Transcript
Specifications & Capacities Rear Blades RBT40 Series Blade Width Approximate Weight (lbs.) w/manual links Maximum Engine Horsepower Maximum G.V.W. (lbs.) Parking Stand Options 689# 739# 789# 100 HP - 2 Wheel drive 7 positions in 15 deg. increments (1 center, 3 clockwise & 3 counterclockwise) Up to 45 degrees in either direction. 3 1/2” X 16” X 1 1/4” (Manual or Hydraulic) Tilt Cylinder Main Frame 108” 3” Manual: Hydraulic: Angle Cylinder Cutting Edge 96” 5/16” reinforced, 1/4” tapered reinforcement channel MoldBoard Kingpin Offset Cylinder 84” 17” Moldboard Thickness Frame Offset RBT40108 Cat. 1 & 2 Fits Land Pride Quick Hitch Moldboard Height Tilt Angle RBT4096 9500 Hitch Type Blade Angle RBT4084 Up to 15 degrees 3” X 6” X 1 1/4” (Manual or Hydraulic) Up to 30 inches left and right 3 1/2” X 16” X 1 1/4” 1/2” x 6” Heat treated reversible blade Fully enclosed welded, formed box Retractable Skid Shoes End Plates Double Selector Valve and Cushion Valve 26810 Top View Designs, specifications, features and information are subject to change without notice. 68 Side View 301-206S 2/16/09
