Download Hunter Engineering Quick Check System Brochure

Hunter Quick Check System
™
L441/ L444 Four-Post Lift
Two-Minute Inspection Process
NEW!
connection
tire pressure
Quick Check ™ inspection process identifies repair
ng
Comi
Soon!
Quick Tread
drive over tire tread
™
battery
tester
✔ Automatically measures tread depth
tire tread
battery
tester
brakes
tire tread
✔ No time loss
Stopping Check
battery tester
milage
starting/
charging system
oil change
alignment
brakes
tire tread
VIN
customer data
underhood
alignment
data
connection
brakes
✔ Wheels tested individually
printer
vehicle
condition
tire pressure
data
connection
✔ Tests brake force at each wheel
and overall vehicle deceleration
alignment
shocks
HVAC
camera
TPMS
tire pressure
X
Tire Pressure
Handheld Tread
X
Diagnostic Check
XXXXXX
XX
data
connection
lights
tire data
stop
tire pressure
filter
brake
measurements
bar code reader
suspension
fluids
quick check
console
✔ Retrieves emission system codes
alignment 2
✔ Wirelessly transfers important
vehicle information to console
✔ Automatically adjusts air pressure
to user-entered OEM spec
✔ Records before and after pressures
Vehicle OE warranty policies vary, please consult OE guidelines when establishing vehicle inspection policies.
✔ Quick and easy
✔ Alternative to dri
opportunities in
1:58
battery
tester
tire tread
battery
tester
brakes
tire tread
alignment
Depth
Wheel Alignment
Battery Health
battery
tester
brakes
data
connection
tire tread
alignment
tire pressure
brakes
tire wear check
data
connection
ive over tread depth
tire pressure
✔ Fast verification of alignment need
✔ Tests battery to OEM specs
✔ Boost traffic to most profitable
undercar service
✔ Sends results to console
wirelessly in 10 seconds
alignment
data
connection
Test performed using drive over tread depth unit.
brakes
Wheel Alignment
nment
Hunter’s patented alignment check system is the quickest way to measure alignment angles that affect
tire life. The test takes less than a minute to produce total toe and camber measurements for both axles.
Results are displayed on the customer printout in easy-to-understand, color-coded graphics.
✔ Check every vehicle that enters shop
✔ Fastest way to check tire wear angles
data
ection
✔ Doesn’t tie up alignment bay
✔ Available in several configurations
to accommodate shop needs
✔ Gain more repair authorizations
with clear, informative printouts
essure
Barcode Reader
✔ Enter vehicle into system
✔ Recall OE specs
Drive-thru configuration
Wheel alignment check features proven HawkEye Elite® technology
✔ Fast setups
✔ High-resolution
cameras
✔ Adjusts easily to
various wheel sizes
✔ Dedicated camera
for each wheel
✔ No metal-to-metal
contact
✔ Pinpoint accuracy
✔ No knob twisting
✔ Compensate
sensors and capture
measurements with
one forward roll
✔ Lightweight
✔ Durable
✔ Low-maintenance
QuickGrip adaptors
™
Wheel alignment check requires a Quick Check console.
HawkEye Elite® cameras
0:58
Choose from several configurations to best fit your shop
Drive-under configuration*
Mobile, multi-bay configuration
Alignment results your customers will see...
Did you know?
Alignment test printout shows pass/fail results for:
• Front and rear total toe
• Front and rear camber
• General alignment condition
*Shown with optional Monitor Kit (20-2899-1)
tire pressure
Quick Tread ™
0:06
Coming
Soon!
drive over tire tread
Quick Tread™ — Hunter’s drive over tread depth unit — automatically measures the tread depth
of each tire without a time loss. The unit detects tread grooves and reports up to six measurements
per tire. Tread depth results are sent to the console and graphically shown on the customer printout.
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Quick Tread requires a Quick Check console.
Quick Tread™ Results
✔ Up to 6 readings per tire
✔ Displayed on screen
✔ Easy-to-understand printout recommends
replacement when needed
✔ Eliminates trips around the vehicle
✔ Eliminates human error and guesswork
Developing Quality Technology
Featuring Sigmavision’s patented tire measurement technology, Hunter’s
drive over tread depth measurement system is the industry’s fastest and
most accurate. See Sigmavision’s U.S. Patent No. 8625105 to learn more.
Tread depth results your customers will see...
Did you know?
Quick Tread™ printout shows:
• 3D model of customer’s tread
• Tread depth measurements
• General condition of tires
• Easy-to-understand pass/fail results
• Customizable coupon
battery
tester
e tread
0:34
Handheld Tread Depth
In about 30 seconds, Hunter’s patented tread depth gauge provides a quick and
easy assessment of tire conditions. Handheld tread depth can be used as an
alternate to drive over tread depth when space or economy are constraints.
✔ Choose a 1- or 3-point reading per tire
✔ Wireless communication with console
brakes
✔ Measurements displayed on screen as collected
✔ Easy-to-understand printout displays
need for replacement
✔ No need to manually interpret each reading
✔ No need to write down each reading
nment
✔ Special condition alternate to drive over tread depth
Tread depth results your customers will see...
data
ection
essure
Did you know?
Tread depth printout shows pass/fail results for:
• Percentage of tread depth remaining
• Graphic showing tread depth measured
• Tire pressure*
• General condition of tires
Handheld tread depth test requires a Quick Check console.
*With optional Inflation Station.
Diagnostic Check
0:10
HVAC
camera
alignment
TPMS
X
X
Hunter’s CodeLink® for Quick Check™ connects directly to a vehicle OBD-II
XX
XXXemission
X
port to retrieve important information concerning
control components
XX
and vehicle identification number (VIN) in approximately 10 seconds.
data
connection
lights
tire data
stop
✔ Automatically retrieves VIN
✔ Detects check engine light status
✔ Retrieves diagnostic trouble codes
✔ Checks emission monitor status
tire pressure
filter
✔ Allows for entry of mileage and tire pressure
specs into
the system
brake
bar code reader
measurements
✔ Wireless communication with console
✔ Compatible with all OBD-II vehicles
(1996 or newer)
Diagnostic results your customers
will see...
suspension
alignment 2
Did you know?
fluids
quick check
console
CodeLink printout shows pass/fail results for:
• Check engine light status
• Legislative trouble codes present
• General diagnostic system review
CodeLink for Quick Check requires a Quick Check console.
e tread
0:08
Stopping Check
brakes
Hunter’s brake performance tester provides a real-life evaluation of a
vehicle’s stopping capability in seconds! The brake tester measures the timing, force
and balance of the brake system and presents results on an easy-to-understand printout.
Surface-mount system installs easily
on virtually any flat surface*
nment
data
ection
essure
Flush-mount installation is also available**
✔
✔
✔
✔
✔
✔
✔
*Brake performance tester requires a Quick Check console and a minimum of 25 feet of bay space. A minimum of 27 feet of bay space is required if used with Quick Tread.
**Flush-mount not compatible with Quick Tread.
0:10
Inflation Station
integrated tire inflation system
OPTIONAL
✔ Automatically inflate all four tires simultaneously
✔ Save time by eliminating repeated manual pressure checks
✔ Integrated inflation hoses located at each wheel position
✔ Corrected tire pressures recorded on customer’s printout
Brake test results your customers will see…
Did you know?
Brake test printout shows pass/fail results for:
• Front-to-rear brake balance
• Side-to-side brake balance on front and rear axles
• Overall brake system performance
Battery Health
battery
tester
Hunter's battery health test measures a battery’s ability to carry electric current in about
20 seconds! The battery test uses patented technology from Midtronics, the industry leader
in battery management, to give a quick, accurate evaluation of battery performance.
e tread
brakes
nment
data
ection
Hunter’s battery test tool transmits results to the console
wirelessly to be displayed on the customer printout
essure
✔
✔
✔
✔
✔
✔
✔
Battery health tester requires a Quick Check console.
0:20
About Midtronics
Midtronics is a worldwide leader and provider of vehicle
battery testing and management products and services.
Founded in 1984, Midtronics remains singularly focused
on battery management innovation. The company continues
advancing the standard in its industry, supplying customers
with custom battery management solutions that meet
evolving needs, including those related to hybrid, electric
and other new vehicle systems.
Midtronics battery testing technology
integrates seamlessly with Hunter’s
Quick Check™ system to measure,
record and display battery test results
Battery test results your customers will see...
Did you know?
Battery test printout shows pass/fail results for:
• Measured cold-cranking amps (CCA)
• OEM cold-cranking amps
• Voltage
• General battery performance
Customer Printouts
Simplified results for easy communication
Communicate with your customer using:
✔ Easy to understand graphics
✔ Segmented results
✔ Photo of customer’s vehicle*
✔ Itemized inspection detail
✔ Results-based suggestions
*Requires webcam, sold separately.
Technician Printouts
Comprehensive results to assist repairs
Details that matter to a tech:
✔ Measurement details
✔ Legislative codes and descriptions
✔ Alignment adjustment icons
✔ Brake balance
✔ Need for electronic steering system
reset
✔ Before tire pressure measurements
✔ Detailed tread depth measurements
HunterNet™ tools for service writers
HunterNet™ (HunterNetwork.com) provides front-shop personnel with quick, convenient access to a vast collection of
vehicle-specific undercar information to help explain and sell service.
✔ Eliminate confusing technical conversations with
easy-to-understand videos, animations and images
✔ Supplement other counter merchandising tools
✔ Help your customers make informed decisions
✔ Simplify training of service writers
✔ Make more informed pricing estimates
✔ Drive repair authorizations to a new level
Informational Videos
Vehicle Specific Data
Adjustment Demos
Point & Click Inspection
Tools and Kits
…and much more!
Tools for shop managers
Using work management tools,
shop managers can track
Quick Check® statistics and
generate reports.
✔ Breakdown “repair opportunities
found” vs. “repair orders
generated” by the week, month,
year or lifetime
✔ Analyze Quick Check results
and failure rates for specific test
types
✔ Remote access of data available
with an Internet connection
using HunterNet™
Access data from
anywhere with
HunterNet™ and an
Internet connection
Return on investment
Sample Payback Analysis
Vehicles per week = 150
Weekly
Units
Shop
Charge
Weekly
Revenue
Est.
Weekly Failure
Profit
Rate2
Profit
Rate1
13%
+10
$456
13%
+40
=
$364
13%
+40
33%
=
$189
10%
+10
x
50%
=
$455
10%
+8
x
65%
= $2,210
60%
+50
Your Customer's
Acceptance Rate (avg)
40%
Brake Jobs
10
x
$250 =
$2,500
x
52%
= $1,300
New Tires
38
x
$120 =
$4,560
x
10%
=
Mount & Balance
38
x
$15
=
$570
x
64%
New Batteries
5
x
$115 =
$575
x
DTC/Emissions
7
x
$130 =
$910
Wheel Alignments
40
x
$85
$3,400
=
$12,515
$4,974
Equipment
Investment3 $40,000
First Year Additional Profit Summary
Acceptance Rate at Additional
40%
Profit
Equipment Investment
$40,000
New Tires + $9,984
Mount & Balance + $7,987
New Batteries + $7,983
DTC/Emissions + $10,816
Brake Jobs + $25,688
Labor & Materials
$175,843
Additional
Weekly Unit
Opportunity
+198
+832
+832
+208
+166
+1,040
Brake Jobs
New Tires
Mount & Balance
New Batteries
DTC/Emissions
Wheel Alignments
Total
1st year profit
Alignments + $57,460
+$25,688
+$9,984
+$7,987
+$7,893
+$10,816
+$57,460
$119,828
(Less Investment):
$79,828
10 year profit:
$1,158,288
Alternative Payback at Different Acceptance Rates
30%
35%
40%
45%
50%
5.3 months
4.6 months
4.0 months
3.6 months
3.2 months
1st Year Profit
$49,871
$64,850
$79,828
$94,807
$109,786
10 Year Profit
$858,716
$1,008,502
$1,158,288
$1,308,074
$1,457,860
Acceptance Rate
Pay Back
Default profit rate based on Modern Tire Dealer automotive service survey, 2012.
2
Default failure rates based on Hunter estimates.
3
Equipment Investment cost does not include Quick Tread.
1
Custom Quick Check™ system console option
The most compact console option fits virtually anywhere to seamlessly blend into your existing shop layout.
Stored within service writer’s desk.*
Integrated into customized cabinetry.* †
*Cabinetry, desk and LCD mounting brackets sold separately. †Shown with optional Monitor Kit (20-2899-1)
Quick Check console insert shown installed in Shure
wall-mount cabinet (791595).*
Custom Quick Check only compatible with drive-under and drive-thru configurations.
Configurations for every shop*
Sample system
Drive under Quick Check with brake tester and Quick Tread
Drive through Quick Check with Quick Tread
Cabinet mount Quick Check
Please see your Hunter Sales Representative for details
Quick Tread
* Hunter Quick Check console with
WinAlign 14.3 (or greater) required.
™
Drive over tread depth system
Coming
Soon!
Be sure to check out other
Hunter literature for more
quality products from
Hunter Engineering.
1214KAP10M.78
Copyright © 2014 Hunter Engineering Company
w w w. h u n t e r. c o m
Form 6566-T QT, 12/14
Supersedes Form 6566-T QT, 10/14