Download JVC Serial No. User's Manual

TUNER
AREA
Tuner channel
interval
MONO *3
Monaural mode
AUDIO
MENU
COLOR
COLOR
IF BAND
Intermediate
frequency band
COLOR 01
– COLOR 29,
USER
MENU COLOR
Menu color
FADER*4, *5
Fader
BALANCE *5
Balance
LOUD
Loudness
Selectable settings, [reference page]
• AREA US
: When using in North/Central/South America. AM/FM
intervals are set to 10 kHz/200 kHz.
• AREA EU
: When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz (100 kHz during auto search).
• AREA SA
: When using in South American countries where FM interval
is 100 kHz. AM interval is set to 10 kHz.
• MONO ON
: Activate monaural mode to improve FM reception, but
stereo effect will be lost, [8].
• MONO OFF
: Restore the stereo effect.
• AUTO
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• WIDE
: Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
: Select one of the preset or user color for display and button (except EQ/
/0) illumination.
(For customize color settings, “USER,” see page 17.)
• OFF
: Cancels.
• ON
: Changes the display and button (except EQ/
/0)
illumination during menu, list search and playback mode
operations.
R06 – F06
: Adjust the front and rear speaker output balance.
(Initial: 00)
L06 – R06
: Adjust the left and right speaker output balance.
(Initial: 00)
• LOUD OFF
: Cancels.
• LOUD ON
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
ENGLISH
Category Menu items
*3 Displayed only when the source is “FM.”
*4 If you are using a two-speaker system, set the fader level to “00.”
*5 This adjustment will not affect the subwoofer output.
Continued on the next page
SETTINGS
EN10-15_KD-R400[J]_f.indd 15
15
9/10/08 3:24:02 PM