Transcript
Spectral Architectural Lighting Page 1 of 1 SL203A Fluted Disk Fluted Forms 1-22W/40W T5 Circular 3 1/2" (89 mm) 18 1/4" (464mm) Ordering Guide (complete unit only) Cat. No. Lamp (circular) Volt Finish SL203APZU 1-22W / 1-40W CT5 120/277V Anodized Aluminum & Sand Blasted Glass Features 1. Form: Round form fabricated from slitted corrugated anodized aluminum. Slits hold the sand blasted glass and reflector element. The illuminated edge of the glass is visible through the corrugations. 2. Glass: Center sand blasted glass with clear outer ring. Image of lamps seen through the glass to create a geometric pattern on the wall or ceiling. 3. Housing: Spun painted steel construction. Mounting plate houses the ballast and lamp sockets. Mounting Mounting: Surface mounting to wall or ceiling surfaces. Lamp Change: Fluted housing simply twists-off. Held in place by 3 locking pins. Options and Accessories Double Switching: Consult your Lightolier representative for more information. Perforated Form: Consult your Lightolier representative for more information. Dimming Ballast: Consult your Lightolier representative for more information. Finish Anodized corrugated aluminum sheet with precise flutes. All painted parts are with powder coat paint process. Labels UL “c/us” Listed. Suitable for damp locations. Luminaire Weight: 10.5 lbs. Electrical Ballast: Electronic Program Rapid Start T5 circular lamps ballast. Universal voltage “U” ballast automatically detect 120 volts or 277 volts operation. Ballast use cathode heater shut-off to increase T5 round lamp life. Lampholder: 2GX13 base, 4 Pin. Job Information Type: Job Name: Cat. No.: Lamp(s): Notes: Lightolier a Genlyte company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2005 Genlyte Group LLC • B0605