Download Hunter 41953-01 User's Manual

E3
E4
K
M
Connect wiring harness. DO NOT ALLOW THE FIXTURE TO
HANG FROM THE WIRING HARNESS.
Position the strain relief bracket between the plugs as
shown, and screw into place.
E5
E6
M
M
N
Align posts A, B, C and D (stamped into motor housing)
with posts A, B, C and D (stamped into light fixture).
Slide light fixture over posts.
Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
E8
E7
O
Align glass dome and push up.
Install 2 Max 60 Watt A15 bulbs (Not Included).
18
41953-01 02/15/2008
023_41953_EngS_2-15-08.indd 18
2/16/08 12:25:46 PM