Download HP mp2220 User's Manual

Quick choice menu
Quick choice menu
Keystone
Corrects the slanted sides of the picture. This compensates for a projector
that is too high or low relative to the screen.
Auto keystone
Sets whether slanted edges of the picture are automatically corrected.
Reset keystone
Resets the keystone correction to zero (no correction).
Source
Displays the picture from the next input port.
Picture mode
Adjusts color and picture settings to one of several combinations designed
for different types of viewing situations. You can use a different picture
mode for each source or each viewing environment. You can also customize
each picture mode.
Auto-sync
Resynchronizes the projector to the input signal. This can compensate for
any change in the signal.
Hide
Blanks the picture. Press any button to show the picture again.
Volume
Adjusts the loudness of the speaker.
Mute
Temporarily turns off the projector's speaker.
Input menu
For a visual aid, see “Back panel” on page 10.
Input menu
VGA
Shows the source connected to the VGA port.
Composite
Shows the source connected to the composite-video port.
S-video
Show the source connected to the S-video port.
Source scan
Sets whether the projector automatically searches for input signals and
displays the next one found.
Widescreen input
Sets whether a widescreen (16:9) input device is in use. Adjusts the height
of the picture accordingly.
Using the on-screen menu
Downloaded from www.Manualslib.com manuals search engine
37