Download JVC GET0063-001A User's Manual

KS-FX711/KS-FX511
ENGLISH
CASSETTE RECEIVER
!"#$
KS-FX711/KS-FX511
‰∑¬
KS-FX711/KS-FX511
«‘∑¬ÿ‡§√◊ËÕ߇≈Ëπ‡∑ª
KS-FX711
KS-FX711
TAPE
CD CHANGER CONTROL
LOUD
¢
FM/AM
SEL
Multi
Music
Scan
SSM
4
CDCH
DISP
7
10
9
8 MO
11 RPT
12 RND
MODE
SCM
KS-FX511
KS-FX511
CD CHANGER CONTROL
TAPE
LOUD
FM/AM
SEL
Multi
Music
Scan
7
8 MO
9
10
11 RPT
12 RND
MODE
¢
SSM
4
CDCH
DISP
SCM
For installation and connections, refer to the separate manual.
!"#$%&'()*+,-./0
°√ÿ≥“¥Ÿ§ŸË¡◊Õ∑’Ë·¬°µË“ßÀ“° „π°“√µ‘¥µ—Èß·≈–°“√‡™◊ËÕ¡µËÕ
INSTRUCTIONS
!"
§”·π–π”
GET0063-001A
[U]
CTCoverKS-FX711/511[U]4
3
4/1/02, 7:25 PM
ENGLISH
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
How to use the number buttons ................
2
2
LOCATION OF THE BUTTONS ............
3
Control panel—KS-FX711 ........................
Control panel—KS-FX511 ........................
3
4
BASIC OPERATIONS ......................
5
Turning on the power ................................
Setting the clock ......................................
Canceling Advanced SCM—SCM LINK ...
Selecting the level display—LEVEL .........
Selecting the external component
to use—EXT IN ....................................
Detaching the control panel ......................
5
RADIO OPERATIONS......................
6
Listening to the radio ................................
Storing stations in memory .......................
Tuning in to a preset station .....................
6
7
8
TAPE OPERATIONS .......................
9
Listening to a cassette .............................. 9
Finding the beginning of a tune ................ 10
Other convenient tape functions ............... 10
SOUND ADJUSTMENTS .................. 12
Adjusting the sound .................................
Turning on/off the loudness function ........
Using the sound control memory (SCM) ...
Storing your own sound adjustments ....... 14
OTHER MAIN FUNCTIONS ............... 15
12
12
13
Playing CDs ............................................. 19
Selecting CD playback modes.................. 20
EXTERNAL COMPONENT OPERATIONS ... 21
Playing an external component ................ 21
USING THE REMOTE CONTROLLER .... 22
Location of the buttons ............................. 23
TROUBLESHOOTING...................... 24
MAINTENANCE ............................ 26
SPECIFICATIONS .......................... 27
Press and hold both the SEL (select) and
time for several seconds.
This will reset the built-in microcomputer.
(standby/on/attenuator) buttons at the same
(standby/on/attenuator)
SEL (select)
Note:
Your preset adjustments – such as preset channels or
sound adjustments – will also be erased.
How to use the number buttons:
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
7
8 MO
9
10
11 RPT
12 RND
7
8 MO
9
10
11 RPT
12 RND
KS-FX711
KS-FX511
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds
without pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
BEFORE USE
*For safety....
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
2
EN02-04KS-FX711/KS-FX511[U]f
2
17
18
CD CHANGER OPERATIONS ............. 19
How to reset your unit
MODE
15
16
16
3/1/02, 12:42
LOCATION OF THE BUTTONS
ENGLISH
Control panel—KS-FX711
Display window
s d
k
g h
f
l /
j
z
1 2 3
x
p
67 8 9
5
4
TAPE
CD CHANGER CONTROL
LOUD
¢
FM/AM
SEL
Multi
Music
Scan
SSM
4
CDCH
DISP
7
q
1
2
3
4
5
6
7
8
9
p
q
w
e
r
t
y
u
we
8 MO
9
r
t
(standby/on/attenuator) button
LOUD (loudness) button
SEL (select) button
Display window
Cassette compartment
0 (eject) button
CD-CH (CD changer) button
FM/AM button
TAPE 23 button
¢/4
buttons
• Also function as SSM buttons when pressed
together.
+/– button
Remote sensor
DISP (display) button
MO (monaural) button
(Dolby B) button
RPT (repeat) button
RND (random) button
10
11 RPT
12 RND
y
u
i
MODE
SCM
o
;
a
i Number buttons
o MODE button
; SCM (sound control memory) button
a
(control panel release) button
Display window
s SCM (sound control memory) indicator
d FM band number indicators
FM1, FM2, FM3
f Main display
g Tuner reception indicators
MO (monaural), ST (stereo)
h LOUD (loudness) indicator
j RND (random) indicator
k AM band indicator
l CD-CH (CD changer) indicator
/ TAPE indicator
z Volume level indicator
x RPT (repeat) indicator
3
EN02-04KS-FX711/KS-FX511[U]f
3
3/1/02, 12:38
ENGLISH
LOCATION OF THE BUTTONS
Control panel—KS-FX511
Display window
; a
h
d f
s
j k
l
1 2 3
/
p
67 8 9
5
4
g
TAPE
CD CHANGER CONTROL
LOUD
¢
FM/AM
SEL
Multi
Music
Scan
SSM
4
CDCH
DISP
7
q
1
2
3
4
5
6
7
8
9
p
q
w
e
r
t
y
u
i
o
w
8 MO
9
e
(standby/on/attenuator) button
LOUD (loudness) button
SEL (select) button
Display window
Cassette compartment
0 (eject) button
CD-CH (CD changer) button
FM/AM button
TAPE 23 button
¢/4
buttons
• Also function as SSM buttons when pressed
together.
+/– button
DISP (display) button
MO (monaural) button
RPT (repeat) button
RND (random) button
Number buttons
MODE button
SCM (sound control memory) button
(control panel release) button
10
11 RPT
12 RND
r
t
y
MODE
SCM
u
i
Display window
; SCM (sound control memory) indicator
a FM band number indicators
FM1, FM2, FM3
s Main display
d Tuner reception indicators
MO (monaural), ST (stereo)
f LOUD (loudness) indicator
g RND (random) indicator
h AM band indicator
j CD-CH (CD changer) indicator
k TAPE indicator
l Volume level indicator
/ RPT (repeat) indicator
4
EN02-04KS-FX711/KS-FX511[U]f
4
o
3/1/02, 9:51
TAPE
CD CHANGER CONTROL
TLOUD
FM/AM
SEL
CDCH
DISP
1
9
8 MO
10
11 RPT
MODE
3
SCM
2
Turning on the power
1
12 RND
Note:
The control panel
illustration used in
this manual is of
KS-FX711.
¢
SSM
4
Multi
Music
Scan
7
ENGLISH
BASIC OPERATIONS
3
Adjust the volume.
Turn on the power.
To increase the volume.
To decrease the volume.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Volume level appears.
Select the source.
Volume level indicator
(See page 16).
4
TAPE
Adjust the sound as you want.
(See pages 12 – 14.)
FM/AM
To drop the volume in a moment
CDCH
To operate the tuner (FM or AM),
see pages 6 – 8.
To operate the tape,
see pages 9 – 11.
To operate the CD changer,
see pages 19 and 20.
To operate the external component,
see page 21.
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
for more than 1 second.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 15.
5
EN05-05KS-FX711/KS-FX511[U]f
5
3/1/02, 9:54
ENGLISH
RADIO OPERATIONS
TAPE
CD CHANGER CONTROL
LOUD
FM/AM
SEL
CDCH
DISP
7
8 MO
9
10
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
11 RPT
MODE
SCM
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Select the band (FM1 – 3, AM).
FM1
FM/AM
FM2
AM
FM1
FM3
FM/AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
4
Press
¢ to search
stations of higher
frequencies.
4
Press 4
to search
stations of lower
frequencies.
When a station is received, searching
stops.
Selected band appears.
6
EN06-08KS-FX711/KS-FX511[U]f
FM3
Press and hold
¢ or 4
until
“M (manual)” starts flashing on the
display.
¢
Start searching a station.
¢
FM2
AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
Selected band appears.
2
12 RND
¢
SSM
4
Multi
Music
Scan
6
3/1/02, 12:42
Tune in to a station you want while “M”
is flashing.
¢
Storing stations in memory
Press
¢ to tune
in to stations of higher
frequencies.
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strongstation Sequential Memory)
• Manual preset of both FM and AM stations
Press 4
to tune
in to stations of lower
frequencies.
FM station automatic preset: SSM
4
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM) until you release
the button.
When an FM stereo broadcast is hard to
receive:
1 Press MODE to enter the functions mode
while listening to an FM stereo broadcast.
ENGLISH
3
You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
1
Select the FM band (FM1 – 3) you want
to store FM stations into.
FM1
FM/AM
2
FM2
AM
FM3
Press and hold both buttons for more
than 2 seconds.
2 Press MO (monaural), while still in the
functions mode, so that the MO indicator lights
up on the display.
Each time you press the button, the MO
indicator lights up and goes off alternately.
MODE
¢
4
MO
“SSM” appears, then disappears when automatic
preset is over.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
7
EN06-08KS-FX711/KS-FX511[U]f
7
3/1/02, 12:39
4
ENGLISH
Manual preset
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
FM1
FM/AM
2
FM2
AM
Notes:
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
FM3
Tune in to a station (in this example,
of 88.3 MHz).
¢
Repeat the above procedure to store
other stations into other preset
numbers.
Press
¢ to tune
in to stations of higher
frequencies.
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on pages 7 and 8.
1
Select the band (FM1 – 3, AM).
FM1
4
FM/AM
Press 4
to tune
in to stations of lower
frequencies.
2
8 MO
9
Press and hold the number button
(in this example, 1) for more than 2
seconds.
“P 1” flashes for a few seconds.
8
EN06-08KS-FX711/KS-FX511[U]f
8
FM3
Select the number (1 – 6) for the preset
station you want.
7
3
FM2
AM
3/1/02, 9:51
10
11 RPT
12 RND
ENGLISH
TAPE OPERATIONS
TAPE
CD CHANGER CONTROL
LOUD
¢
FM/AM
SEL
SSM
4
Multi
Music
Scan
CDCH
DISP
7
8 MO
9
10
Listening to a cassette
You can play back type 1 (normal) tapes.
1
Insert a cassette into the cassette
compartment.
The unit turns on and tape
play starts automatically.
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing.
(Auto Reverse)
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE 23 turns on the
unit and tape play starts automatically.
2
Select the tape direction.
TAPE
™£
Each time you press
TAPE 23, the tape direction
changes alternately
forward (
) and
reverse (
).
11 RPT
12 RND
MODE
SCM
To fast-forward or rewind a tape
¢
4
Press
¢ for more than 1
second to fast-forward the tape.
When the tape reaches its end,
the tape is reversed and playback
starts from the beginning of the
other side.
Press 4
for more than 1
second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.
To stop fast forward or rewind at any position
on the tape, press TAPE 23.
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding, the
tape direction will be changed automatically.
Only for KS-FX711:
To play back tapes recorded with the
Dolby B NR
1 Press MODE to enter the functions mode
while listening to a tape.
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can also eject the cassette by pressing 0
while the unit is turned off.
2 Press
(Dolby B), while still in the functions
mode to set the Dolby B NR* system.
“DOLBY” appears on the display for several
seconds.
To cancel the Dolby B NR, repeat steps 1
and 2.
* Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
9
EN09-11KS-FX711/KS-FX511[U]f
9
3/1/02, 9:52
ENGLISH
Finding the beginning of a tune
Other convenient tape functions
Multi Music Scan allows you to automatically start
playback from the beginning of a specified tune.
You can specify up to 9 tunes ahead of or before
the current tune.
Skipping the blank portions on the tape
During playback
Specify how many tunes ahead of or
before the current tune the one you want
is located.
¢
You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
1
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
SEL
selected — FM, AM and
Tape.
Press
¢ to locate a tune
ahead of the current tune on
the cassette.
4
Press 4
to locate a tune
before the current tune on the
cassette.
2
Each time you press the buttons, the number
changes up to ±9.
When the beginning of the specified tune is
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, the Multi Music Scan
function may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions between
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming between
tunes.
– Tapes with tunes recorded at low recording levels.
– The Dolby NR setting does not match. For
example, if Dolby B NR is on and the tape was
recorded with no Dolby NR. (Only for KS-FX711)
Press and hold SEL (select) for more
than 2 seconds.
Press
¢ or 4
to select
“B. SKIP (blank skip).”
CLOCK H
CLOCK M
EXT IN
SCM LINK
B. SKIP
LEVEL
¢
4
3
Press + to select “ON.”
Now Blank Skip is activated.
4
Finish the setting.
SEL
To cancel Blank Skip, repeat the same procedure
and select “OFF” in step 3 by pressing –.
10
EN09-11KS-FX711/KS-FX511[U]f
10
3/1/02, 9:52
Prohibiting cassette ejection
You can play the current tune repeatedly (Repeat
Play).
You can prohibit cassette ejection and can “lock”
a cassette in the cassette compartment.
Press and hold TAPE 23 and 0 for more than 2
seconds. “NO EJECT” flashes on the display for
about 5 seconds, and the cassette is “locked.”
1 Press MODE to enter the functions mode
while playing a tune you want to hear over
again on a cassette. This unit enters the
functions mode.
2 Press RPT (repeat), while still in the functions
mode, so that the RPT indicator lights up on
the display.
MODE
11 RPT
ENGLISH
Playing the current tune repeatedly
To cancel the prohibition and “unlock” the
cassette, press and hold TAPE 23 and 0 for
more than 2 seconds again. “EJECT OK” flashes
for about 5 seconds, and this time the cassette is
“unlocked.”
Lights up when Repeat Play is turned on.
When the tune has been played, the tape is
automatically rewound to the beginning of that
tune and the same tune will be played again.
Note:
If you press 0 while cassette ejection is prohibited,
the cassette will not be ejected.
To cancel Repeat Play, repeat steps 1 and 2
again so that the RPT indicator goes off.
Note:
In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– Tapes with tunes recorded at low recording levels.
11
EN09-11KS-FX711/KS-FX511[U]f
11
3/1/02, 9:52
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
Indication
To do:
Adjust the bass.
–06 (min.)
|
+06 (max.)
TRE
Adjust the treble.
–06 (min.)
|
+06 (max.)
FAD*
Adjust the front
and rear speaker
balance.
R06 (Rear only)
|
F06 (Front only)
BAL
Adjust the left
and right speaker
balance.
L06 (Left only)
|
R06 (Right only)
VOL
Adjust the volume.
00 (min.)
|
50 (max.)
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
SEL
BAS
TRE
(bass)
FAD
(treble)
(fader)
VOL
BAL
(volume)
2
(balance)
* If you are using a two-speaker system, set the fader
level to “00.”
Adjust the level.
To increase the level.
To decrease the level.
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these
frequencies to produce a well-balanced sound at
low volume levels.
LOUD
Each time you press LOUD, the
loudness function turns on and
off alternately.
Note:
Normally, the +/– buttons work as the volume control.
So you do not have to select “VOL” to adjust the
volume level.
12
EN12-14KS-FX711/KS-FX511[U]f
Range
BAS
12
3/1/02, 9:52
You can select and store a preset sound
adjustment suitable for each playback source
(Advanced SCM).
• When “SCM LINK” is set to “LINK ON,” the
selected sound mode can be stored in memory
for the current source and the effect applies only
to the current source.
• When “SCM LINK” is set to “LINK OFF,” the
selected sound mode effect applies to any source.
Indication
For:
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, tape
and external components.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see “Canceling Advanced SCM—SCM LINK” on
page 16.
SCM OFF (Flat sound)
BEAT
Rock or
disco music
SOFT
Quiet
background
music
POP
Light music
BAS
00
+02
ENGLISH
Using the sound control memory
(SCM)
Preset values
TRE
LOUD
00
ON
00
ON
+01
–03
OFF
+04
+01
OFF
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,”
select the source.
Select the sound mode you want.
TAPE
SCM
FM/AM
CDCH
Each time you change
the playback source,
the SCM indicator
flashes on the display.
Ex.: When you select “SOFT”
Each time you press the button, the sound mode
changes as follows:
SCM OFF
BEAT
SOFT
The sound mode stored in memory for the
selected source is recalled.
POP
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on page 14.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
page 12. (Your adjustments will be canceled if
another source is selected.)
13
EN12-14KS-FX711/KS-FX511[U]f
13
3/1/02, 9:52
ENGLISH
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
SCM
4
5
Repeat steps 2 and 3 to adjust the
other items.
To turn on or off the loudness
function.
• See page 12 for details.
LOUD
6
• See page 13 for details.
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
SCM
Ex.: When you select “SOFT”
2
Your adjustment made for the selected sound
mode is stored in memory.
To adjust the bass or treble sound
level.
SEL
Select “BAS” or “TRE.”
7
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 13.
Ex.: When you select “TRE (treble)”
3
Adjust the bass or treble level.
•
See page 12 for details.
14
EN12-14KS-FX711/KS-FX511[U]f
14
3/1/02, 9:52
OTHER MAIN FUNCTIONS
2 Adjust the minute.
1
ENGLISH
Setting the clock
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
SEL
Tape.
4
Finish the setting.
SEL
2
Set the hour.
1 Select “CLOCK H (hour)” if not shown on
the display.
CLOCK H
CLOCK M
EXT IN
SCM LINK
B. SKIP
LEVEL
¢
4
To check the current clock time or change the
display mode
Press DISP (display) repeatedly. Each time you
press the button, the display mode changes as
follows:
• During tuner operation:
Frequency
Clock
• During tape operation:
2 Adjust the hour.
Play mode (tape direction)
Clock
• During external component operation:
LINE IN
Clock
• During CD changer operation:
Elapsed playing time
3
Set the minute.
Disc number
Clock
• During power off:
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
1 Select “CLOCK M (minute).”
CLOCK H
CLOCK M
EXT IN
SCM LINK
B. SKIP
LEVEL
¢
4
15
EN15-18KS-FX711/KS-FX511[U]f
15
3/1/02, 9:53
ENGLISH
Canceling Advanced SCM
—SCM LINK
4
Finish the setting.
SEL
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
1
Press and hold SEL (select) for
more than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
SEL
selected — FM, AM and
Tape.
2
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO2” is
selected.
• AUDIO1:
• AUDIO2:
• OFF:
1
CLOCK H
CLOCK M
4
EXT IN
SCM LINK
B. SKIP
LEVEL
Select the desired mode—“LINK ON”
or “LINK OFF.”
LINK ON
Level meter illuminates.
Alternates level meter and
illumination display.
Erases the audio level indicator.
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
SEL
selected — FM, AM and
Tape.
Select “SCM LINK” if not shown on
the display.
¢
3
Selecting the level display
—LEVEL
2
Select “LEVEL” if not shown on the
display.
CLOCK H
CLOCK M
EXT IN
SCM LINK
B. SKIP
LEVEL
¢
4
LINK OFF
16
EN15-18KS-FX711/KS-FX511[U]f
16
3/1/02, 9:53
Select the desired mode—“AUDIO 1,”
“AUDIO 2” or “OFF.”
AUDIO1
1
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
SEL
selected — FM, AM and
Tape.
AUDIO2
OFF
4
2
Finish the setting.
Press and hold SEL (select) for more
than 2 seconds.
ENGLISH
3
Select “EXT IN” if not shown on the
display.
SEL
CLOCK H
CLOCK M
EXT IN
SCM LINK
B. SKIP
LEVEL
¢
4
Selecting the external
component to use—EXT IN
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component –
to use.
When shipped from the factory, CD changer is
selected as the external component.
• LINE IN:
To use the external component other
than CD changer.
• CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
3
Select the desired mode—“LINE IN” or
“CHANGER.”
LINE IN
4
CHANGER
Finish the setting.
SEL
17
EN15-18KS-FX711/KS-FX511[U]f
17
3/1/02, 9:53
ENGLISH
Detaching the control panel
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel holder.
Attaching the control panel
1
Insert the left side of the control panel
into the groove on the panel holder.
Detaching the control panel
Before detaching the control panel, be sure to turn
off the power.
1
Unlock the control panel.
2
2
3
Press the right side of the control
panel to fix it to the panel holder.
Lift and pull the control panel out of
the unit.
Put the detached control panel into the
provided case.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
Connectors
18
EN15-18KS-FX711/KS-FX511[U]f
18
3/1/02, 10:33
TAPE
CD CHANGER CONTROL
LOUD
FM/AM
SEL
CDCH
DISP
7
8 MO
9
10
We recommend that you use one of the CH-X series
with your unit.
If you have another CD automatic changer, consult
your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
11 RPT
12 RND
MODE
¢
SSM
4
Multi
Music
Scan
ENGLISH
CD CHANGER OPERATIONS
SCM
Playing CDs
Select the CD automatic changer (CD-CH).
CD–
CH
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your
CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside down,
“NO CD” or “NO DISC” will appear on the
display. If this happens, remove the magazine
and set the discs correctly.
• If “RESET 1” - “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the connection
and make sure the cords are connected firmly.
Then, press the reset button of the CD
changer.
Playback starts from the first
track of the first disc.
All tracks of all discs are played
back.
Disc number
Track number
Elapsed playing time
(The clock time is shown if you press DISP
(display) to see the clock time. See page 15.)
Note on One-Touch Operation:
When you press CD-CH, the power automatically turns
on. You do not have to press
to turn on the
power.
To fast-forward or reverse the track.
¢
Press and hold
¢, while
playing a CD, to fast-forward the
track.
4
Press and hold 4
, while
playing a CD, to reverse the
track.
19
EN19-20KS-FX711/KS-FX511[U]f
19
3/1/02, 12:51
ENGLISH
To go to the next track or the previous tracks
¢
4
Press
¢ briefly, while
playing a CD, to go ahead to
the beginning of the next track.
Each time you press the button
consecutivelys, the beginning of
the next tracks is located and
played back.
Press 4
briefly, while
playing a CD, to go back to the
beginning of the current track.
Each time you press the button
consecutively, the beginning of
the previous tracks is located
and played back.
Selecting CD playback modes
To play back tracks at random (Random Play)
1 Press MODE to enter the functions mode
while playing a CD. This unit enters the
functions mode.
2 Press RND (random), while still in the
functions mode, so that the RND indicator
lights up on the display.
12 RND
MODE
Then, each time you press RND, the random
play mode changes as follows:
RND1
RND2
Canceled
To go to a particular disc directly
Press the number button corresponding to the disc
number to start its playback (while the CD changer
is playing).
7
8 MO
9
10
11 RPT
12 RND
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Disc number
RND
Plays at random
Indicator
RND1
Lights
All tracks of the current
(random1)
disc, then the tracks of
the next disc, and so on.
RND2
Flashes
All tracks of all discs
(random2)
inserted in the magazine.
Mode
To play back tracks repeatedly (Repeat Play)
1 Press MODE to enter the functions mode
while playing a CD. This unit enters the
functions mode.
2 Press RPT (repeat), while still in the functions
mode, so that the RPT indicator lights up on
the display.
MODE
Track number
Ex. When disc number 3 is selected
11 RPT
Then, each time you press RPT, the repeat play
mode changes as follows:
RPT1
RPT2
Canceled
Mode
RPT1
(repeat1)
RPT2
(repeat2)
Plays
RPT
Indicator repeatedly
Lights
The current track (or
specified track).
Flashes
All tracks of the current
disc (or specified disc).
20
EN19-20KS-FX711/KS-FX511[U]f
20
3/1/02, 9:53
TAPE
CD CHANGER CONTROL
LOUD
¢
FM/AM
SEL
SSM
4
Multi
Music
Scan
CDCH
DISP
7
8 MO
9
10
11 RPT
Playing an external component
2
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
3
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “Selecting the external component to
use—EXT IN” on page 17.)
1
4
12 RND
MODE
ENGLISH
EXTERNAL COMPONENT OPERATIONS
SCM
Turn on the connected component
and start playing the source.
Adjust the volume.
Adjust the sound as you want.
(See pages 12 – 14.)
Select the external component
(CD-CH).
CD–
CH
• If “LINE IN”* does not appear on the display, see
page 17 and select the external input (“LINE IN”).
* Displayed only when one of the following sources is
selected — FM, AM and Tape.
Note on One-Touch Operation:
When you press CD-CH, the power automatically
comes on. You do not have to press
to turn
on the power.
21
EN21-21KS-FX711/KS-FX511[U]f
21
3/1/02, 9:53
USING THE REMOTE CONTROLLER
ENGLISH
This section is only for KS-FX711.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
2. Place the battery.
Slide the battery into the holder with the + side
facing upwards so that the battery is fixed in
the holder.
Lithium coin battery
(product number:
CR2025)
3. Return the battery holder.
Insert again the battery holder pushing it until
you hear a clicking sound.
Remote sensor
(back side)
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Installing the battery
When the controllable range or effectiveness of the
remote controller decreases, replace the battery.
• Do not leave the remote controller in a place
(such as the dashboard) exposed to direct
sunlight for a long time.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point
pen or a similar tool.
2) Remove the battery holder.
(back side)
1)
2)
WARNING:
• Store the battery in a place where children cannot
reach.
If a child accidentally swallows the battery, consult
a doctor immediately.
• Do not recharge, short, disassemble or heat the
battery or dispose it in a fire.
Doing any of these things may cause the battery to
give off heat, crack or start a fire.
• Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off heat,
crack or start a fire.
• When throwing away or saving the battery, wrap it
in tape and insulate; otherwise, the battery may
start to give off heat, crack or start a fire.
• Do not poke the battery with tweezers or similar
tools.
Doing this may cause the battery to give off heat,
crack or start a fire.
CAUTION:
DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight for
a long time. Otherwise it may be damaged.
22
EN22-23KS-FX711/KS-FX511[U]f
22
3/1/02, 10:33
RM-RK31
5
6
1
2
7
3
4
1 • Turns on the unit if pressed when the unit is
turned off.
• Turns off the unit if pressed and held for more
than 1 second.
• Drops the volume level in a moment if pressed
briefly.
Press again to resume the volume.
2 • Functions as the BAND button while listening
to the radio.
Each time you press the button, the band
changes.
• Functions as the DISC + button while listening
to the CD changer.
Each time you press the button, the disc
number increases, and the selected disc
starts playing.
• Functions as the PROG button while listening
to a tape.
Each time you press the button, the tape
direction changes alternately.
3 • Functions as the PRESET button while
listening to the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
• Functions as the DISC – button while
listening to the CD changer.
Each time you press the button, the disc
number decreases, and the selected disc
starts playing.
4 Functions the same as the +/– on the main unit.
NOTE: These buttons cannot be used for the clock
(CLOCK H, CLOCK M), SCM LINK,
LEVEL, B. SKIP and EXT IN adjustments
(see pages 15, 16, 10 and 17).
5 Selects the sound mode.
Each time you press the button, the mode
changes.
6 Selects the source.
Each time you press the button, the source
changes.
7 • Searches stations while listening to the radio.
• Fast-forwards or reverses the track if pressed
and held while listening to a CD.
• Skips to the beginning of the next track or goes
back to the beginning of the current (or
previous tracks) if pressed briefly while
listening to a CD.
• Functions as the fast forward or rewind buttons
or Multi Music Scan buttons while listening to
a tape.
ENGLISH
Location of the buttons
23
EN22-23KS-FX711/KS-FX511[U]f
23
4/1/02, 15:34
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• A cassette tape cannot be
inserted.
You have tried to insert a
cassette in the wrong way.
Insert the cassette with the
exposed tape facing to the right.
• A cassette tape cannot be
ejected.
Cassette ejection is prohibited.
Press and hold TAPE 23 and
0 for more than two seconds.
• Cassette tapes become hot.
This is not a malfunction.
• Tape sound is at very low
level and sound quality is
degraded.
The tape head is dirty.
Clean it with a head cleaning
tape.
• Sound is sometimes
interrupted.
Connections are not good.
Check the cords and
connections.
• Sound cannot be heard from
the speakers.
The volume is turned to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Check the cords and
connections.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Signals are too weak.
Store stations manually.
• Static noise while listening to
the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
• This unit does not work at all.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Press and hold both the SEL
(select) and
buttons
at the same time for several
seconds. (The clock setting and
preset stations stored in
memory are erased.)
(See page 2.)
24
EN24-27KS-FX711/KS-FX511[U]f
24
3/1/02, 10:06
Symptoms
Causes
• “NO CD” or “NO DISC”
appears on the display.
• “RESET 8” appears on the
display.
Remedies
No CD is in the magazine.
Insert CDs into the magazine.
CDs are inserted incorrectly.
Insert them correctly.
This unit is not connected to a
CD changer correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
• “RESET 1” - “RESET 7”
appears on the display.
ENGLISH
When connecting to the CD changer:
Press the reset button of the
CD changer.
• The CD changer does not
work at all.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Press and hold both the SEL
(select) and
buttons
at the same time for several
seconds. (The clock setting and
preset stations stored in
memory are erased.)
(See page 2.)
25
EN24-27KS-FX711/KS-FX511[U]f
25
3/1/02, 10:06
ENGLISH
MAINTENANCE
This unit requires very little attention, but you will
be able to extend the life of the unit if you follow
the instructions below.
To clean the head
CAUTION:
• Do not play the cassettes with peeling labels;
otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape
may become entangled with the mechanism.
• Do not leave a cassette in the cassette
compartment after use, as the tape may become
slack.
The function below is also provided to ensure the
longer life of this unit.
Ignition key-off release/Ignition key-on
play
• Clean the head after every 10 hours of use using
a wet-type head cleaning tape (available at an
audio store).
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
• Turning off the ignition key with a cassette in the
compartment automatically releases the tape
from the unit’s tapehead.
• Turning on the ignition key with a cassette in the
compartment starts playback automatically if you
turned off the ignition during tape play.
To keep the tape clean
• Always store the cassettes in their storage cases
after use.
• Do not store cassettes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
26
EN24-27KS-FX711/KS-FX511[U]f
26
3/1/02, 10:06
AUDIO AMPLIFIER SECTION
CASSETTE DECK SECTION
Maximum Power Output:
Front:
45 W per channel
Rear:
45 W per channel
Continuous Power Output (RMS):
Front:
17 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Rear:
17 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass:
±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
Frequency Response: 40 Hz to 20000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 kΩ load (250 nWb/m)
Wow & Flutter: 0.11% (WRMS)
Fast-Wind Time: 100 sec. (C-60)
Frequency Response:
For KS-FX711:
30 Hz to 16000 Hz (Normal tape with
Dolby B NR OFF)
For KS-FX511:
30 Hz to 16000 Hz (Normal tape)
Signal-to-Noise Ratio: (Normal tape):
For KS-FX711:
(Dolby B NR ON): 65 dB
(Dolby B NR OFF): 56 dB
For KS-FX511: 56 dB
Stereo Separation: 40 dB
TUNER SECTION
Frequency Range:
FM:
87.5 MHz to 108.0 MHz
AM:
531 kHz to 1 602 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
ENGLISH
SPECIFICATIONS
GENERAL
Power Requirement:
Operating Voltage: DC 14.4 V
(11 V to16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W × H × D):
Installation Size: 182 mm × 52 mm × 150 mm
Panel Size: 188 mm × 58 mm × 14 mm
Mass: 1.4 kg (excluding accessories)
Design and specifications subject to change without
notice.
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
Having TROUBLE with operation?
Please reset your unit
Refer to page 2
27
EN24-27KS-FX711/KS-FX511[U]f
27
3/1/02, 10:06
wd
KS-FX711/KS-FX511
XOU Wd« qÒGA l uœ«—
KS-FX711
KS-FX711
TAPE
CD CHANGER CONTROL
LOUD
¢
FM/AM
SEL
Multi
Music
Scan
SSM
4
CDCH
DISP
7
8 MO
9
10
11 RPT
12 RND
MODE
SCM
KS-FX511
KS-FX511
CD CHANGER CONTROL
TAPE
LOUD
FM/AM
SEL
Multi
Music
Scan
7
8 MO
9
10
11 RPT
12 RND
MODE
¢
SSM
4
CDCH
DISP
SCM
Æq?? ?B? ? H? ? M? ? *« U?? ?L? ? O? ? K? ? F? ? ²? ? « V?? ?O? ? ²? ? W?? F? ?ł«d?? ? v?? łd?? ?¹ ¨ö?? ?O? ? u?? ?²? ?«Ë V?? ?O? ? d?? ?²? ? « U?? ?O? ? K? ? L? ? F? ?
q?? ?O? ?œ
U?? L? ?O? ?K? ?F? ?²? ?«
EN, CH, TH, AR
AR COVER KS-FX711/511[U]-Final
V
J
2
C
0102KKSMDTJEIN
7/1/02, 11:10 am
KS-FX711/KS-FX511
Installation/Connection Manual
!"#$
°“√µ‘¥µ—ßÈ /§Ÿ¡Ë Õ◊ °“√µ‘¥µ—ßÈ
ØVOd²« ULOKFð VÒO²
qOu²«
GET0063-002A
V
J
C
0102KKSMDTJEIN
EN, CH, TH, AR
[U]
ENGLISH
wÐdŽ
‰∑¬
• This unit is designed to operate on 12 V DC,
NEGATIVE ground electrical systems.
• !"#$%12V !"#$%&'( • ™ÿ¥ª√–°Õ∫™ÿ¥π’È ‰¥È√—∫°“√ÕÕ°·∫∫¡“‡æ◊ËÕ„™Èß“π°—∫√–∫∫°√–
INSTALLATION
(IN-DASH MOUNTING)
!
!"#$%
• The following illustration shows a typical
installation. However, you should make
adjustments corresponding to your specific car.
If you have any questions or require information
regarding installation kits, consult your JVC car
audio dealer or a company supplying kits.
• JVC
1
Before mounting: Press
(Control
Panel Release button) to detach the control
panel if already attached.
* When shipped from the factory, the control
panel is packed in the hard case.
2
3
Remove the trim plate.
Remove the sleeve after disengaging the
sleeve locks.
1 Stand the unit.
Note: When you stand the unit, be careful
not to damage the fuse on the rear.
2 Insert the 2 handles between the unit and
the sleeve, as illustrated, to disengage
the sleeve locks.
3 Remove the sleeve.
Note: Be sure to keep the handles for
future use after installing the unit.
4
5
6
7
8
9
Install the sleeve into the dashboard.
* After the sleeve is correctly installed into
the dashboard, bend the appropriate tabs
to hold the sleeve firmly in place, as
illustrated.
Fix the mounting bolt to the rear of the unit’s
body and place the rubber cushion over the
end of the bolt.
Do the required electrical connections.
· ‰øøÈ“ “¬¥‘π¢—È«≈∫°√–· µ√ß 12 ‚«≈∑Ï
!"#$%&' ()*+,-./01 • ¿“æµ—«Õ¬Ë“ßµËÕ‰ªπ’È· ¥ß∂÷ß°“√µ‘¥µ—Èß·∫∫∑—Ë«‰ª լ˓߉√°Áµ“¡
§ÿ≥§«√ª√—∫·µËß„ÀȇÀ¡“– ¡°—∫√∂¢Õߧÿ≥‡Õß À“°§ÿ≥¡’ª—
!"#$%&'!()*+",-./
≠À“À√◊ÕµÈÕß°“√¢ÈÕ¡Ÿ≈‡°’ˬ«°—∫™ÿ¥µ‘¥µ—Èß °√ÿ≥“ª√÷°…“°—
!"#$%& '()*+,-.#/0
∫ºŸ¢È “¬‡§√◊ËÕ߇ ’¬ß√∂¬πµÏ JVC ¢Õß∑Ë“πÀ√◊Õ∫√‘…—
!"#$%&'()*+,-.
∑∑’®Ë ”ÀπË“¬™ÿ¥µ‘¥µ—ßÈ π’È
!" !"#$%&'()*
!"#$%&' !"#$%
* !"#$%&'()*+,&-./0
!"#
!"#$%&'()&*+
1 !"#
!"#$%&'()*+, !
2 !"#$%&'(%)*+,-./
!"#$%&'()*+,
3 !"#$
!"#$%&'()*+,#
!"#$
4
!"#$%&'()
* !"#$%&'()*+,-./0
!"#$%&'()"*+,-./
5
!"#$%&&'()*+,-.
!"#$%&'(
6
7
8
!"#$%&'
!"#$
Slide the unit into the sleeve until it is locked.
Attach the trim plate so that the projection
on the trim plate is fixed to the left side of
the unit.
uKÐUð ‡ qš«œ ® “UN'« VOdð
©…—UO«
°“√µ‘¥µ—Èß (°“√ª√–°Õ∫·ºßÀπÈ“ª—∑¡Ï‡¢È“)
1
2
3
9
%&'()*+,-./
!"#$%&'
!"#
—U??O? ð W??D? Ý«u??Ð q??L? F? O? “U?N?'« «c?¼ r?L?b?I? •
W?? L? ?E? ?½« ¨X?? u?? A ±≤ ¨DC d?? ýU?? ³? . w?? zU?? Ðd?? N? ?
ÆVUÝ i¹—Qð WOzUÐdN
!#()*+,-
1 °ËÕπª√–°Õ∫ °¥ªÿ¡Ë
(ª≈¥·ºß§«∫§ÿ¡)
‡æ◊ËÕÕÕ°®“°·ºß§«∫§ÿ¡
* ‡¡◊ËÕº≈‘µ¿—≥±Ï∂Ÿ° ËßÕÕ°¡“®“°‚√ßß“π
·ºßÀπÈ“ª—¥®–∫√√®ÿ‰«È„π≈—ß·¢Áß
2 ∂Õ¥·ºËπ‚≈À–¢Õ∫·µËßÕÕ°
3 ∂Õ¥ª≈Õ°ÀÿÈ¡ÕÕ°À≈—ß®“°ª≈¥∑’Ë≈ÁÕ§ª≈Õ°ÀÿÈ¡ÕÕ°·≈È«
1 ®—∫™ÿ¥ª√–°Õ∫µ—ßÈ ¢÷πÈ
À¡“¬‡Àµÿ : ‡¡◊ÕË §ÿ≥µ—ßÈ ™ÿ¥ª√–°Õ∫¢÷πÈ
√–«—ßլ˓∑”„ÀÈø‘« Ï∫√‘‡«≥ Ë«π∑È“¬‡ ’¬À“¬
2 „ ˧—π∫—ߧ—∫ 2 Õ—π√–À«Ë“ß™ÿ¥ª√–°Õ∫°—∫ª≈Õ°ÀÿÈ¡ (¥—ß¿“æ)
‡æ◊ËÕª≈¥∑’Ë≈ÁÕ§ª≈Õ°ÀÿÈ¡ÕÕ°®“°°—π
3 ª≈¥ª≈Õ°ÀÿÈ¡ÕÕ°
À¡“¬‡Àµÿ : √–¡—¥√–«—ß„Àȧπ— ∫—ߧ—∫ “¡“√∂„™Èß“π‰¥ÈµÕË ‰ªÀ≈—ß
®“°µ‘¥µ—Èß™ÿ¥ª√–°Õ∫·≈È«
4 µ‘¥µ—Èߪ≈Õ°ÀÿÈ¡≈ß„π·ºßÀπÈ“ª—∑¡Ï
* À≈—ß®“°µ‘¥µ—Èߪ≈Õ°ÀÿÈ¡≈ß„π·ºßÀπÈ“ª—∑¡Ïլ˓ß∂Ÿ°µÈÕß·≈È«
¥—¥√ËÕß„ÀÈ‚§ÈßæÕ¥’∑’˪≈Õ°ÀÿÈ¡®–∂Ÿ°¬÷¥‰«Èլ˓߷πËπÀπ“
(¥—ß¿“æ)
5 µ‘¥ ≈—°ª√–°Õ∫∫√‘‡«≥¥È“πÀ≈—ß‚§√ߢÕß™ÿ¥ª√–°Õ∫·≈–«“߬“ß°—
π°√–·∑°‰«È∫π Ë«πª≈“¬¢Õß ≈—°
6 µËÕ “¬‰øµ“¡∑’Ë°”À𥉫È∑—ÈßÀ¡¥
7 ‡≈◊ËÕπ™ÿ¥ª√–°Õ∫≈ß„πª≈Õ°ÀÿÈ¡®π‡¢È“°—π‰¥ÈæÕ¥’
8 „ Ë·ºËπª√–¥—∫ ‚¥¬„ÀÈ¢Õ∫¢Õß·ºËπª√–¥—∫¬÷¥µ‘¥·πËπ
°—∫¥È“π´È“¬¢Õߺ≈‘µ¿—≥±Ï
9 µËÕ‡¢È“°—∫·ºß§«∫§ÿ¡
!"#$
Attach the control panel.
1
W??I? ¹d??Þ w??U??²? « w??×? O? {u??²? « r??Ýd??« s??ÒO??³? ¹ •
q?L?Ž p?O?K?Ž V−¹ ¨p– l. ÆWOU¦*« VOd²«
ÆU?N?J?K?²?9 w?²« …—UO« Ÿu½ oÐUDð ö¹bFð
U.uKF* WłUŠ Ë« «—UH²Ý« „UM¼ ÊU «–«
…—U?A?²?Ý« vłd¹ ¨VOd²« «Ëœ« ’uBZÐ
JVC W—U. «—UOK WOðuB« …eNłô« Ÿ“u.
Æ «Ëœô« …cN WŽ“u*« WdA« Ë«
“d« jG{« ∫VOd²« ¡bÐ q³
d¹d% —“®
ÆrJײ« WŠu qBA qł« s. ©rJײ« WŠu
rJײ« WŠu l{Ë - ¨lMB*« s. s×A« bMŽ *
Æ‚ËbMB« qš«œ
ÆWM¹e« WŠu Ÿe½«
qJON« U²³¦. qBA bFÐ w«u« qJON« Ÿe½«
Æw«u«
ÆÍœuLŽ qJAÐ “UN'« nË« ±
ÂbŽ s. bQ𠨓UN'« nOuð bMŽ ∫WEŠö.
WN'« wA œułu*« “uOH« ·öð« Ë« —dCð
Æ“UN'« s. WOHK)«
¨w«u« qJON«Ë “UN'« 5Ð 5²U*« qšœ« ≤
U²³¦. qB?H ¨qJA« wA 5³?. u¼ UL
Æw«u« qJON«
Æw«u« qJON« Ÿe½« ≥
s. UU*« vKŽ WEAU;« włd¹ ∫WEŠö.
Æ“UN'« VOdð bFÐ UIŠô ‰ULF²Ýô« qł«
Æ…—UO« uKÐUð qš«œ w«u« qJON« V—
uK?ÐU?ð qš«œ U?O?K? w«u?« q?JO?N?« VO?d?ð bF?Ð *
qJ?AÐ WM?_« w?MŁ« ¨`?O× q?JA?Ð …—UO?«
rJ×. q?JAÐ w«u« qJON« XO³?¦² VÝUM.
ÆqJA« wA 5³. u¼ UL ¨`O×B« ÊUJ*« wA
s?. W?O?HK?)« W?N?'U?Ð V?O?d?²?« —U?L??. X?³?
Ò Ł
WOÞUD*« …uA(« l{ p– bFÐË “UN'« qJO¼
Æ—UL*« W¹UN½ ‚uA
ÆWÐuKD*« öOu²« qLŽ«
X³¦¹ v²Š w«u« qJON« qš«œ “UN'« qšœ«
Æ`O× qJAÐ
¡u²M« XO³¦ð r²¹ YO×Ð WM¹e« WŠu VÒ—
d¹ô« V½U'« vKŽ WM¹e« WŠu vKŽ œułu*«
Æ“UN−K
ÆrJײ« WŠu VÒ—
2
Control panel
!
Trim plate
·ºß§«∫§ÿ¡
rJײ« WŠu
·ºËπ‚≈À–¢Õ∫·µËß
WM¹e« WŠu
Dashboard
·ºßÀπÈ“ª—∑¡Ï
…—UO« uKÐUð
3
Rubber cushion
!"
¬“ß°—π°√–·∑°Ï
WOÞUD*« …uA(«
Handle
!"
Lock Plate
§—π∫—ߧ—∫
WU*«
Sleeve
!
·ºËπ‚≈À–¬÷¥ (Lock Plate)
XO³¦²« W×OH
4
ª≈Õ°Àÿ¡È
w«u« qJON«
7
8
ø‘« Ï
“uOH«
4*
9
ª≈Õ°Àÿ¡È
w«u« qJON«
InstalKS-FX711_511-Final
1
m
53
5
mm
≈—°ª√–°Õ∫
VOd²« —UL.
Fuse
Sleeve
!
4m
Mounting bolt
!
Slot
√ËÕß„™È ”À√—∫æ—π≈«¥
dOG oý
Ò
18
6
See “ELECTRICAL CONNECTIONS.”
!"#
¥ŸÀ«— ¢ÈÕ °“√µËÕ “¬‰ø
ÆåWOzUÐdNJ« öOu²«ò r dE½«
Control panel
!
Trim plate
·ºß§«∫§ÿ¡
rJײ« WŠu
·ºËπ‚≈À–¢Õ∫·µËß
WM¹e« WŠu
1/9/02, 3:48 PM
±
≤
≥
¥
µ
∂
∑
∏
π
• When using the optional stay
• !"#
• ‡¡◊ËÕ„™Èµ—«¬÷¥·∫∫‡≈◊Õ°‰¥È (“¡“√∂‡≈◊Õ°‡ª‘¥§È“߉«È ‰¥È)
• When installing the unit without using the sleeve
• !"#$%&'($
• ‡¡◊ËÕµ‘¥µ—Èß™ÿ¥ª√–°Õ∫‚¥¬‰¡Ë „™Èª≈Õ°ÀÿÈ¡
XO³¦²K wAU{« bM. «bZ²Ý« bMŽ •
w«u« qJON« «bZ²Ý« ÊËbÐ “UN'« Vdð U.bMŽ •
In a Toyota for example, first remove the car radio and install the unit in its place.
!TOYOTA !"#$%&'()*+,-.)/012&3456
Fire wall
Stay (option)
!"
ºπ—ß°—π‰ø
s. W¹UL(« —«bł
o¹d(«
µ—«¬÷¥ (‡≈◊Õ°‰¥È)
XO³¦ð bM.
©wAU{«®
Washer
ª√–‡°Áπ«ß·À«π
ÂUJŠ« WIKŠ
qOu²«
Dashboard
·ºßÀπÈ“ª—∑¡Ï
…—UO« uKÐUð
µ—«Õ¬Ë“߇™Ëπ „π√∂¬πµÏ‚µ‚¬µÈ“ „ÀÈ∂Õ¥«‘∑¬ÿµ‘¥√∂¬πµÏÕÕ°°ËÕπ·≈–µ‘¥µ—Èß™ÿ¥ª√–°Õ∫π’ȇ¢È“‰ª·∑π
Æt½UJ. wA “UN'« VÒ— p– bFÐ ôË« …—UO« u¹œ«— Ÿe½« ¨Uðu¹uð Ÿu½ «—UOÝ wA ¨‰U¦*« qO³Ý vKŽ
Flat type screws (M5 x 6 mm)*
! (M5 x 6 mm)*
°√ŸÀ—«‡√’¬∫ (M5 x 6 ¡‘≈≈‘‡¡µ√)*
*©rK. ∂ x M5® …bŽUI« W¹u². wž«dÐ
Lock nut
!
πÕµ≈ÁÕ§
XO³¦²« WuL
Pocket
Screw (option)
!"
Sleeve
!
Mounting bolt
!
ª≈Õ°Àÿ¡È
w«u« qJON«
≈—°µ‘¥
VOd²« —UL.
Removing the unit
Bracket*
*
·∑Ëπ√Õß√—∫*
*XO³¦²« WOH²
°–‡ª“–
VOł
°√Ÿ (‡≈◊Õ°‰¥È)
©wAU{«® wždÐ
* Not included with this unit.
* !"#$
* ‰¡Ë√«¡°—∫™ÿ¥ª√–°Õ∫π’È
Æ“UN'« «c¼ l. œÒËe. dOž *
Flat type screws (M5 x 6 mm)*
! (M5 x 6 mm)*
°√ŸÀ—«‡√’¬∫ (M5 x 6 ¡‘≈≈‘‡¡µ√)*
*©rK. ∂ x M5® …bŽUI« W¹u². wž«dÐ
Bracket*
*
·∑Ëπ√Õß√—∫*
*XO³¦²« WOH²
Note: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are
used, they could damage the unit.
!"#$%&'()*+,6mm !"#$%&' !"()*+,-#
À¡“¬‡Àµÿ : ‡¡◊ËÕµ‘¥µ—Èß™ÿ¥ª√–°Õ∫≈ß„π·∑Ëπ√Õß√—∫‰«È „ÀÈ„™È °√Ÿ¬“«¢π“¥ 6 ¡‘≈≈‘‡¡µ√ ∂È“„™È °√Ÿ¬“«°«Ë“π’ÈÕ“®∑”„ÀÈ™ÿ¥ª√–°Õ∫‡ ’¬À“¬‰¥È
w?ž«d?Р«b?Z?²?Ý« W?U?Š w?A Ær?K. ∂ ‰uÞ wž«dÐ ÂbZ²Ý« s. bQð ¨XO³¦²« WOH² vKŽ “UN'« VOdð bMŽ ∫W?EŠö.
Æ“UN'« —d{ Ë« nKð V³¹ Ê« sJ1 p– ÊUA ¨rK. ∂ s. ‰uÞ«
!
°“√∂Õ¥™ÿ¥ª√–°Õ∫
• Before removing the unit, release the rear • !"#$%&!"'()*+,-.(/ • °ËÕπ®–∂Õ¥™ÿ¥ª√–°Õ∫ „ÀȪ≈¥ÀπÈ“µ—¥ Ë«π∑È“¬°ËÕπ
section.
1 ∂Õ¥·ºß§«∫§ÿ¡
1 Remove the control panel.
1 !"#$
2 ∂Õ¥·ºËπ‚≈À–¢Õ∫·µËß
2 Remove the trim plate.
3 „ ˧—π∫—ߧ—∫ 2 Õ—π≈ß„π√ËÕß ”À√—∫„™Èæπ— ≈«¥ ¥—ß¿“æ
2 !"#
3 Insert the 2 handles into the slots, as shown.
®“°π—Èπ„Àȇ≈◊ËÕπ™ÿ¥ª√–°Õ∫ÕÕ° „π¢≥–∑’˧ËÕ¬ Ê
Then, while gently pulling the handles away 3 !"#$%&'()*+,-."/
¥÷ߧ—π∫—ߧ—∫∑—Èß ÕßÕ—πÕÕ°®“°°—π (¥Ÿ„ÀÈ¥’«Ë“§—π∫—ߧ—∫∑—Èß ÕßÕ—
from each other, slide out the unit. (Be sure
!"#$%&'#()*+,-./
πÕ¬ŸË „πµ”·ÀπËß∑’ˇÀ¡“– ¡À≈—ß®“°µ‘¥µ—Èß·≈È«)
to keep the handles after installing it.)
!"#$%&'()*+,-.
1
2
…—UO« uKÐUð s. “UN'« Ÿe½
ÆwHK)« ¡e'« —dŠ ¨“UN'« Ÿe½ q³ •
ÆrJײ« WŠu Ÿe½« ±
ÆWM¹e« WŠu Ÿe½« ≤
5³. u¼ UL ¨‚uIA« qš«œ 5²U*« qšœ« ≥
5²U*« V×Ý ¡UMŁ« ¨p– bFÐ ÆqJA« wA
V?×?Ý« ¨Èd?šô« s?Ž …b?Š«u?« «b?OFÐ WAUDKÐ
Æ×U)« v« “UN'«
VOdð bFÐ 5²U*UÐ pþUH²Š« s. bQð®
©“UN'«
3
Control panel
!
Trim plate
Handle
!"
·ºß§«∫§ÿ¡
rJײ« WŠu
·ºËπ‚≈À–¢Õ∫·µËß
WM¹e« WŠu
§—π∫—ߧ—∫
WU*«
Parts list for installation and connection
The following parts are provided with this unit.
After checking them, please set them correctly.
!"#$%&'(
√“¬°“√ Ë«πª√–°Õ∫ ”À√—∫µ‘¥µ—Èß·≈–‡™◊ËÕ¡µËÕ°—π
Ë«πª√–°Õ∫µËÕ‰ªπ’È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’È À≈—ß®“°µ√«® Õ∫·≈È«
ª√—∫µ—È߇§√◊ËÕß„ÀÈ∂Ÿ°µÈÕß
!"#$%&'()
!"#$%&'()*
qOu²«Ë VOd²« ¡«eł« WLzU
Æ“UN'« l. …œËe. WOU²« ¡«ełô«
qJAÐ rN³Odð vłd¹ ¨¡«ełô« Ác¼ h×A bFÐ
Æ`O×
Hard case/Control panel
!"#$
Sleeve
!
Trim plate
Lock nut (M5)
!=(M5)
≈—ß∫√√®ÿ/ÀπÈ“ª—¥
rJײ«WŠË«Ø‚ËbM
ª≈Õ°Àÿ¡È
w«u« qJON«
·ºËπ‚≈À–¢Õ∫·µËß
WM¹e« WŠu
πÕµ≈ÁÕ§ (M5)
©M5® XO³¦ð≤‰« WuL
Only for KS-FX711
hpJcuTNN
KS-FX711
”À√—∫√ÿËπ
KS-FX711
q¹œuLK
Remote controller
Power cord
!"#$%&
Handles
!"
Rubber cushion
!"
Washer (ø5)
=(ø5)
Mounting bolt (M5 x 20 mm)
!=(M5 x 20 mm)
“¬‡§‡∫‘≈°”≈—ß (Power Cord)
WOzUÐdNJ« WUD« pKÝ
§—π∫—ߧ—∫
UU*«
¬“ß°—π°√–·∑°
WOÞUD*« …uA(«
ª√–‡°Áπ«ß·À«π (ø5)
©µ dD® qOu²« ÂUJŠ« WIKŠ
≈—°µ‘¥ (M5 x 20 ¡‘≈≈‘‡¡µ√)
©rK. ≤∞ x M5® VOd²« —UL.
ELECTRICAL CONNECTIONS
To prevent short circuits, we recommend that you
disconnect the battery’s negative terminal and make
all electrical connections before installing the unit. If
you are not sure how to install this unit correctly, have
it installed by a qualified technician.
Note:
This unit is designed to operate on 12 V DC, NEGATIVE
ground electrical systems. If your vehicle does not
have this system, a voltage inverter is required, which
can be purchased at JVC car audio dealers.
• Replace the fuse with one of the specified rating. If
the fuse blows frequently, consult your JVC car
audio dealer.
• If noise is a problem...
This unit incorporates a noise filter in the power
circuit. However, with some vehicles, clicking or
other unwanted noise may occur. If this happens,
connect the unit’s rear ground terminal (see
connection diagram) to the car’s chassis using
shorter and thicker cords, such as copper braiding
or gauge wire. If noise still persists, consult your
JVC car audio dealer.
• Maximum input of the speakers should be no more
than 45 W at the rear and 45 W at the front, with an
impedance of 4 Ω to 8 Ω.
• Be sure to ground this unit to the car’s chassis.
• The heat sink becomes very hot after use. Be careful
not to touch it when removing this unit.
!"#$% 12V !"#$%&'
!"#$%&'()*+,-./'0(
!"#$% JVC !"#$%&'(
• !"#$%&'()* !+,-
!"#$% JVC !"#$%&'
• !"#$
!"#$%&'()*+,-./0 1
!"#$%&&'()*+,-./01
!"#$%&'()*+,-./0(1
!"#$%&'()*+ !"
!"#$%& !"#$%&'()
JVC !"#$%&'
• !"#$%&'()*+,%- 45 !"#$%&'45 !"#$4 – 8
• !"#$%&'()
• !"#$%&'(%)*+#,-.
!"#$%&'()
Heat sink
!
°“√‡™◊ËÕ¡‚¥¬„™È ‰øøÈ“
!"#$%&'()*+,#-./01 ‡æ◊ËÕªÈÕß°—π‰øøÈ“≈—¥«ß®√ ‡√“¢Õ·π–π”„Àȧÿ≥‡Õ“¢—È«
!"#$%&'()*+,-./012 ≈∫·∫µ‡µÕ√’ËÕÕ°°ËÕπ·≈–∑”°“√‡™◊ËÕ¡‚¥¬„™È ‰øøÈ“∑ÿ°®ÿ¥°ËÕπ∑’Ë®–µ‘¥µ—Èß
!"#$%&'()*+,-./01# ™ÿ¥ª√–°Õ∫ ∂È“§ÿ≥‰¡Ë·πË„®«Ë“µ‘¥µ—Èß™ÿ¥ª√–°Õ∫π’È∂Ÿ°µÈÕßÀ√◊Õ‰¡Ë
„ÀÈÀ“™Ë“ߺŸÈ‡™’ˬ«™“≠‡ªÁπºŸÈµ‘¥µ—Èß
À¡“¬‡Àµÿ :
™ÿ¥ª√–°Õ∫π’È ‰¥È√—∫°“√ÕÕ°·∫∫¡“‡æ◊ËÕ„™Èß“π°—∫√–∫∫°√–
· ‰øøÈ“ “¬¥‘π¢—È«≈∫°√–· µ√ß 12 ‚«≈∑Ï
À“°√∂¬πµÏ¢Õߧÿ≥‰¡Ë ‰¥È „™È√–∫∫π’È
µÈÕß„™È‡§√◊ËÕß·ª≈ß°√–· ‰ø™Ë«¬
´÷Ëß “¡“√∂À“´◊ÈÕ‰¥È®“°√È“π¢“¬‡§√◊ËÕ߇ ’¬ß√∂¬πµÏ JVC
ë „™Èæ‘°—¥®”‡æ“–·∑πø‘« Ï À“°ø‘« Ï¢“¥∫ËÕ¬
„ÀȪ√÷°…“√È“π¢“¬‡§√◊ËÕ߇ ’¬ß√∂¬πµÏ JVC
ë À“°‡ ’¬ß¡’ª—≠À“...
™ÿ¥ª√–°Õ∫™ÿ¥π’È¡’‡§√◊ËÕß°√Õ߇ ’¬ß„π«ß®√°”≈—ß (Power Circuit)
լ˓߉√°Á¥’„π√∂¬πµ ∫“ߧ—π°ÁÕ“®‡°‘¥‡ ’¬ß∑’Ë ‰¡Ëæ÷ߪ√“√∂π“¢÷Èπ‰¥È
À“°ª—≠À“π’ȇ°‘¥¢÷Èπ „ÀȵËÕ¢—È« “¬¥‘π¥È“πÀ≈—ߢÕß™ÿ¥ª√–°Õ∫
(¥Ÿ·ºπ¿Ÿ¡°‘ “√µËÕ‡™◊ÕË ¡) ‡¢È“°—
∫‡™ ´‘ ¢Õß√∂¬πµÏ‚¥¬„™È “¬‡§‡∫‘≈∑’Ë —Èπ·≈–Àπ“°«Ë“ ‡™Ëπ
“¬‰ø‡§√◊ËÕß«—¥À√◊Õ “¬ª√– “π∑Õß·¥ß ‡ªÁπµÈπ À“°¬—ß
¡’‡ ’¬ßÕ¬ŸËÕ’° „ÀȪ√÷°…“√È“π¢“¬‡§√◊ËÕ߇ ’¬ß√∂¬πµÏ JVC
ë °”≈—߉ø‡¢È“ Ÿß ÿ¥¢Õß≈”‚æ߉¡Ë§«√‡°‘π 45 «—µµÏ ”À√—∫≈”‚æßµ—«À≈—ß
·≈– 45 «—µµÏ ”À√—∫ ≈”‚æßµ—«ÀπÈ“ ·≈–¡’§Ë“§«“¡µÈ“π∑“πµËÕ‰øøÈ“
°√–· ≈—∫ 4 ‚ÕÀÏ¡ ∂÷ß 8 ‚ÕÀÏ¡
ë µ√«® Õ∫„ÀÈ¥’«Ë“‰¥ÈµËÕ™ÿ¥ª√–°Õ∫™ÿ¥π’È≈ß„π‡™ ´‘ √∂¬πµÏ·≈È«
ë ·ºËπ√–∫“¬§«“¡√ÈÕπ®–√ÈÕπ¡“°À≈—ß®“°„™È √–¡—¥√–«—ßլ˓‰ª —¡º—
‡¡◊ËÕ∂Õ¥™ÿ¥ª√–°Õ∫π’È
·ºËπ√–∫“¬§«“¡√ÈÕπ
…—«d(« iHš W×OH
InstalKS-FX711_511-Final
2
1/9/02, 3:48 PM
!
√’‚¡µ§Õπ‚∑√≈
bFÐ sŽ rJײ« …bŠË
Battery
·∫µ‡µÕ√’Ë
U¹—UD³«
CR2025
WOzUÐdNJ« öOu²«
¨W?O?zU?Ðd?N?J?« d?z«Ëb?« w?A d?O?B?I?ð ÀËb?Š l?M?*
qLŽ rŁ VU« W¹—UD³« ·dÞ qBHÐ wu½
wA Æ“UN'« VOdð q³ WOzUÐdNJ« öOu²«
qJAÐ “UN'« VOdð WOHOJÐ p²AdF. ÂbŽ WUŠ
hZA “UN'« VOdð WOKLŽ „dð vłd¹ ¨`O×
Æ…eNłô« Ác¼ q¦. VOd² q¼R.Ë h²Z.
∫WEŠö.
—U??O? ð W??D? Ý«u??Ð q??L? F? O? “U??N? '« «c??¼ r?L? b?I?
WOzUÐdN WLE½« ¨XuA ±≤ ¨ DC dýU³. wzUÐdN
«c?¼ q?¦?. œu?łË Âb?Ž W?U?Š wA ÆV?U?Ý i?¹—Q?ð
‰u??×? . «b??Z?²?Ý« V?−?¹ ¨p?ð—U?O?Ý w?A ÂU?E?M?«
…eNłô« ¡öË s. ‰u;« «c¼ ¡«dý sJ1Ë ¨ÃU²uA
ÆJVC W—U. «—UOK WOðuB«
UÝUOI« fH½ qL×¹ dšPÐ “uOH« ‰b³²Ý« •
v?łd?¹ ¨“u?O?H?« ‚«d?²?Š« —d?J?ð «–« ÆW?Auu*«
«—U?OK WOðuB« …eNłô« ¡öË …—UA²Ý«
ÆJVC W—U.
ÆÆÆWKJA*« u¼ ZO−C« ÊU «–« •
…dz«œ qš«œ ZO−{ d²KA “UN'« «c¼ ÂbZ²¹
i?? F? ?Ð w?? A ¨p?? – l?? . ÆW?? O? ?zU?? Ðd?? N? ?J? ?« W??U??D? «
WIDID« s. Ÿu½ Àb×¹ Ê« sJ1 ¨ «—UO«
q¦. ÀËbŠ WUŠ wA Æ»užd*« dOž ZO−C« Ë«
WOHKš wA œułu*« i¹—Q²« ·dÞ qË« ¨p–
…—UO« qJO¼ l. ©qOu²« rÝ— dE½«® “UN'«
q¦. ¨pLÝ«Ë dB« „öÝ« «bZ²Ý« WDÝ«uÐ
w?A Æw?ÝU?O?I?. p?KÝ Ë« ‰Ëb:« ”U×M« pKÝ
vłd¹ ¨ZO−C« Ë« WIDID« nuð ÂbŽ WUŠ
«—U?OK WOðuB« …eNłô« ¡öË …—UA²Ý«
ÆJVC W—U.
U?ŽU?L?« q?šb? vB?ô« b?(« Êu?J¹ Ê« V?−?¹ •
◊«Ë ¥µ Ë WO?HK)« U?ŽUL?K ◊«Ë ¥µ s. d?¦«
ÆÂË« ∏ v« ¥ 5Ð WF½U2 l. ¨WO.U.ô« UŽULK
Æ…—UO« qJO¼ l. “UN'« i¹—Qð s. bQð •
bFÐ «bł WMšUÝ …—«d(« iHš W×OH `³Bð •
Ÿe?½ b?MŽ UN².ö. ÂbŽ s. bQð Æ«bZ²Ýô«
Æ“UN'«
ENGLISH
wÐdŽ
‰∑¬
A Typical Connections / !"#$ / °“√‡™◊ËÕ¡µËÕ·∫∫ª°µ‘ / WOł–uLM« öOu²«
Before connecting: Check the wiring in the ! !"#$%&'()*+%,&
vehicle carefully. Incorrect connection may cause !"#$%&'
serious damage to this unit.
1 !"#$%&'()*+,-.%/0
1 Connect the colored leads of the power cord
!"#$%&'()*+,-.
to the car battery, speakers and automatic
antenna (if any) in the following sequence:
1 !"
1 Black: ground
2 !"#$%& 12V
2 Yellow: to car battery (constant 12 V)
3 !"#$%&'()*+,3 Red: to an accessory terminal
4 !"#$%&'()*+,-
4 Blue with white stripe: to automatic
200 antenna (200 mA max.)
5
!"#$%
5 Others: to speakers
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
* Before connecting the CD changer, make sure
that the unit is turned off.
* CD !"#$%&'()*+
* °ËÕπ®–‡™◊ÕË ¡µËÕ‡§√◊ÕË ß‡≈Ëπ´’¥’
Right
´È“¬
—UO«
¢«“
5LO«
!"
#$%&'
!"#$%&'&()*+,
When connecting a CD changer, we recommend to use one of the CH-X series CD changers.
• If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).
You can also use an external component such as a portable MD player by connecting the Line Input Adaptor KS-U57 (not supplied).
(See diagram .)
JVC CD changer or another
external component
JVC CD !"#$%
!
°√ÿ≥“µ√«® Õ∫„ÀÈ·πË„®«Ë“‡§√◊ËÕ߇≈Ëπ´’¥’π—Èπª‘¥Õ¬ŸË
¨CD W−.b*« W½«uDÝô« ‰Òb³. qOuð q³ *
ÒÆ“UN'« qOGAð ·UI¹« s. bQð
Left
2
3
!"#$ ! CH-X CD !
• !CD !KD-MK !"#$ KS-U15K !"#$%&'()*KS-U57 !"#$%&'()*+, -MD
‡∑Ë“π—πÈ ‡§√◊ÕË ß‡≈Ëπ´’¥¢’ Õß JVC
W?? ? ? ½«u?? ? ?D? ? ? Ý« ‰Òb?? ? ? ³? ? ? .
JVC W—U. CD W−.b.
X??½U??½u?³?L? “U?N?ł Ë«
dš« wł—Uš
!"#
„π°“√‡™◊ËÕ¡µËÕ‡§√◊ËÕ߇≈Ëπ´’¥’ ‡√“¢Õ·π–π”„Àȧÿ≥„™È‡§√◊ËÕ߇≈Ëπ´’¥’√ÿËπ„¥√ÿËπÀπ÷Ëß„πµ√–°Ÿ≈ CH-X
• À“°‡§√◊ËÕ߇≈Ëπ´’¥’¢Õߧÿ≥‡ªÁπ√ÿËπ∑’ËÕ¬ŸË„πµ√–°Ÿ≈ KD-MK §ÿ≥µÈÕß„™È “¬‡æ‘¡Ë ‡µ‘¡ (KS-U15K)
§ÿ≥ “¡“√∂„™ÈÕÿª°√≥Ï¿“¬πÕ°‡™Ëπ‡§√◊ËÕ߇≈Ëπ‡ÕÁ¡¥’·∫∫æ°æ“‰¥È ‚¥¬π”¡“‡™◊ËÕ¡µËÕ°—∫Õ·¥ª‡µÕ√Ï “¬ —≠≠“≥‡¢È“ KS-U57 (‰¡Ë ‰¥È„ÀÈ¡“¥È«¬) (¥Ÿ·ºπ¿Ÿ¡‘
)
ÆCH-X WKKÝ s. CD W−.b*« U½«uDÝô« ôb³. bŠ« qOu²Ð wu½
Æ©KS-U15K® wAU{« pKÝ v« ÃU²% ·uÝ ¨KD-MK WKKÝ s. WJK²9 Íc« CD W−.b*« U½«uDÝô« ‰bÒ³. ÊU «–« •
l. œÒËe. dOž® KS-U15K j)« qšœ ¡v¹UN. qOu²Ð p–Ë p¹œ wMO*« MD W½«uDÝ« ‰Òb³. q¦. wł—Uš X½U½u³L “UNł ‰ULF²Ý« UC¹« pMJ1
©Æ wDODZ²« rÝd« dD½«® ©“UN'« «c¼
Line out
(see diagram )
!
! Rear ground terminal
!"#$%
“¬ÕÕ° (Line out)
(¥Ÿ·ºπ¿Ÿ¡‘ )
j)« Ãdš
( jD<« dE½«)
15 A fuse
15A ’¥”
œuÝ√
3
2
µËÕ°—∫ “¬Õ“°“»
wz«uN« v«
1
±¿
µËÕ°—∫‚§√ß‚≈À–À√◊Õ‡™ ´‘ ¢Õß√∂¬πµÏ
w½bF*« …—UO« qJO¼ Ë« w½bF*« r'« v«
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition swich)
!"#$%&'()*+ !"#$,-./012
!"#$%&'
2
dH√
1
µËÕ°—∫¢—È«∑’Ë¡’°√–· ‰øøÈ“„π·ºßø‘« Ï ´÷ËßµËÕ°—∫·∫µ‡µÕ√’Ë√∂¬πµÏ (‚¥¬‰¡ËµÈÕß„™È «‘∑™Ï®ÿ¥√–‡∫‘¥)
«—Ëd.® W¹—UD³« l. Wuu*« “uOH« WŽuL−. wA w(« ·dD« v«
©‰UF²ýô« ÕU²H0
Red
*1: Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
*1: !"#$%&'()*+,-.$/01234
!"#$%&'()
’·¥ß
dLŠ√
To an accessory terminal in the fuse block
!"#$%&'()*
3
µËÕ°—∫¢—«È Ë«πª√–°Õ∫„π·ºßø‘« “uOH« WŽuL−. wA wAU{ô« ·dD« v«
Blue with white stripe
!"#$
*1: °ËÕπ°“√µ√«® Õ∫°“√∑”ß“π¢Õß™ÿ¥ª√–°Õ∫π’°È ÕË π∑’®Ë –µ‘¥µ—ßÈ µÈÕßµËÕ “¬µ–°—«Ë π’°È ÕË π ¡‘©–
π—Èπ®–‰¡Ë “¡“√∂‡ª‘¥‡§√◊ËÕ߉¥È
V−¹ ¨VOd²« q³ “UN'« «c¼ qOGAð h×A q³ ∫ ±*
*
*
To metallic body or chassis of the car
!"#$%&'
Yellow*1
*1
’‡À≈◊Õß*1
To antenna
!
«‘∑™Ï®ÿ¥√–‡∫‘¥
‰UF²ýô« ÕU²H.
‰¡Ë ‰¥È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’È
Æ“UN'« «c¼ l. œÒËe. dOž
Black
ø‘« Ï¢π“¥ 15 A
dO³.« ±µ “uOA
Ignition switch
!
Not included with this unit.
!"#$%
*
®ÿ¥‡™◊ËÕ¡µËÕ “¬¥‘π¥È“πÀ≈—ß
wHK)« i¹—Q²« ·dÞ
15
Antenna terminal
!
¢—«È “¬Õ“°“»
wz«uN« ·dÞ
°ËÕπ∑”°“√‡™◊ËÕ¡µËÕ : µ√«® Õ∫°“√‡¥‘𠓬‰ø„π√∂¬πµÏլ˓ß√–¡—¥√– „ö?Ýô« W?J³ý s. bQð ∫q?O?u²UÐ ¡b³« q³
WOKLŽ wA QDš Àb×¹ ô v²Š WbÐ …—UO« wA
«—ß Õ¬Ë“„ÀȺ‘¥æ≈“¥„π°“√‡™◊ËÕ¡µËÕ™ÿ¥ª√–°Õ∫™ÿ¥π’È
q?? O? ?u?? ²? « V??³? ? ¹ Ê« s??J? 1 Æ“U??N? '« q??O? u??ð
°“√‡™◊ËÕ¡µËÕº‘¥æ≈“¥Õ“®∑”„Àȇ°‘¥§«“¡‡ ’¬À“¬√È“¬·√ß°—∫™ÿ¥ª√–
Æ“UN−K wIOIŠ qDŽ ‰uBŠ v« ¡vÞU)«
°Õ∫π’È ‰¥È
W?U?D?« b?¹Ëe?ð p?K? W½uK*« „öÝô« qË« ±
1 ‡™◊ËÕ¡µËÕ “¬µ–°—Ë« ’µË“ß Ê ¢Õß “¬‡§‡∫‘≈°”≈—ß (Power Cord) UŽUL« ¨…—UO« W¹—UDÐ l. WOzUÐdNJ«
V??? Š ©b??łË Ê«® w??J? O? ðU??.u??ðËô« w?z«u?N?«Ë
‡¢È“°—∫·∫µ‡µÕ√’Ë ≈”‚æß ·≈– “¬Õ“°“» Õ—µ‚π¡—µ‘„π√∂¬πµÏ
ÆwU²« qK²«
(∂È“¡’) µ“¡≈”¥—∫µËÕ‰ªπ’È
q?? J? ?O? ?¼ l?? .® ÷—ô« l?? . ∫œu?? Ýô« p?? K? ? « ±
1 ’¥” : “¬¥‘π
©…—UO«
2 ’‡À≈◊Õß : µËÕ°—∫·∫µ‡µÕ√’Ë√∂¬πµÏ (12 ‚«≈∑ϧß∑’)Ë
XÐUŁ® …—UO« W¹—UDÐ l. ∫dHô« pK« ≤
©XuA ±≤
3 ’·¥ß : µËÕ°—∫¢—«È Ë«πª√–°Õ∫
wAU{ô« ·dD« l. ∫dLŠô« pK« ≥
4 ’π”È ‡ß‘π≈“¬¢“« : µËÕ°—∫ “¬Õ“°“»Õ—µ‚π¡—µ‘ (¢π“¥ Ÿß ÿ¥
200 mA)
wz«uN« l. ∫iOÐôUÐ jD<« ‚—“ô« pK« ¥
©dO³.« wKKO. ≤∞∞ vBô« b(«® wJOðU.uðËô«
5 ’Õ◊Ëπ Ê : µËÕ°—∫≈”‚æß
UŽUL« l. ∫Èdšô« „öÝô« µ
2 ‡™◊ËÕ¡µËÕ°—∫ “¬Õ“°“»
Æwz«uN« pKÝ qË« ≤
3 ÿ¥∑È“¬ µËÕ Ë«π§«∫§ÿ¡°“√‡¥‘𠓬‰ø‡¢È“°—∫™ÿ¥ª√–°Õ∫™ÿ¥π’È
Æ“UN'« l. „öÝô« q.UŠ qË« ¨«dOš« ≥
’πÈ”‡ß‘π≈“¬¢“«
iOÐôUÐ jDZ. ‚—“« pKÝ
·ºßø‘« Ï
“uOH« WŽuL−.
To automatic antenna if any
!"#$%
4
“U?N?'« q?O?G?A?ð s?J?1 ô Y?O?Š ¨p?K« «c¼ qOuð
ÆpK« qOuð ÊËbÐ
k
Fuse block
!"
µËÕ°—∫ “¬Õ“°“»Õ—µ‚π¡—µ‘ (∂È“¡’)
błË Ê« wJOðU.uðËô« wz«uN« v«
5
White with black stripe
!"#$
White
Gray with black stripe
!"#$
Gray
Green with black stripe
!"#$
Green
Purple with black stripe
!"#$
Purple
’¢“«·∂∫¥”
jDZ. iOЫ pKÝ
œuÝôUÐ
’¢“«
iOÐ√
’‡∑“·∂∫¥”
œuÝôUÐ jDZ. ÍœU.—
’‡∑“
ÍœU.—
’‡¢’¬«·∂∫¥”
œuÝôUÐ jDZ. dCš√
’‡¢’¬«
dCš«
’¡«Ë ß·∂∫¥”
œuÝôUÐ jDZ. w½«uł—«
’¡«Ë ß
w½«uł—«
Left speaker (front)
! !
Right speaker (front)
! !
Left speaker (rear)
! !
Right speaker (rear)
! !
≈”‚æß´È“¬ (ÀπÈ“)
©WO.U.ô«® ÈdO« WŽUL«
≈”‚æߢ«“ (ÀπÈ“)
©WO.U.ô«® vMLO« WŽUL«
≈”‚æß´È“¬ (À≈—ß)
©WOHK)«® ÈdO« WŽUL«
≈”‚æߢ«“ (À≈—ß)
©WOHK)«® vMLO« WŽUL«
PRECAUTIONS on power supply and
speaker connections:
• DO NOT connect the speaker leads of the power
cord to the car battery; otherwise, the unit will be
seriously damaged.
• Connect the black lead (ground), yellow lead (to car
battery, constant 12 V), and red lead (to an accessory
terminal) correctly.
• BEFORE connecting the speaker leads of the power cord
to the speakers, check the speaker wiring in your car.
– If the speaker wiring in your car is as illustrated
in Fig. 1 and Fig. 2 below, DO NOT connect the unit
using that original speaker wiring. If you do, the unit
will be seriously damaged.
Redo the speaker wiring so that you can connect the
unit to the speakers as illustrated in Fig. 3.
– If the speaker wiring in your car is as illustrated
in Fig. 3, you can connect the unit using the original
speaker wiring in your car.
– If you are not sure of the speaker wiring of your car,
consult your car dealer.
+
L -
+
R -
!"#$%&'()*
+
R -
+
-
Fig. 2
3
¢ÈÕ§«√√–«—ß ”À√—∫°“√µËÕ·À≈Ë߮˓¬°”≈—ß·≈–≈”‚æß:
• !"#$%&'&()*+,-./01 • լ˓µËÕ “¬µ–°—Ë«‡§‡∫‘≈°”≈—ߢÕß≈”‚æ߇¢È“°—∫·∫µ‡µÕ√’Ë√∂¬πµÏ
¡‘©–π—Èπ™ÿ¥ª√–°Õ∫®–‰¥È√—∫§«“¡‡ ’¬À“¬¡“°
!"
• µËÕ “¬µ–°—Ë«·µË≈– ’ „ÀÈ∂Ÿ°µÈÕß : ’¥” ( “¬¥‘π), ’‡À≈◊Õß (‡¢È“°—
• !"#$%&"' ! !"#
∫·∫µ‡µÕ√’Ë√∂¬πµÏ „ÀÈ¡’°”≈—ߧß∑’Ë 12 ‚«≈∑Ï) ·≈– ’·¥ß
!"#$%&12V !"#$
(‡¢È“°—∫¢—«È Ë«πª√–°Õ∫)
!"#$%&'()
• °ËÕπ∑’®Ë –µËÕ “¬µ–°—Ë«‡§‡∫‘≈°”≈—ߢÕß≈”‚æ߇¢È“°—∫≈”‚æß
„Àȵ√«® Õ∫°“√‡¥‘𠓬‰ø≈”‚æß„π√∂¢Õߧÿ≥„Àȇ√’¬∫√ÈÕ¬‡ ’¬°ËÕπ
• !"#$%&%' !"()*+,-.
–
À“°°“√‡¥‘𠓬‰ø≈”‚æß„π√∂¢Õߧÿ≥‡ªÁπ‡À¡◊Õπ„π√Ÿª¿“æ∑’Ë 1
!"#$%&
·≈–√Ÿª¿“æ∑’Ë 2 ¥—ߢȓß≈Ë“ßπ’È
– !"#$%&'()* 1 2 լ˓µËÕ™ÿ¥ª√–°Õ∫∑’Ë„™È°“√‡¥‘𠓬‰ø≈”‚æß·∫∫¥—È߇¥‘¡π—Èπ
!"#$%&'()*+, !-./
¡‘©–π—Èπ™ÿ¥ª√–°Õ∫®–‰¥È√—∫§«“¡‡ ’¬À“¬¡“°
!"#$ %&'()*+,-./0
„ÀÈ®—¥°“√‡¥‘𠓬‰ø≈”‚æß„À¡Ë ‡æ◊ËÕ§ÿ≥®– “¡“√∂µËÕ™ÿ¥ª√–
3 !"#$%&'()*+
°Õ∫‡¢È“°—∫≈”‚æßµ“¡√Ÿª¿“æ∑’Ë 3 ‰¥È
– !"#$%&'()*3 !
– À“°°“√‡¥‘𠓬‰ø≈”‚æß„π√∂¢Õߧÿ≥‡ªÁπ‡À¡◊Õπ„π√Ÿª¿“æ∑’Ë 3
§ÿ≥ “¡“√∂µËÕ™ÿ¥ª√–
!"#$%&'()*+,
°Õ∫∑’Ë„™È°“√‡¥‘𠓬‰ø≈”‚æß·∫∫¥—È߇¥‘¡„π√∂¢Õߧÿ≥‰¥È‡≈¬
– !"#$ %&'()*+,-./
–
À“°§ÿ≥‰¡Ë·πË„®«Ë“°“√‡¥‘𠓬‰ø≈”‚æß„π√∂¢Õߧÿ≥‡ªÁπ·∫∫„¥
!"#$%&
„ÀȪ√÷°…“ºŸÈ¢“¬√∂¬πµÏ¢Õߧÿ≥
+
L -
+
-
Fig. 1
InstalKS-FX711_511-Final
+
-
+
-
+
L -
+
R -
+
-
+
-
Fig. 3
1/9/02, 3:49 PM
W?? ?U?? ?D? ? « b??¹Ëe??ð ‰u??Š U??N? ?O? ?³? ?M? ?ð
∫ UŽUL« qOuðË WOzUÐdNJ«
l?. U?ŽU?L??« W?U?Þ b?¹Ëe?ð „ö?Ý« q?Òu?ð ô •
‰u?B?Š v?« ÍœR?¹ p?– Êô ¨…—U?O?« W¹—UDÐ
Æ UŽULK —d{
dHô« pK«Ë ¨©w{—ô«® œuÝô« pK« qË« •
pK«Ë ¨©XuA ±≤ XÐUŁ ¨…—UO« W¹—UDÐ l.®
Æ`O× qJAÐ ©wAU{ô« ·dD« l.® dLŠô«
l. UŽUL« WUÞ b¹Ëeð „öÝ« qOuð q³ •
U?ŽU?L??« „ö?Ý« W?J?³?ý h?×A« ¨ UŽUL«
Æpð—UOÝ qš«œ
q???š«œ U??ŽU??L????« „ö??Ý« W??J??³??ý X??½U?? «–« ≠
± q?? ?J? ? A? ? « w?? ?A W?? ?M? ? O? ?³? ?. w??¼ U??L? ? p??ð—U??O? ?Ý
q?Òu??ð ô ¨q??H? ?Ýô« w??A …œu?łu?*« ≤ q?J?A?«Ë
„ö?? Ý« W??J? ³? ý «b??Z? ²? Ý« W??D? Ý«u??Ð “U??N? '«
“U??N? '« q?O?u?ð - «–« ÆW?O?K?ô« U?ŽU?L??«
‰u??B? Š v??« p??– ÍœR??O? Ý ¨W??I? ¹d??D?« Ác?N?Ð
U??ŽU??L? ? « „ö??Ý« W??J? ³?ý q?L?Ž b?Ž« Æ—d?{
UŽUL« l. “UN'« qOuð pMJ1 YO×Ð
Æ≥ qJA« wA sÒO³. u¼ UL
q?? ?š«œ U??ŽU??L? ?? ?« „ö??Ý« W??J? ?³? ?ý X??½U?? «–« ≠
pMJ1 ¨≥ qJA« wA WMO³. w¼ UL pð—UOÝ
W??J? ³? ý «b??Z? ²?Ý« W?D?Ý«u?Ð “U?N?'« q?O?u?ð
Æpð—UOÝ qš«œ WOKô« UŽUL« „öÝ«
„ö?? Ý« W?? J? ?³? ?A? ?Ð p?? ²? ?Ad?? F? ?. Âb?? Ž W??U??Š w??A ≠
Ë« qOu« dA²Ý« ¨pð—UOÝ qš«œ UŽUL«
Æ’uB)« «cNÐ …d³)« ÍË–
Connecting the leads / !"#
/ µËÕ “¬µ–°—Ë« / „öÝô« qOuð
CAUTION / / ¢ÈÕ§«√√–«—ß / tO³Mð:
• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating
tape.
• !"#$%&'()*+,-.'!/0123
• °“√ªÈÕß°—π°“√≈—¥«ß®√ ®–µÈÕßæ—π¢—È« “¬µ–°—Ë«∑’Ë ‰¡Ë „™È·≈È«¥È«¬‡∑ªæ—𠓬‰ø (Insulating tape)
v?K?Ž o?ôË ‰“U?Ž j?¹d?ý l?{ ¨W?O?zU?Ðd?N?J?« ‡?‡ d?z«Ëb?« w?A d?O?BI²« lM. qł« s. •
Twist the core wires when connecting.
!"#$%&'(
∫‘¥‡ Èπ≈«¥·°π‡æ◊ËÕ‡™◊ËÕ¡µËÕ
ÆqOu²« q³ `O× qJAÐ „öÝô« ÂdЫ
Solder the core wires to connect them securely.
!"#$%&'()
ÆWKLF²*« dOž „öÝô« ·«dÞ«
‡™◊ËÕ¡∫—¥°√’‡ Èπ≈«¥·°π∑—ÈßÀ¡¥‡¢È“¥È«¬°—π ‡æ◊ËÕ§«“¡ª≈Õ¥¿—¬„π°“√„™Èß“π
b?? ?F? ? Ð r?? ?J? ? ×? ?.Ë `?? O? ?×? ? q?? J? ?A? ?Ð „ö?? Ýô« r?? («
ÆqOu²«
B Connections Adding Other Equipment / !"#$%&'( / °“√µËÕ‡æ‘Ë¡‡µ‘¡‡¢È“°—∫Õÿª°√≥ÏÕ◊Ëπ Ê / WOAU{ô« Èdšô« …eNłô« qOuð
Amplifier / !" / ‡§√◊ËÕߢ¬“¬ / uB« rZC.
You can connect an amplifier and other
equipment to upgrade your car stereo system.
• Connect the remote lead (blue with white
stripe) to the remote lead of the other
equipment so that it can be controlled through
this unit.
For amplifier only:
– Connect this unit’s line-out terminals to the
amplifier’s line-in terminals.
– Disconnect the speakers from this unit,
connect them to the amplifier. Leave the
speaker leads of this unit unused. (Cover
the terminals of these unused leads with
insulating tape, as illustrated above.)
!"#$%&'()* +,-./0
!"#
• ! !"# !"#$%&'(
!"#$"%&'()*+, !"#$%
– !"#$%&'()"*$%+,
– !"#$%&'()*+,!-#
!"#$%&'() !"#$
!"#$%&'"()*+,-.
Rear speakers
!"
≈”‚æßÀ≈—ß
WOHK)« UŽUL«
L
INPUT
L
R
R
JVC Amplifier
JVC ‡§√◊ËÕߢ¬“¬‡ ’¬ß JVC
JVC
W—U . u rZ C .
§ÿ≥ “¡“√∂µËÕ‡§√◊ËÕߢ¬“¬·≈–Õÿª°√≥ÏÕ◊Ëπ Ê ‡æ◊ËÕ՗懰√¥√–
∫∫‡§√◊ËÕ߇ ’¬ß„π√∂¬πµÏ¢Õߧÿ≥‰¥È
• µËÕ “¬µ–°—Ë«√–¬–‰°≈ ( ’πÈ”‡ß‘π≈“¬¢“«) ‡¢È“°—∫ “¬µ–°—Ë«√–¬–
‰°≈¢ÕßÕÿª°√≥ÏÕ◊Ëπ Ê ‡æ◊ËÕ®– “¡“√∂§«∫§ÿ¡‚¥¬™ÿ¥ª√–°Õ∫π’È ‰¥È
”À√—∫‡§√◊ËÕߢ¬“¬‡∑Ë“π—Èπ :
– µËÕ¢—È« “¬ÕÕ° (Line-out) ¢Õß™ÿ¥ª√–°Õ∫π’‡È ¢È“°—∫¢—«È “¬‡¢È“
(Line-in) ¢Õ߇§√◊Õ
Ë ß¢¬“¬
– ∂Õ¥≈”‚æßÕÕ°®“°™ÿ¥ª√–°Õ∫π’È ·≈È«µËÕ‡¢È“°—∫‡§√◊ËÕߢ¬“¬
∑‘Èß “¬µ–°—Ë«≈”‚æߢÕß™ÿ¥ª√–°Õ∫π’È ‰«È
(æ—π¢—È«¢Õß “¬µ–°—Ë«∑’Ë ‰¡Ë ‰¥È „™È‡À≈Ë“π’È „ÀÈ√Õ∫¥È«¬‡∑ªæ—
𠓬‰ø ¥—ßµ—«Õ¬Ë“ߢȓߵÈπ)
5ײ dš« “UNłË u rZC. qOuð pMJ1
Æ…—UO« u¹dO²Ý “UNł ¡«œ«
j??D? <« ‚—“ô«® b??F? Ð s??Ž r??J? ×? ²? « p??K? Ý q?Ë« •
dšô« “UN−K bFÐ sŽ rJײ« pKÝ l. ©iOÐôUÐ
Æ“UN'« «c¼ ‰öš s. “UN'UÐ rJײ« r²¹ YO×Ð
∫ uB« rZC* jIA
·«dÞ« l. “UN'« «cN j)« ‡ Ãdš ·«dÞ« qË« ‡‡
Æ uB« rZC* j)« ‡ qšœ
l?. r?N?KË« ¨“UN'« «c¼ s. UŽUL« qBA« ‡‡
«c??¼ U?ŽU?L?Ý „ö?Ý« „d?ð« Æ u?B?« r?Z?C?.
wDž® ƉULF²Ý« ÊËbÐ “UN'«
j?¹d?A?Ð W?K?L?F?²*« dOž „öÝô« Ác¼ ·«dÞ«
©ÆvKŽô« wA `{u. u¼ UL ¨‰“UŽ
Remote lead
!"
Y-connector (not supplied with this unit)
Y !" !"#$%
“¬µ–°—«Ë √–¬–‰°≈
bFÐ sŽ rJײ« pKÝ
¢ÈÕµËÕ√Ÿªµ—« Y (‰¡Ë ‰¥È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’)È
Ò
©“UN'« l. œÒËe. dOž® Y qu.
Blue with white stripe
!"#$
’πÈ”‡ß‘π≈“¬¢“«
iOÐôUÐ jD<« ‚—“ô«
To power aerial if any
!"#$%&'(
Signal cord (not supplied with this unit)
! !"#$%
µËÕ‡¢È“°—∫‡ “Õ“°“»‰øøÈ“À“°¡’
błË «–« wz«uN« WUÞ v«
“¬‡§‡∫‘≈ —≠≠“≥ (‰¡Ë ‰¥È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’)È
©“UN'« l. œÒËe. dOž® œdH. pKÝ
LINE OUT
L
L
R
* Firmly attach the ground wire to the metallic body or to the chassis of the car-to the place not coated
with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause
damage to this unit.
* !"#$%&'($)*+,-./-.0123456789 !"#$%&'()*+
!"#$% !"#$%&'()*+,
KS-FX711
KS-FX511
REAR
R
Front speakers
!"
*
µËÕ≈«¥ “¬¥‘π„ÀÈ·πËπ‡¢È“°—∫µ—«∂—߇À≈Á° À√◊Õµ—«∂—ß√∂ - µ√ß Ë«π∑’Ë ‰¡Ë¡’ ’‡§≈◊Õ∫ (À“°¡’ ’‡§≈◊Õ∫Õ¬ŸË„ÀÈ¢Ÿ¥ ’ÕÕ° °ËÕπµËÕ≈«¥ “¬¥‘π)
À“°‰¡ËªØ‘∫—µ‘µ“¡§”·π–π” ‡§√◊ËÕßÕ“®‡ ’¬À“¬‰¥È
dOž l{u*« l. ‡‡ w½bF*« …—UO« rł Ë« qJO¼ l. rJ×. qJAÐ w{—ô« pK« qË« *
w?A Æ©p?K« qOuð q³ ÊU¼b« ‰“« ¨ÊU¼bUÐ wKD. l{u*« ÊU «–«® ÊU¼bUÐ wKD*«
Æ“UN'« «cN —d{ p– V³¹ Ê« sJ1 ÊU¼b« W«“« ÊËœ qJON« l. pK« qOuð WUŠ
≈”‚æßÀπÈ“
WO.U.ô« UŽUL«
External component / ! / Õÿª°√≥Ï¿“¬πÕ° / wł—U)« X½U½u³LJ« “UNł
L
L
L
L
R
R
R
R
LINE OUT
L
REAR
KS-FX711
KS-FX511
R
Line Input Adaptor KS-U57 (not supplied with this unit)
!"# KS-U57 !"#$%
Signal cord (not supplied with this unit)
! !"#$%
Õ·¥ª‡µÕ√Ï “¬ —≠≠“≥‡¢È“ KS-U57 (‰¡Ë ‰¥È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’È)
©“UN'« «c¼ l. œÒËe. dOž® KS-U57 j)« qšœ ¡v¹UN.
“¬ —≠≠“≥ (‰¡Ë ‰¥È„ÀÈ¡“°—∫™ÿ¥ª√–°Õ∫π’È)
©“UN'« «c¼ l. œÒËe. dOž® …—Uýô« pKÝ
CD changer jack
CD !"
External component
!
Õÿª°√≥Ï¿“¬πÕ°
wł—U)« X½U½u³LJ« “UNł
™ËÕ߇ ’¬∫µËÕ¢Õ߇§√◊ËÕ߇≈Ëπ´’¥’
W−.b*« W½«uDÝô« ‰Òb³. f³I. CD
!
TROUBLESHOOTING
• The fuse blows.
* Are the red and black leads connected correctly?
• Power cannot be turned on.
* Is the yellow lead connected?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded
in common?
• Unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded
in common?
InstalKS-FX711_511-Final
4
• * * •
*
•
*
•
*
•
*
*
!"#
!"#$%&'!"#$%()*$+ ?
!"#$
!"#$%&'$ ?
!"#$
!"#$%&'()*+ ?
!"
!"#$%&'() ?
!"#$ LR !"– ?
!"
!"#$%&'() ?
!"#$ LR !"– ?
°“√µ√«® Õ∫ª—≠À“¢—¥¢ÈÕß
•
*
•
*
•
*
•
*
*
•
*
*
ø‘« Ï¢“¥
¡’°“√‡™◊ËÕ¡ “¬µ–°—Ë« ’¥”·≈– ’·¥ßլ˓ß∂Ÿ°µÈÕßÀ√◊Õ‰¡Ë
‰¡Ë “¡“√∂‡ª‘¥‡§√◊ËÕ߉¥È
¡’°“√‡™◊ËÕ¡ “¬µ–°—Ë« ’‡À≈◊ÕßÀ√◊Õ‰¡Ë
‰¡Ë¡‡’ ’¬ßÕÕ°®“°≈”‚æß
“¬µ–°—Ë« Ë«π∑’ËÕÕ°∑“ß≈”‚æ߇°‘¥‰øøÈ“≈—¥«ß®√À√◊Õ‰¡Ë
‡ ’¬ß‡æ’Ȭπ
“¬µ–°—Ë« Ë«π∑’ËÕÕ°∑“ß≈”‚æßµËÕ≈ߥ‘πÀ√◊Õ‰¡Ë
“¬¢—È«≈∫ ¢Õß≈”‚æߥȓπ´È“¬·≈–¢«“µËÕ≈ߥ‘πµ“¡ª°µ‘À√◊Õ‰¡Ë
™ÿ¥ª√–°Õ∫√ÈÕπ¢÷Èπ
“¬µ–°—«Ë ∑’ÕË Õ°∑“ß≈”‚æßµËÕ≈ߥ‘πÀ√◊Õ‰¡Ë
“¬¢—È«≈∫ ¢Õß≈”‚æߥȓπ´È“¬·≈–¢«“µËÕ≈ߥ‘πµ“¡ª°µ‘À√◊Õ‰¡Ë
1/9/02, 3:49 PM
Õöô«Ë ‰UDŽô« sŽ Y׳«
Æ“uOH« ‚d²×¹
q?J?A?Ð W?u?u?. œu?Ýô«Ë d?L?Šô« p?K??« q?¼
ø`O×
ÆWOzUÐdNJ« WUD« qOuð sJ1 ô
øôuu. dHô« pK« q¼
Æ UŽUL« s. u —bB¹ ô
Ãd?? š p?? K? ?Ý …d?? z«œ w?? A d?? O? B? I? ð p??U??M? ¼ q??¼
øWŽUL«
ÆÁuA. uB«
ø÷—ôUÐ ôuu. WŽUL« Ãdš pKÝ q¼
L ÈdO« WŽULK å≠ò W³U« ·«dÞô« q¼
øiFÐ l. ÷—ôUÐ Wuu. R vMLO«Ë
Æ“UN'« sZ¹
ø÷—ôUÐ ôuu. WŽUL« Ãdš pKÝ q¼
L ÈdO« WŽULK å≠ò W³U« ·«dÞô« q¼
øiFÐ l. ÷—ôUÐ Wuu. R vMLO«Ë
•
*
•
*
•
*
•
*
*
•
*
*