Download JVC KD-SH9101 User's Manual

ENGLISH
Canceling the display
demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
• It is recommended to cancel the demonstration
before you use the unit for the first time.
To cancel the display demonstration, follow
the procedure below:
1
Setting the clock
You can also set the clock system to 24 hours or
12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 47 and 48.)
SEL
2
To activate the display demonstration, repeat
the same procedure and select “Int Demo” or
“All Demo” in step 3.
• For more details, see “To show the graphics on
the display—Graphics” on page 48.
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 47 and 48.)
SEL
2
Press number button 1 to select
“MOVIE”—Movie category of the PSM
settings.
Press number button 2 to select
“CLOCK”—Clock category of the
PSM settings.
1
1
2
3
4
5
6
The “Graphics” setting screen appears on
the display.
3
2
3
4
5
The “Clock Hr” setting screen appears on
the display.
3
Adjust the hour.
ATT
Select “Off.”
ATT
4
Set the minute.
1 Select “Clock Min (minute).”
2 Adjust the minute.
4
1
Finish the setting.
2
ATT
SEL
8
EN07-09SH9101[E_EX]f.p65
8
6
03.2.27, 22:49