Download JVC KS-AX5102 Specification Sheet
Transcript
drvn AX3205D Amplifiers Amplifiers KS-AX3205D 5-Channel Class D Power Amplifier Sound Dynamics Design 1000W Max. 5-Channel Variable Bass Boost Compact Design High Input Class-D Key Benefits The 5-ch amplifier is a digital 4-ch amp and a mono amp in one, a highly versatile unit with a High Input terminal for various setup. The compact size is 10% smaller than JVC’s other amplifiers, allowing easy installation for a new system or an addition to upgrade your existing one. The input mode can be switched between 5ch/4ch on the unit. ✹Compact 5-channel mode Amplifier This versatile digital 5-channel amp, which offers the characteristics of both a 4-channel amp and a mono amp, can accommodate a variety of systems. In addition to being a core unit in a newly configured system, this amp has high input capacity together with switchable 4ch and 5ch modes, so that it can be easily incorporated into existing car audio systems. What’s more, its compact body size has been reduced by 10% compared to previous JVC amps to enable flexible installation in a variety of locations. Input Mode 5ch 4ch Mono Class-D Amplifier 4-ch Class-D Amplifier KS-AX3205D ✹High Input Terminal JVC amplifiers are equipped with high input terminals, making it easy to integrate the amp into a car’s factory-installed audio system with existing headunit and speakers, without having to implement a major rewiring of the system to enjoy upgraded sound. Mono Amplifier High-Input Connector Included 4-ch Amplifier drvn AX3205D Amplifiers ✹Variable Bass Boost Control You can control your subwoofer’s bass boost level (45Hz/0dB – -18dB) for a customized sound. ✹Input Sensitivity (5V – 0.2V) Input sensitivity has been improved over previous models, with the new 0.2V setting enabling an increased sense of volume. 45Hz (0 – -18dB) Amplifier Input Mode 5-Channel Mode System 5ch 3 Pre-Outputs CS-V628 CS-V6948 CS-V628 CS-V6948 Amplifier Input Mode 4-Channel Mode System 4ch 5ch 2 Pre-Outputs CS-V628 CS-V6948 CS-GD1210 400W(RMS) 44Ω+4Ω Parallel (2 (2Ω) Heatsink Dimensions (W x H x D) Weight [4CH PART] 4, 3, or 2 / [MONO PART] 1 1000W [4CH PART] 130W RMS × 2 [4CH PART] 50W RMS × 4 / [MONO PART] 200W RMS × 1 [4CH PART] 65W RMS × 4 / [MONO PART] 300W RMS × 1 Class-D [4CH PART] 5 - 30,000Hz / [MONO PART] 20 - 200Hz [4CH PART]< 0.04% @ 4Ω, 1,000Hz [MONO PART]< 0.08% @ 4Ω, 100Hz 2V/21kΩ [4CH PART] 50 - 200Hz, -12dB/oct (Variable) [MONO PART] 50 - 200Hz, -18dB/oct (Variable) ✔ [MONO PART] ✔ [MONO PART] 45Hz, 0 - 18dB ✔ Power On (GREEN)/Protector (OFF) 13 7/16” × 2 1/8” × 7 5/16” (340 × 53.5 × 185 mm) 11 13/16” × 2 1/16” × 7 5/16” (300 × 52 × 185 mm) 2.9kg (6.4 lbs.) 12-5/16 inch (312 mm) 7-5/16 inch (185 mm) Line Input: Level/Impedance Pre-Output Crossover HPF LPF Subsonic Filter Other Controls Variable Bass Boost Control Generals Anti-Pop Circuit Power On Indicator/Protector Indicator Dimensions (W x H x D) KS-AX3205D 2-1/8 inch (53.5 mm) 3/16 inch (4.5 mm) x 4 HOLES Control Panel 6-5/16 inch (160 mm) KS-AX3205D Circuit Class Frequency Response (0, -3dB) THD (Total Harmonic Distortion) 400W(RMS) 4Ω+4Ω Parallel (2Ω) Dimensions Key Specifications @ 4Ω Bridged @ 4Ω @ 2Ω CS-V628 CS-V6948 CS-GD1210 Topic Features Operation Channel Max. Power Output RMS Power Output CEA-2006 compliant 4ch 11-13/16 inch (300 mm) 13-7/16 inch (340 mm) Rear Panel NTK-0929-16