONS (continued) FUSING: Internal fast-blow fusing. SUFFIX: GLR. Internal slow-blow fusing. SUFFIX: GMF. RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per fixture is standard. SUFFIX: RF. ELECTRICAL/WIRING OPTIONS: Consult factory. CONTINUOUS ROW: Order Catalog Number: BL COUPLER. T-GRID MOUNTING: Order Catalog Number: BL MOUNT. WALL MOUNT SPACER: Order Catalog Number: BL SPACER. (Does not meet ADA). END CAPS: Die-cast aluminum. FINISH: Chassis exterior—off white (egg-shell standard) baked acrylic. REFLECTOR—specular low-iridescence pre-anodized reflector sheet. ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°. LABELS: I.B.E.W. UL and ULc Listed. SPECIFICATIONS: MATERIALS: Chassis parts are die-formed 20 gauge cold rolled steel. Reflector—pre-anodized aluminum (Coilzak® or equal). Job Information Type: Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 Section 5/Folio K10-31