Download Lightolier PPH2G12FW232 User's Manual
Transcript
Paraplus II PPH2G12FW232 or 332 Direct/Indirect 2' x 4' Recessed Fluorescent 12 Cell White Louver With Lens Overlay, 2 or 3 Lamp T8 Page 1 of 2 Features • • • • • • • • • • • • • • • • • Direct/indirect louver appearance with soft contoured interior. 12 cell flat white louver with lens overlay. Air return models meet UL 1598, Paragraph 9.2.2.5 requirements. 72.1% efficient (2 lamp T8). 67.8% efficient (3 lamp T8). Only 5" deep. Tension bars secure ends to body. Same fixture fits both G and T ceiling types. Fits flush to face of slot grid (T) ceiling. Static, optional. Louver hinges from either side. End of louver gasketed to eliminate light leak. Built-in earthquake clips. Can be continuous row mounted. Wiring access plate standard. Meets NYC Code requirements. Construction to meet Chicago Plenum requirement is available. Mounting Methods Dimensions Exposed T-bar by others 5" (127mm) Exposed T-bar by others 1-1/2" max. 1-7/8" max. Acoustical material by others Acoustical material by others 15/16" 24" 24" (610mm) 9/16" 24" exposed t-grid ceiling exposed slot t-grid ceiling 2-1/2" (64mm) 2" x 2-1/2" Access Plate with (2) 7/8" dia. K.O. built-in earthquake clips 48" (1219mm) louver hinges from either side Job Information Type: Job Name: Cat. No.: air return flow Lamp(s): Volts/Ballast: 05/08 For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 a Philips Group Section 5/Folio M10-42 Lightolier is a Philips group brand Paraplus II PPH2G12FW232 or 332 Direct/Indirect 2' x 4' Recessed Fluorescent 12 Cell White Louver With Lens Overlay, 2 or 3 Lamp T8 Page 2 of 2 Model No. PPH2G12FW232120SO Model No. PPH2G12FW332120O3 LER = FP - 64.8 IW - 57.0 BF - 0.87 Comparative yearly lighting energy cost per 1000 lumens = $3.70 LER = FP - 63.2 IW - 85.0 BF - 0.88 Comparative yearly lighting energy cost per 1000 lumens = $3.79 CANDELA DISTRIBUTION0 Report Number: ITL51763 Catalog Number: PPH2G12FW232120SO Lamps: F32T8/SPX35 Luminaire: Paraplus with white painted interior, white painted 12 cell parabolic louver with prismatic overlay. Ballast: Howard Industries E2/32IS-120SC Report is based on 2950 Lumens per lamp. Efficiency: 72.1% CIE Type-Direct-Indirect Plane: 0-Deg 90-Deg Spacing Criteria: 1.2 1.2 Shielding Angles: 90 90 Plane: 0-Deg 90-Deg Luminous Length: 46.920 22.920 COEFFICIENTS OF UTILIZATION – ZONAL CAVITY METHOD. EFFECTIVE FLOOR CAVITY REFLECTANCE 0.200 RC 80 50 30 RW 70 50 30 50 30 10 50 30 01 79 76 74 72 70 68 69 67 02 73 67 63 64 60 57 61 58 03 67 60 55 57 52 49 55 51 04 62 54 48 51 46 42 49 45 05 57 48 42 46 41 37 45 40 06 52 44 38 42 37 33 41 36 07 49 40 34 38 33 29 37 33 08 46 37 31 35 30 26 34 30 09 43 34 28 32 27 24 32 27 10 40 31 26 30 25 22 29 25 0.0 45.0 90.0 0 1814 1814 1814 FLUX 5 1804 1806 1805 172 15 1718 1739 1758 492 25 1581 1615 1677 748 35 1368 1393 1323 860 45 1045 1070 1051 796 55 637 598 603 562 65 392 392 379 391 75 205 166 139 191 85 43 38 37 45 90 0 0 0 Report Number: ITL51761 Catalog Number: PPH2G12FW332120O3 Lamps: F32T8/SPX35 Luminaire: Paraplus with white painted interior, white painted 12 cell parabolic louver with prismatic overlay. Ballast: Howard Industries E3/32IS-120SC Report is based on 2950 Lumens per lamp. Efficiency: 67.8% CIE Type-Direct-Indirect Plane: 0-Deg 90-Deg Spacing Criteria: 1.2 1.3 Shielding Angles: 90 90 Plane: 0-Deg 90-Deg Luminous Length: 46.920 22.920 ZONAL LUMEN SUMMARY ZONE 00-030 00-040 00-060 00-090 90-180 00-180 10 66 56 48 42 37 33 29 26 24 22 LUMENS % LAMP 1412 23.9 2272 38.5 3630 61.5 4256 72.1 0000 0.0 4256 72.1 CANDELA DISTRIBUTION0 % FIXT 33.2 53.4 85.3 100.0 000.0 100.0 LUMINANCE DATA IN CANDELA/SQ. METER AVERAGE AVERAGE AVERAGE AVERAGE IN DEG. 0-DEG. 45-DEG. 90-DEG. 45 2113. 2163. 2125. 55 1588. 1465. 1503. 65 1326. 1326. 1282. 75 01132. 917. 768. 85 0705. 623. 607. COEFFICIENTS OF UTILIZATION – ZONAL CAVITY METHOD. EFFECTIVE FLOOR CAVITY REFLECTANCE 0.20 0 RC 80 50 30 RW 70 50 30 50 30 10 50 30 01 75 72 69 67 65 64 65 63 02 69 64 59 60 57 54 58 55 03 63 56 51 53 49 46 52 48 04 58 51 45 48 44 40 46 43 05 54 45 40 43 39 35 42 38 06 50 41 35 39 35 31 38 34 07 49 38 32 35 31 28 35 31 08 43 34 29 33 28 25 32 28 09 40 32 26 30 26 22 30 25 10 38 29 24 28 24 20 28 22 0.0 45.0 90.0 0 2468 2468 2468 FLUX 5 2457 2460 2459 15 2337 2380 2430 234 675 25 2166 2261 2406 1049 35 1891 2039 2069 1256 45 1464 1576 1530 1165 55 884 828 840 787 65 543 520 498 524 75 285 224 184 253 85 59 50 18 59 90 0 0 0 ZONAL LUMEN SUMMARY ZONE 00-030 00-040 00-060 00-090 90-180 00-180 10 62 53 46 39 35 31 27 25 22 20 LUMENS % LAMP 1958 22.1 3214 36.3 5166 58.4 6002 67.8 0000 00.0 6002 57.8 % FIXT 32.6 53.5 86.1 100.0 000.0 100.0 LUMINANCE DATA IN CANDELA/SQ. METER AVERAGE AVERAGE AVERAGE AVERAGE IN DEG. 0-DEG. 45-DEG. 90-DEG. 45 2960. 3186. 3093. 55 2203. 2064. 2093. 65 1837. 1759. 1684. 75 1574. 1237. 1006. 85 968. 820. 787. Ordering Information Explanation of Catalog Number. Example: PPH2G12FW332120O3 Paraplus II Body Style: H = Air Return S = Static 2 G 12 Fixture Width Ceiling Type: Fits both Standard Grid and Slot Grid Number of Cells: 12 =2 rows of 6 cells PP Standard Paraplus II PY For NYC Code – I.B.E.W. Manufactured P3 For NYC Code – Local 3 Manufactured F - 32 Lens Flat White Overlay: Louver and Body M = Matte White Acrylic .040 Thick W = Pattern 20 Prismatic .140 Thick O = K20 with White Overlay V = .095 Pattern 12 Lamp Quantity 2=2 Lamp 3=3 Lamp Lamp: (By Others) 32=T8 (Nominal 48") Voltage: 120, 277 or UNV=120-277 Options: Add appropriate suffix to catalog no., ie: (GLR) Ballast Type: < 20THD < 10THD 1 or 2 Lamp Elec. T8 SO * HI * 1-3 Lamp Elec. T8 O3 *H3 * – LOL Dimming T8 PS* *Instant Start Standard Other dimming options. Consult factory. NOTE: For T8 UNV, you must use HI, H3 Ballast Code. Options/Accessories Specifications (continued) Fusing: Internal fast blow fusing: SUFFIX: GLR. Internal slow blow fusing: SUFFIX: GMF. Drywall Kit: Order Catalog Number: FK92X4 and CF4FK SPACER. Electrical Wiring Options: Consult factory. Chicago Plenum: SUFFIX C. Overlay: M=Matte white acrylic .040 thick. W=Pattern 20 prismatic .140 thick. O=K20 with white overlay. V=.095 acrylic pattern 12. Electrical: Thermally protected class “P’ ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°. UL Listed for damp locations. Labels: I.B.E.W./UL and ULc Listed. This product may have a mercury containing lamp. Manage in accord with Disposal Laws. See: www.lamprecycle.org Specifications Performance: In an installation of 3 lamp 32W luminaires in a room cavity ratio of 1, with reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .72. To reduce glare the average brightness at 65° shall not exceed 1837 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 67.4%. Materials: Chassis parts are die-formed code gauge steel. Housing has all edges turned for safe-handling. Finish: Chassis exterior – baked white post painted acrylic enamel. Cavity – baked white post painted acrylic enamel. Louver – baked white post painted acrylic enamel, minimum 86% reflectance. Phosphate undercoating. Lightolier is a Philips group brand Job Information Type: For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 a Philips Group Section 5/Folio M10-42