Download Kompernass TOUCH IT KH 4112 User's Manual
Transcript
CV_KH4112_14_33345_LB6.qxd 10.06.2009 14:32 Uhr Seite 1 6 “TOUCH IT” TABLE LAMP KH 4112 “TOUCH IT” TABLE LAMP Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: KH4112_14-05/09-V2 KH 4113 KH 4114 CV_KH4112_14_33345_LB6.qxd 10.06.2009 14:32 Uhr Seite 5 KH4113 KH4112 KH4114 y q q w w w e q e r e r t t r t IB_KH4112_14_33345_LB6 10.06.2009 14:42 Uhr “TOUCH IT” TABLE LAMP KH 4112/13/14 Seite 1 • Clean the table lamp only after you have first withdrawn the plug from the wall power socket. Otherwise, there is the great risk of receiving an electric shock! • Lay the power cable in such a way that no one can tread on or trip over it. • This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. • Children should be supervised to ensure that they do not play with the appliance.. Read these operating instructions carefully before using the appliance for the first time and preserve this maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date. 1. Safety instructions Danger: Should moisture/water permeate into the table lamp, … • there is the danger of receiving an electric shock! • it may be irreparably damaged! Beware of appliance damage! • The table lamp can be irreparably damaged if it tips over or falls down! For this reason, always place the table lamp on a solid, level, slip-proof surface. • Use only light bulbs that match the specifications detailed in these operating instructions. • Do not use an extension cable. The appliance plug must be easily accessible in the event of an emergency. Thus: Do not use or store the table lamp … • in a humid environment! • in close proximity to water! Additionally, never subject the table lamp to spray water or rain. NEVER place receptacles filled with water or other fluids, for example flower vases, on the table lamp! Risk of fire! The table lamp and the bulb will become hot when it is in use! Risk of Burns! Hot surfaces. NEVER touch the lamp shade when the appliance is in use. Thus: • Do not cover the table lamp while it is switched on. Also, do not hang any objects over the table lamp. • Do not place any easily inflammable/combustible materials in the immediate vicinity of the table lamp while it is switched on. Risk of personal injury! • Remove the table lamp plug from the wall power socket before changing the bulb. If the table lamp was previously switched on: allow the table lamp, and the bulb that is to be replaced, to first cool down for at least half an hour. • Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. -1- IB_KH4112_14_33345_LB6 10.06.2009 14:42 Uhr Seite 2 6. Select a suitable installation site Note: For damage resulting from … • opening of the table lamp base / the transformer housing • attempted repairs made by non-qualified personnel • improper use of the table lamp Always place the table lamp on a solid, level, slipproof surface. To avoid malfunctioning, do not place the table lamp on metallic surfaces. no liability/warranty is accepted! Do not place any easily inflammable/combustible materials in the immediate vicinity of the table lamp while it is switched on. Do not cover the table lamp while it is switched on. Also, do not hang any objects over the table lamp. Do not place the table lamp on metallic objects. 2. Proper Use The table lamp is intended exclusively … Otherwise there is a risk of a short-circuit or fire! • as an illumination and decorative object for interior rooms (no damp rooms) • for domestic, non-commercial use. 7. Preparing the table lamp for use 3. Items supplied Table lamp Operating instructions 1. Carefully remove the table lamp from the packaging. 2. KH 4112/KH 4114: Screw the light bulb 1 (not supplied) into the bulb holder 3. 3. KH 4113: Carefully remove the lampshade 2 upwards from the table lamp. Loosen the covering cap 6 from the table lamp. Screw the bulb 1 (not supplied) into the bulb socket 3. Replace the lampshade 2 back onto the table lamp. Secure it with the help of the covering cap 6. 4. Unwind the power cable 5 to its full length. Insert the power cable 5 into a power plug. 4. Technical data Power supply: Power consumption : Bulb: Protection class: 230-240 V ~ 50Hz 40 W 40W 230V E14 II 5. Controls The table lamp is now ready for use. 1 Bulb (not supplied) 2 Lamp shade 3 Socket 4 Base with touch sensor as on/off switch and dimmer 5 Power cable 6 Covering cap (KH4113 only) 8. Using the table lamp • Switch the table lamp on by touching the base 4 with a finger (KH4113: touch the base 4 or the stand).The table lamp now lights up at the lowest brightness level. -2- IB_KH4112_14_33345_LB6 10.06.2009 14:42 Uhr Seite 3 10. Cleaning the table lamp • To switch it to the second brightness level: touch the base 4 a second time. • To switch it on to the third brightness level: Touch the base 4 once again. • To switch the table lamp off: touch the base 4 once again. Before cleaning the table lamp, always remove its power cable from the power socket. Clean the table lamp exclusively with a slightly damp cloth. Ensure that no moisture can permeate into the lamp! If you do not wish to use the table lamp for an extended period of time: Remove the power cable 5 from the power socket. To avoid damage, be careful not to kink the power 5 cable. Otherwise, there is the great risk of receiving an electric shock! 11. Troubleshooting 9. Changing the light bulb Problem The table lamp does not function. Should the bulb 1 in the table lamp be defect, it must be exchanged for a new one. Additionally: Possible causes / solutions • Check to ensure that the power cable 5 is inserted into a power socket. • Check to see if the light bulb 1 of the table lamp needs to be replaced. To do this, follow the steps described in section 9. "Changing the light bulb". • Check to see if the power socket where the power cord 5 is plugged in is "live". To do this, connect another electrical device to the power socket. • Check to see if the fuse or circuit breaker for the electrical circuit to which the table lamp is connected has been broken/triggered. • Remove the power cable 5 of the table lamp from the power socket. If the table lamp was previously switched on: Allow the lamp shade 2 and the light bulb 1 at least a half-hour to cool down before you continue. The risk of burns is ever present! • KH 4112/KH 4114: Screw the light bulb 1 out of the bulb holder 3 in an anti-clockwise direction. • KH 4113: Loosen the covering cap 6. Carefully remove the lampshade 2 upwards from the table lamp. Then screw the old light bulb 1 out of the bulb holder 3. • Screw a new light bulb 1 into the bulb holder 3. Use exclusively light bulbs of the type E14, 40 W. • KH 4113: Replace the lampshade 2 onto the table lamp. Secure it with the help of the covering cap 6. • Insert the power cable 5 into a power socket. The table lamp is once again ready for use. Other defects Contact one of our service partners in your area if … • the listed functional defects cannot be corrected as described or • other functional defects arise. -3- IB_KH4112_14_33345_LB6 10.06.2009 14:42 Uhr 12. Disposal Seite 4 DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: [email protected] Do not dispose of the appliance in your normal domestic waste. This product is subject to the European directive 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Dispose of all packaging materials in an environmentally friendly manner. Kompernass Service Ireland Tel: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: [email protected] 13. Warranty & Service 14. Importer The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www.kompernass.com -4-