Download JVC GR-DVM96 User's Manual

Master Page: Right
GR-DVM96-76U_09-17.fm Page 13 Friday, February 15, 2002 11:30 AM
EN
Tripod Mounting
Align the screw on the tripod with the camcorder’s
mounting socket. Then tighten the screw.
● Some tripods are not equipped with studs.
13
LCD Monitor And Viewfinder
While using the LCD monitor:
Make sure the viewfinder is pushed back in. Open
the LCD monitor fully. It can rotate 270º (90º
downward, 180º upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked.
Pull out the viewfinder fully.
● Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
180˚
CAUTION:
When attaching the camcorder to a tripod, extend
its legs to stabilize the camcorder. It is not advised
to use small sized tripods. This may cause damage
to the unit by falling over.
90˚
Brightness Adjustment Of The
Display
Rotate the MENU (MENU/BRIGHT) Wheel until the
bright level indicator on the display moves and the
appropriate brightness is reached.
BR I GHT
MENU/
BRIGHT Wheel
GR-DVM96-76U_09-17.fm
Page 13