Download JVC GR-SX20 User's Manual

PLAYBACK Using The Cassette Adapter
EN
35
Cassette Adapter
Use this to play back an S-VHS-C/VHS-C video cassette
recorded with this camcorder on a VHS VCR. It is fully
compatible with any S-VHS/VHS video cassette recorder.
The C-P7U adapter is battery powered and automatically
performs tape loading and unloading.
1 INSERT BATTERY
Slide the battery cover up to remove it, and install
one “R6(AA)” size battery as shown in the
illustration on left, then reattach the cover.
VCR
2 INSERT CASSETTE IN ADAPTER
Compartment door
Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
3 PLAY BACK ON CONNECTED VCR
Load the cassette adapter into the VCR and play the
tape back as you would any other.
Sliding latch
Compact video cassette
Reels
Recording safety hole
Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, and push
up and remove the cassette.
NOTES:
● During tape loading and unloading, do not touch the
reels for safety and tape protection.
● Tapes recorded in S-VHS cannot be played back on
regular VHS VCR. Playback is possible with a VCR
equipped with the S-VHS function.
● During special-effect playback (slow motion, still frame,
etc.), the picture may vibrate or noise bars may appear
on the screen.
● To record on a VCR using a compact cassette and the
adapter, cover the adapter’s recording safety hole with
adhesive tape.
PLAYBACK
4 REMOVE CASSETTE FROM ADAPTER