Download Haier L26A9-AK User's Manual

TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL
This User's Manual is applicable for the following models:
L26A9-AK,L37A9-AK,L37A9-AKF
Please read this manual carefully
before operating the unit, and keep
it for future reference.
*Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
*To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
*Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television
receiver in an area with heavy moisture. Attention should be
paid to avoid accidental scratches or impacts onto the LCD
screen.
Caution:
Unauthorized disassembly of this product is prohibited.
CONTENTS
Safety precautions ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １
Preparation for the Remote Control ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３
Keys and Ports．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４
Front panel ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４
Side panel ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４
Back panel ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ５
Keys of remote control．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ６
OSD display ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ７
Power on / off ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ８
Viewing TV program ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ９
Program play ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ９
Quick view and program scan ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １０
Tuning．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１
Automatic search ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １１
Manual search ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １２
MFT ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１３
Skip ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１４
Channel exchange and edit ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １５
Adjusting the picture ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １６
Multiple picture modes ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １６
Adjusting the sound ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １７
Multiple sound modes ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １７
Sound limit and mute ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １８
Setting the timer ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １９
Setting the Clock and time on/off ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． １９
On Prog ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２０
Setting the function ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２１
Language and OSD position ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２１
Menu timeout and menu background option．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２２
PIP ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．２３
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
２３
Child
lock
De-interlace ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２４
PC setup．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２５
Setting the other function．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２６
Picture still,sleep timer and program edit ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２６
Stream media broadcast system ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ２７
Connecting additional equipments ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３６
Antenna connection．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３６
How to connect the signal with other equipments．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３７
How to connect the video input terminal ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３８
How to connect the component input terminal ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３８
How to connect the PC input terminal ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ３９
External speaker installation ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４０
Woofer installation ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４０
Troubleshooting ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４１
Specification ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ４２
Safety Precautions
The product should be tightly fixed to
avoid drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Do not locate the product close to water
or oil, which may cause fire hazards.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially thunderstorm.
Do not use damaged or worn electric
plugs, and keep electric cord away from
heat sources to avoid electric shocks or
fire hazards.
Do not connect excessive sockets in
parallel or share the same socket by
multiple plugs to avoid fire hazards.
The product must be placed on a solid
and stable surface to avoid collapse.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact authorized after-sales
service if technical service is needed.
Disconnect the product from power supply
Keep the product away from a transformer and
contact authorized after-sales service
or heat source to avoid fire hazards.
if abnormal sound is heard in the product.
１
Safety Precautions (continued)
Don't use or store inflammable
materials near the product to avoid
explosion or fire hazards.
Don't place the product in a humid area to avoid
fire hazards.
The antenna of the product should
be away from electric cable to avoid
electric shocks.
Never touch the plug when your hand is wet
as this might cause electric shocks.
Always make sure that the television
is well plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water from flowing down along
the cable into the television.
Unplug the television, use soft fabric, The plug and electric cable must be kept
never chemicals, if you are going to
clean to avoid electric shocks or fire hazards.
make cleaning of the product. Make
sure that no water drops in the product.
Disconnect the television from power
supply and antenna when there is a
rainstorm or thunderstorm to avoid
electric shocks or fire hazards.
Disconnect the television from power
supply to avoid electric shocks or fire
hazards in a long vocation.
２
Preparation for the Remote Control
Battery loading
1.Slide open the cover of the battery compartment on the back of
the remote controller.
2.Load two 7# alkaline batteries in the compartment. (plus and
minus poles to respective mark)
3.Replace the cover of the battery compartment.
1
2
3
＋
Precautions
As strong light may interfere the
Make sure that there is no
signals, change your position to
obstacle between the remote operate the remote controller if
controller and television set. the television cannot be turned
on or off as you expect.
Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.
Make sure that two 7# 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable.
３
Keys and Ports
Front panel
５
１
２
３
４
- CH +
- VOL +
TV/AV
MENU
６
POWER
８
７
1、CH-/+ : program minus and plus , menu options
2、VOL-/+ : volume decrease and increase , menu reset and entry
3、TV/AV: all input source select :TV-VIDEO-SIDE VIDEO-S VIDEO-YUVUSB-VGA-DVI
4、MENU: menu display
5、Power on/off and indicator: in red when standby mode, in blue when display.
6、Remote control signal receive window
7、POWER : AC power on/off
8、Multi-media input
Side panel
VIDEO
L
Video
VIDEO
Audio L
AUDIO
-L
Audio R
AUDIO
-R
AUDIO
R
USB
Rear terminal
４
Keys and Ports (continued)
Back panel
PC/DVI
AUDIO IN
POWER
１
R-AUDIO-L
OUT
WOOFER
２
３
D-SUB IN
４
S-VIDEO
IN
VIDEO
IN
５
６
Y
Cb/Pb
DVI IN
Cr/Pr
７
８
R-AUDIO-L
OUT
９
VIDEO
OUT
１０
L - HD- R
IN
１１
ANT.
L -V/S- R
IN
１２
１３ １４
1、POWER:AC power input
2、R-AUDIO-L OUT：External audio output
｝
（Not available on L26A9-AK)
3、WOOFER：External woofer output
4、D-SUB IN：Computer input,For PC display purpose. Connects to the VGA analog
output connector of the PC display card.
5、S-VIDEO IN：S-VIDEO input
6、VIDEO IN：external video input
7、YCbCr,YPbPr：is an video input terminal connecting to the video output
terminal of the video output device(Y Cb Cr/ Y Pb Pr).
8、DVI IN：For high quality PC display purpose. Connects to the DVI digital output
connector of the PC display card.
9、R-AUDIO-L OUT：audio output (to external speaker)
10、VIDEO OUT：external video output
11、L-HD-R IN：external YUV (YCbCr,YPbPr) audio input
12、L-V/S-R IN：external S-VIDEO/VIDEO audio input
13、PC/DVI AUDIO IN ：external D-SUB/DVI audio input
14、ANT.： Connect antenna or CATV 75 Ω coaxial cable to receive TV/
CATV signal.
５
Keys of remote control
The remote controller cannot be operated unless the batteries are
properly loaded.
1.DISPLAY: Display the current info
1
2 2. POWER: Press to turn on the TV from standby
3
5
7
9
11
DISPLAY
POWER
STILL
MUTE
I/II
TV/AV S-VIDEO DVD/DTV PC/DVI
Q.VIEW
OK
13
16
MENU
18
19
25
VOL+
15
S SM
2
3
4
5
6
7
8
9
20
0
ZOOM/MOVE
22
24
26
28
-/-PIP
17
1
SWAP SCAN CH.EDIT
SHUTTLE SLEEP H.LOCK TIME SKIP
27
USB
RETURN
ENTER
29
12
CHPSM
21
4
6
8
10
14
CH+
VOL-
23
PIC.SIZE
ZOOM
HELP
mode. Press again to switch off the TV to standby
mode.
3.STILL: Press it to freeze-frame the current screen
press again to continue playing(never see the still
picture for long time, it would burn-in the screen)
4. ¢ñ/¢ò: Nicam selection in the signal
5. MUTE: Press this button to mute the sound.
Press again to reactivate the sound. Sound also
reactivated if the power is turned off then on or
if press VOL+ button.
6. PIC.SIZE: Press to select the display the size of
the screen(never see the 4:3 picture for long time,
it would burn-in the screen)
7. S-VIDEO: Press it to select S terminal input.
8. DVD/DTV: Select YUV input
9. TV/AV : Press this key to select the sources
10. PC/DVI: Press it to select inputs as follows:
TV-VGA-DVI-TV
11. OK: Press to confirm
12. Q.VIEW: Back to the last channel
13. CH+/-: Select the option up and down in menu
or select channels when there is no OSD.
14. MENU: Press to display or exit the menu
15. VOL+/-: Left and right orientation in menu option
or adjust the volume when there is no OSD.
16. PSM: Press to select the picture mode
17. SSM : Press to select the sound mode
18. Number key: Press to select the channel number
19£¬26£¬27£¬28 are not available in these set .
20. ZOOM/MOVE: PIP moving
21. PIP: PIP on or off
22. SCAN: Scan all preconcerted channel program
23.SWAP: Switch the input signal of the PIP and
the main picture
24. CH.EDIT: Press to display the stored channel
diagram
25. SLEEP: Can be used to set time to change
the TV into the standby status after a period of
preset time.
29. Only for the multi-media ,reference to
the instruction following.
The cover of the multi-media keys
press down to the appropriate position
Note:
The function just takes the remote control for example in this manual
P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding
with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys.
６
OSD display
There are some OSD (on screen display)following for you to reference
Picture menu
Audio menu
Brightness
Contrast
Saturation
Hue
Sharpness
Color Temp.
Picture Audio
Bass
Treble
Balance
Surround
SubWoofer Switch
SubWoofer
AVL
50
50
50
50
50
Std
A
A
B
C
B
C
Tuner
Func
PC
Time
Tuner menu
Picture Audio
Tuner
0
PAL
DK
Off
-----
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
＞＞＞
＞＞＞
A
Time
Tuner
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
B
C
Func
PC
Time
PC menu
Picture Audio
Tuner
Func
PC
Time
Time menu
Clock
Off Time
Off Time
On Time
On Time
On Prog.
＞＞＞
Auto
Clock
Phase
H_Position
V_Position
I/P Info.
Picture Audio
PC
Function menu
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
Picture Audio
Func
50
50
50
Off
Off
50
Off
0
0
0
0
VGA
0:00
Off
0:00
Off
0:00
0
A
A
B
C
B
C
Tuner
Func
PC
Time
Picture Audio
Tuner
Func
PC
Time
Note:
There may be some difference between the above OSD and your realset,you could adjust
it according to what you want following the steps as follow:
1. Press MENU button to enter the main menu
2. Press VOL-/+ to select the main menu left and right orientation
3. Press OK or CH+/- to enter the submenu
4. Press MENU to back to the last menu
5. Press VOL+/- to adjust the item of the menu
6. There is no SubWoofer Switch and SubWoofer in sound menu in L26A9-AK
７
Power on/off
Power on/off
Power ON/OFF
1.Switch on power supply (indicator in
red in standby)
2.If the television is on standby mode ,
you could press POWER button on
remote controlleror POWER£¨ £©
button on the TV to turn on the TV.
3.If you want to switch off the TV to
standby mode press POWER£¨ £©
button on TV or POWER button on
remote controller .
POWER
３
4.Disconnect the power supply or unplug
the television if it is intended to completely
cease the television performance.
８
Viewing TV Program
There are 160 channels from 0 to 159.
观看电视节目play
Program
How to select program
1
2
3
4
5
6
7
8
9
Select desired program
1.Select buttons directly
If program number is selected, press digit
1~9 directly.
2.Select buttons in sequence
Press CH+/- button for program option. (Note:
If Skip mode is activated, the program will not
appear by this way.)
0
Choose the proper volume you like
Press VOL+/- button to adjust sound volume.
If the color or sound of one channel is abnormal
It might be because the color or
sound system has been set
improperly, you may follow the
instruction below to adjust it :
press MENU and VOL+/- to
select Tuner menu ,you can see
the form , then press
CH+/- to enter
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
MENU
CH-
Func
PC
Time
If the color of the picture is abnormal
Press CH+/- to "Color Sys.”, then press VOL+/- to
select the proper system.(AUTO、PAL,NTSC443 and
NTSC M will appear in sequence).
CH+
VOL-
Tuner
VOL+
If the sound is abnormal
Enter the Tuner as above and
CH+/- to “Sound Sys.”item.
Then press VOL+/- to select the
system you want.
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
９
Tuner
Func
PC
Time
Viewing TV Program（continued）
Quick view function can back to the channel you watched just now quickly
Program scanning function is to let the television automatically scan all preconcerted
channel program .
Quick view and program scan
Quick view
1.For example, if you have
viewed channel 8 just now
and you are watching channel
18 now (as right figure)
Q.VIEW
１８
８
2.If you want to back to
channel 8,just press
Q.VIEW button
１８
3.If you want to return to
channel 18,press Q.VIEW
button again .
Program scanning function
SCAN
1、If you want to scan the programs and select your favorite
channel, just press the SCAN button then the television
will start scanning from the present channel with a rate
of three seconds per channel
０
and until all the preconcerted
programs have been
１
displayed once.
CH+
2.If you want to terminate
VOL-
MENU
VOL+
this function during the
scanning, press the SCAN or
CH-
MENU button again, and the
program will stay at the
present channel
１０
０
Tuning
There are three ways of searching:automatic search,manual search and MFT
manual fine tune)
You may operate it either on the TV or on the remote control.Here is mainly
about the remote control
Automatic search
Automatic search
1、Press MENU button and
VOL+/- to select Tuner menu，
Then press CH+/- to enter
CH+
VOL-
MENU
VOL+
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
CH-
2、Press CH+/- button to
move to Auto Search item。
Tuner
Func
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
PC
Time
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
Tuner
Func
PC
Time
3、Press VOL+,then Auto Search
will work。The TV set will search
automatically all available
Auto Search
programs, after that, all available ＣＨ　９
Freq.
308MHz
program will be stored in turn
and the TV set will return to the
first channel
CH+
VOL-
MENU
VOL+
If you want to stop the search, just press MENU button
The order of the automatic search is due to the frequency of the
program, generally speaking, it is used only at the first time you
search the program, and once the order of the program has been
confirmed, you don't have to use this function, otherwise the
order of the program will be changed.
After searching
CH-
Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 9).
１１
Tuning（continued）
Manual search
Manual search
１　1. Press CH+/- button or the
Direct-digit choosing button to
select a channel directly(take
channel 1 for example).
CH+
VOL-
MENU
VOL+
2、Press MENU and VOL+/to select Tuner menu，then
press CH+ to enter
CH-
3、Press CH+/- to move to
Search Set，then press
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
VOL+ to enter
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
Tuner
Func
PC
Time
4、Press CH+/- to move to
Fine
Search
32
Search
>>>
Freq. 112.28MHz
CH+
VOL-
MENU
CH-
VOL+
5. Press VOL+/- button to start
Picture
searching.
VOL- button is used to search the
lower frequency channel.
VOL+ button is used to search the
higher frequency channel.
Repeat the steps until you find
the channel you need.
１２
A
B
C
Audio
Tuner
Func
PC
Time
Tuning（continued）
MFT
MFT(manual fine tune)
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
CH+
VOL-
MENU
VOL+
１　1. Press CH+/- button or the
Direct-digit choosing button
to select a channel directly (take
channel 1 for example).
CH-
2、Press MENU and VOL+/to select Tuner，then
press CH+/- to enter
3、Press CH+/- to move to
Search Set，then press
VOL+ to enter the menu
Prog.
Color Sys.
Sound Sys.
Skip
VOL-Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
Tuner
Func
PC
Time
4、Press CH+/- to move to
Fine.
Fine
32
Search
>>>
CH+
Freq. 112.28MHz
VOL-
MENU
VOL+
A
B
C
CH-
Picture Audio
Tuner
Func
PC
Time
5. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frequency channel.
VOL+ button is used to search the higher frequency channel.
１３
Tuning（continued）
Skip
Skip
After the programs are preset, you can skip some
programs so that to select your favorite channels only.
CH+
VOL-
MENU
VOL+
1. Press CH+/- button or
Direct-digit choosing button to
select a channel directly (take
channel 1 for example).
You could also select your
favorite channel number in
menu
１　CH-
2¡¢Press MENU and VOL+/to select the Tuner menu £¬then
press CH+/- to enter.
3¡¢Press CH+/- to move to
Skip.
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
4. Press VOL+/- button to set it
On.
CH-
PC
Time
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
MENU
Func
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
CH+
VOL-
Tuner
VOL+
Tuner
Func
PC
Time
5. Press MENU button to close the menu. When you
select channels with CH+/- button, this channel will be
skipped. However, you can also use the Direct-digit Choosing
button on the remote control to select this channel directly.
And the channel number will be in red.
If you want to recover the skipped channel
1. Use Direct-digit choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set Skip Off.
１４
Tuning（continued）
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange and edit
Channel Exchange
（For example, to change between channel 6 and 9 ）
1、Press MENU and VOL+/to select the Tuner menu，
then press CH+/- to enter。
CH+
VOL-
MENU
VOL+
2、Press CH+/- and move to
Exchange
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
Picture Audio
CH-
Tuner
Func
PC
Time
3、Press VOL+ to enter
the submenu.
4、Press CH+/- to move to
Exchange Prog. then press
direct-digit to set the channel
you want to exchanged to 6.
And then press OK to confirm
OK
Current Prog.
009
Exchange Prog.
006
Exchange
>>>
A
B
C
Picture Audio
Tuner
Func
PC
Time
5、Press CH+/- button, move to Exchange，then
press VOL+ button to confirm.Then the programs of the two
channel will be exchanged.
Program edit function
This function can enable you to rename your favorite
channel
1、Press MENU and VOL+/- to
select the Tuner menu，then
press CH+/- to enter.
CH+
VOL-
MENU
VOL+
2、Press CH+/- to select
Prog.，Press VOL+/- to set
the channel number
Prog.
Color Sys.
Sound Sys.
Skip
Prog.Name
Search Set
Auto Search
Exchange
0
PAL
DK
Off
----＞＞＞
＞＞＞
＞＞＞
A
B
C
CH-
Picture Audio Tuner Func
PC
Time
3、Press CH+/- to select
Prog.Name，and press VOL+/to select the position you want to adjust ,
then press CH+/- to select among "A-Z","0-9" ,"、" ，"-"
and blank .
4、After the operation, just press OK to confirm
１５
Adjusting the Picture
Multiple picture modes
How to select the picture mode
You may select the mode you want from the three preset
modes and one individual mode.
Press the PSM button to select a mode you
like. STANDARD, SOFTNESS,USER and BTIGHTNESS
totally four picture modes can be selected alternately.
PSM
PICTURE QUALITY
MODE
STANDARD
MEDIUM COLOR AND BRIGHTNESS
SOFTNESS
LOW COLOR AND BRIGHTNESS
USER
SET BY YOURSELF
BRIGHTNESS
BRIGHT COLOR
Set the parameter of USER
You could set it just by your favorite
1、Press MENU and CH+/- to
CH+
enter Picture menu。
VOL-
MENU
CH-
Brightness
Contrast
Saturation
Hue
Sharpness
Color Temp.
VOL+
2. Press CH+/- button, move to
the option you want to adjust,
then press VOL+/- button to do
the adjustment . Then the
parameter will be automatically
stored in USER option.
A
B
C
Picture Audio
VOL+
VOL-
Brightness
BRIGHT
DARK
Contrast
STRONG
WEAK
OPTION
Tuner
THICK
LIGHT
GREEN
PURPLE
Sharpness
SHARP
SOFT
Color Temp.
Std-Cool-Warm
Saturation
Hue
Note：Hue only available in NTSC system.
１６
50
50
50
50
50
Std
Func
PC
Time
Adjusting the Sound
Multiple Sound Modes
How to select the sound mode
You may select the mode you want from the four preset
modes and one individual mode.
Press the .SSM button to select the sound quality that you
want.
Mode
S SM
Sound quality
FILM
Theater sound
NEWS
Clear
MUSIC
For Music
STANDARD
Standard sound
USER
For your convenient to set
Setting the parameter of USER
You could set the parameter if you select USER mode.
CH+
VOL-
MENU
CH-
VOL+
1、Press MENU and VOL+/to select Audio menu，
then press CH+/- to enter
Bass
Treble
Balance
Surround
SubWoofer Switch
SubWoofer
AVL
50
50
50
Off
Off
50
Off
2. Press CH+/- button, move to
the option you want to adjust, then
press VOL+/- button to do the
Picture Audio Tuner Func
PC
Time
adjustment.
Note：SubWoofer can only be adjusted when SubWoofer Switch is
A
B
C
set On, SubWoofer and SubWoofer Switch is not available in
L26A9-AK.
OPTION
VOL-
Bass
Decrease
Increase
Treble
Decrease
Increase
Balance
VOL+
Decrease right channel
Decrease left channel
OPTION
Select On
Surround
Stereo sound
SubWoofer Switch
Enhance the effect
１７
Adjusting the Sound
(continued)
Sound limit and mute
Sound limit
1、Press MENU to display
the menu.
CH+
VOL-
MENU
VOL+
Bass
Treble
Balance
Surround
SubWoofer Switch
SubWoofer
AVL
2、Press VOL+/- to select
Audio menu。
50
50
50
Off
Off
50
Off
A
CH-
B
C
Picture Audio
Tuner
Func
PC
Time
3、Press CH+/- to enter it .
4、Press CH+/- to select
AVL .
Bass
Treble
Balance
Surround
SubWoofer Switch
SubWoofer
AVL
5、press VOL+/- button to adjust
the parameter you expect or set Picture
On or Off.
50
50
50
Off
Off
50
Off
A
B
C
Audio
Tuner
Func
PC
Time
How to use the MUTE function
MUTE
When you want to pay attention to the environment or
answer a telephone, or to meet guests, using the mute
function is very convenient.
X
１、Press MUTE button, a sign
will appear at the top right
corner of the screen, and the
sound of the TV set is cut off.
2.In order to recover the sound,
press MUTE button again or
press VOL+button.
Note: If you have pressed VOL- button in the condition of
the mute mode, the value of the volume would decrease, but
the sound of the TV is still in mute mode.
１８
Setting the Timer
This TV set provides you with three timer functions such as timer on, timer off and On Prog.
The basic unit of the time in the menu is minute.
The Clock will recover to 0£º00 and the On Prog. will recover to 0 when switch the TV on
after off.
Setting the Clock and timer on/off
Setting the Clock
You should check whether the Clock is the same with the standard
time of the area you are being in; if not, please adjust it as follows
CH+
VOL-
MENU
VOL+
CH-
1、Press MENU and VOL+/- to
select Time menu。
2.Press CH+/- to move to Clock
and press VOL+ to enter the
digital position you want to adjust,
then press CH+/- to adjust the
value
OK
Clock
Off Time
Off Time
On Time
On Time
On Prog.
0:00
Off
0:00
Off
0:00
0
A
B
C
Picture Audio
Tuner
Func
PC
Time
3.After the setting, press OK to confirm
Timer on/off
When timer on function is used, the TV set can automatically turn the
power on at the preset time in the standby status and display the
preset program.Using timer off function can turn the TV set
automatically into standby status at the preconcerted time.
1、Press MENU and VOL+/- to
select Time menu.
CH+
VOL-
MENU
CH-
VOL+
Clock
Off Time
Off Time
On Time
On Time
On Prog.
2、Press CH+/- to move to
On Time, Press VOL+ to enter
the digit position，and then press
CH+/- to adjust the value
（eg.18：00）
。
Picture
0:00
Off
0:00
Off
0:00
0
A
B
C
Audio
Tuner
Func
PC
Time
Same as step 2 of Clock setting .
3.Press CH+/- to move to
Off Time，then press VOL+/- to
set on
4、Repeat steps 1 and 2 to
set Off Time（eg.23:00)。
１９
Clock
Off Time
Off Time
On Time
On Time
On Prog.
0:00
Off
0:00
Off
0:00
0
A
B
C
Picture Audio
Tuner
Func
PC
Time
Setting the Timer
(continued)
On Prog.
On Prog.
Using this function ,the TV set can display the preset program
automatically when the TV set is turned on.
CH+
VOL-
MENU
CH-
1、Press MENU to display
the menu.
VOL+
2、Press VOL+/- to select
Time menu.
Clock
Off Time
Off Time
On Time
On Time
On Prog.
0:00
Off
0:00
Off
0:00
0
A
3、Press CH+/- to move to
On Prog.
4.Press VOL+/- button to set
the channel number you want
(eg. 18)
B
C
Picture Audio
Tuner
Func
Clock
Off Time
Off Time
On Time
On Time
On Prog.
PC
Time
0:00
Off
0:00
Off
0:00
0
A
B
C
Picture Audio
２０
Tuner
Func
PC
Time
Setting the Function
Language and the OSD position
How to select the language on the screen
1.Press MENU and VOL+/to select the Func menu.
CH+
VOL-
MENU
VOL+
2.Press CH+/- button, move to
OSD Language.
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
CH-
Picture Audio
Tuner
Func
PC
Time
3.press VOL+/-button to
select the language and the menu on the screen will
be displayed with the language you select.
How to select the OSD position
Using this function,you could select the position of the OSD
on the screen you want.
1.Press MENU and VOL+/- to
select the Func menu .
2.Press CH+/-, move to
OSD Position .
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
Picture Audio
Tuner
Func
PC
Time
CH+
VOL-
MENU
VOL+
3.Press VOL+/- to enter
submenu of the OSD Position .
OSD H-Position
50
OSD V-Position
50
CH-
4.Press CH+/- to select the item
Picture Audio
you want to adjust, and then
press VOL+/- to adjust. After all,
press MENU to back to the main menu.
２１
A
B
C
Tuner
Func
PC
Time
Setting the Function (continued)
Menu timeout and menu background option
基
本
操
作
Menu timeout option
If time you set in OSD menu expires after the latest press, the
menu will disappear automatically
1.Press MENU and VOL+/- to
select the Func menu .
CH+
VOL-
MENU
VOL+
2.Press CH+/- and move to
OSD Timer .
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
Picture Audio
Tuner
Func
PC
Time
CH-
3.Press VOL+/- to select the time
Note：
the basic unit of the OSD Timer is second。
Menu background option
1.Press MENU and VOL+/- to
select the Func menu .
2.Press CH+/- to move to
Transparency .
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
Picture Audio
Tuner
Func
PC
Time
CH+
VOL-
MENU
CH-
VOL+
3.Press VOL+/- to adjust the
value you want. You could press
MENU to back to the main menu.
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
Picture Audio
２２
Tuner
Func
PC
Time
Setting the Function (continued)
PIP
PIP
Using this function,you could adjust the H-POSITION ,
V-POSITION and the size of the PIP.
1.Press MENU and VOL+/- to
select the Func menu .
CH+
VOL-
MENU
VOL+
2.Press CH+/- and move to
PIP .
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
Picture Audio
CH-
3.Press VOL+/- to enter the
submenu of PIP .
4.Press CH+/- to select the item
you want to adjust ,then press
VOL+/- to adjust. After this ,you
could press MENU to back to
the main menu.
Tuner
Func
PIP Size
PC
Time
Off
PIP Source
VGA
PIP H-POS
100
PIP V-POS
100
A
B
C
Picture Audio
Tuner
Func
PC
Time
Note:Press source buttons(eg.TV/AV)to change the main input;
The signal of PIP can be changed in the submenu of PIP .
Child Lock
If Child Lock is set On，the keys on the TV will be locked
that means you could not operation the TV with these buttons.
CH+
VOL-
MENU
CH-
VOL+
1.Press MENU and VOL+/- to
select the Func menu .
2.Press CH+/- and move to
Child Lock .
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
Picture Audio
Tuner
Func
PC
Time
3.Press VOL+/- to set On or Off. You could press MENU to
back to the main menu.
２３
Setting the Function (continued)
De-interlace
De-interlace
Using this function,you could improve the effect of the
picture.
1.Press MENU and VOL+/- to
select the Func menu.
CH+
VOL-
MENU
VOL+
2.Press CH+/- and move to
De-interlace .
OSD Position
OSD Timer
OSD Language
PIP
Transparency
De-interlace
Child Lock
＞＞＞
60S
English
＞＞＞
0
＞＞＞
Off
A
B
C
CH-
Picture Audio
3.Press VOL+/- to enter the
submenu
4.Press CH+/- to select the item
you want to adjust, then press
VOL+/- to adjust it .
Tuner
Func
MOTION
PC
Time
Medium
FILM MODE
Off
LADI
On
A
B
C
Picture Audio
MOTION
Tuner
Func
Time
To decrease the blur of the motorial image
FILM MODE To improve the image while filming
LADI
PC
To decrease the sawtooth
２４
PC Setup
PC setup
PC setup
You could adjust the correlative item if you use this set as
a monitor
1.Press MENU and VOL+/- to
select the PC menu .
CH+
VOL-
MENU
VOL+
＞＞＞
Auto
Clock
Phase
H_Position
V_Position
I/P Info.
2.Press CH+/- and move to the
item you want to adjust
0
0
0
0
VGA
A
B
C
CH-
Picture Audio
Tuner
Func
PC
Time
3.Press VOL+/- to adjust the item
or enter its submenu(according
the item setting)
4.If enter the submenu ,press CH+/- and move to the item
you want to adjust , and then press VOL+/- to adjust. Then
you could press MENU to back to the main menu.
２５
Setting the other Function
Picture still,sleep timer and program edit
Picture still
You could press STILL button
to “freeze-frame”the current
screen. And press the button
again to continue playing
STILL
Freeze
Sleep timer
SLEEP
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
Program edit
CH.EDIT
CH+
VOL-
MENU
CH-
VOL+
1.Press CH.EDIT button to display
the current program diagram
2.There are ten channels per page. You
could select the channel on this page
with CH+/-, also, you could press
VOL+/- to turn to the other page , you
could press CH+/- to select the channel
you want to watch, then press OK to
confirm. Press CH.EDIT or MENU to
exit.
Prog. Prog.Name
0
1
2
3
4
5
6
7
8
9
QTV-1
CCTV1
CCTV2
CCTV3
CCTV4
CCTV5
CCTV6
CCTV7
CCTV8
CCTV9
3. You could see every channel¡¯s name by the
program edit function. It is very convenient for you
to watch the program you want.
Note:
The program name can not be more than five letters
２６
Stream Media Broadcast System
Stream media play prepare
are used for internal files. This
television can only play some AVI
and MPG files of this format. Those
files with suffix of dat are not movie
files, but data files used by
computers, and cannot be played for
movies.
5.External card reader supports
most digital cards available in the
market. Readable digital cards are
classified according to the property
of card readers and can be
connected to mobile hard disks
(working voltage 5.0V, working
current not over 500mA).
6. Some time the television operation
may be halted due to excessive rate
of information code errors. In such
case, restart the system. As there are
many nonstandard USB mobile
devices in the market. If this kind of
USB mobile devices are used in the
stream media play system, the
problem of identification failure
might occur. The same problem may
also happen with computers, not
televisions.
7.It is suggested that the external
devices with USB2.0 interface be
used to improve velocity of
information reading and continuity of
information play.
1. Supporting equipment
1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 and digital camera.
2.Equipment supporting PTP
agreement includes some digital
camera.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2
and MPEG1;
Supporting file format£º
*.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3,
*.WHA, *.JPG and *.JPEG. Due to
particularity of file code and file mode,
It is possible that some files cannot be
read.
2 If Pic & Music mode is activated,
relative media file format will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, the speed of picture operation
response might be affected.
3.Before starting operation, verify
USB storage device is of FAT32 and
FAT file system format. At present, this
television does not support NTFS and
the file systems of other format.
4.Many movie files use suffix of AVI and
MPG. However, many kinds of format
２７
Stream Media Broadcast System
Stream media system setup
Note: Memory cards or USB devices are not
supplied with this TV.
USB setup
AAA Multimedia Player
1 Insert USB in the card slots at the left side the TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter
the stream media system.
Card
USB
File Copy
SETUP
CARD setup
Remove USB
This TV is compatible with the card of SD/MMC/CF/MS/SM
format.
Press ENTER key to play this devices
How to use
1、Jack of card Instructions：
Jack of SM card
Jacks of SD、MMC、MS card
｝ Jack 1
｝ Jack 2
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
representation position
Jack of CF card
2、Insert the card as right direction. As following Card in common use
1）CF card：
2）MMC card：
（jack）
（jack）
4）SM card：
（jack）
5）SD card：
（jack）
128 MB
M EMORY S TICK
MB
128
MB
CARD
DIGITAL MEMORY CARD
128
（jack）
M ULTIM EDIA
C OMPACT F LASH
3）MS card：
ID
128MB
SD
128MB
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
２８
Stream Media Broadcast System
Removing USB device
ý
1 Press up¡ or down ü to select¡Remove USB,
and press ENTER button to ensure it.
2 press RETURN button to exit menu.
3 Remove the memory card/USB device.
4 If to remove the card device, press RETURN
button to return to the main menu, and
remove the card.
AAA Multimedia Player
Card
USB
File Copy
SETUP
Remove USB
Press ENTER key to remove USB devices
Card data protection
- Do not remove the card/USB device when the content is being read or when
browsing. Such action may damage the memory card/USB device.
- Do not touch the terminals on the back of the card.
- Always insert a card in the correct direction. Failure to do so may result in
damage to the card and the unit.
- Do not subject the card to excessive pressure or strong impacts.
- Malfunctions of the unit or card may result in data loss or damage to the card.
- Haier shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed
by young children. Do not allow
children to handle memory cards.
Please remove the memory card
immediately after use.
２９
Stream Media Broadcast System
To start the media play
1. Press USB button to enter media play system.
2. Press up¡ or downü button ¡
to select the desired option.
3. Press ENTER button to
enter desired option.
ý
AAA Multimedia Player
Card
USB
File Copy
SETUP
4. Press RETURN to return the
previous menu.
Remove USB
Press ENTER key to play this devices
USB
RETURN
ENTER
ZOOM
5. If to exit USB system, you need to return to the main
menu to protection card data.
HELP
Note: If there are no operation two minute later, the
TV will enter the saver automatically, at the time, press
any button of USB system to exit the saver menu.
To operate the menu
1. Press up↑ or down↓
2、Press
or
with left or right.
to select the item with up or down.
to select the desired item of submenu
3、Press ENTER button to ensure the desired option、to
enter the submenu、to resume the speed of standard.
4. Press
or
button to operate play quickly or slowly.
5.Press pause button to make the program stop，and press
again to resume it.
6.Press ZOOM button to make zoom, and press
or ↑ ↓/ button to enjoy the detail.
or
7、Press HELP button to call up or exit the OSD information.
And press HELP button to call up or exit the OSD during
operating file copy.
8、press RETURN button to return to previous menu and
stop play, press RETURN button repeatedly to return to main
menu.
３０
Stream Media Broadcast System
To select stream media broadcast system
1.Press up↑ or down↓ button
to select "Card"or "USB".
(The device be inserted
and identified).
2. Press ENTER button to
enter adjusted option.
USB
RETURN
ENTER
ZOOM
HELP
AAA Multimedia Player
Card
USB
File Copy
SETUP
Remove USB
Press ENTER key to play this devices
To play picture
AAA Multimedia Player
1. Press up↑ or down↓
button to select Picture item.
2. Press ENTER button to
enter the menu of play.
3. Press again up↑ or down↓
button to select desired
enjoy picture, and then
press ENTER button to enter
the play menu.
4. On screen display, Press ↑
or ↓ to select the speed
of play.(Normal, Slow, Fast).
5. Press
or
button to
swap the picture of next and
previous. Press RETURN button
to return.
Picture
Movie
Music
Music and Pic
AAA Multimedia Player
F-007
F-008
F-009
F-010
F-011
F-012
JPEG
.JPG
.JPG
.JPG
.JPG
.JPG
.JPG
Play
0016.JPG
Slideshow speed ：Slow
IMAGE
To enjoy the picture detail
Note:
the play file menu are
different with your USB
devices.
1. After selecting the picture to play, press ZOOM to
select desired zoom.
2. Press HELP button to exit the display, and then
press ¡ or ü or¡ or
ý
to move and enjoy the picture detail.
To make the picture overturn
Each press of
button to make overturn 900 with right,
press ENTER button to resume the program playing.
３１
Stream Media Broadcast System
To enjoy music
1. Press up↑ or down↓
button
to select "Music" option.
USB
AAA Multimedia Player
2. Press ENTER button to enter
play menu.
Picture
Movie
RETURN
ENTER
ZOOM
HELP
Music
Music and Pic
3. Press up↑ or down↓ button to
select desired music, and
then press ENTER button to
play music.
AAA Multimedia Player
Note: The play file menu are
different with your USB device.
4. When playing music,
press up↑ or down↓ to select
play mode, (play mode:
standard, program, Random;
Repeat mode: Disc Repeat,
Folder Repeat, File Repeat)
and press ENTER button to
ensure the mode.
USB
RETURN
ENTER
ZOOM
HELP
The day went away .MP3
The day you went away.MP3
Play mode：standard
5. When playing music, press
01£º07 / 04 £º20
or
button to swap the
next and previous music
6. Press RETURN button to exit
the playing.
Note: 1. DISC Repeat mode: press up↑ or down↓ button,
the DISC Repeat will appear on
the screen, and then press
１：＿＿
２：＿＿
ENTER to ensure it.
３：＿＿
2. Program mode:
４：＿＿
５：＿＿
press ↑ or↓ button to select
Done
the music in right list, and press
ENTER button to program in turn,
and then press
button to
select "Done", and then press ENTER button
to ensure it.
The day went .MP3
Soft .MP3
Soft .MP3
３２
The day went .MP3
Stream Media Broadcast System
To play Movie
1. Press up↑ or down↓
select "Movie" option.
button to
AAA Multimedia Player
USB
RETURN
ENTER
ZOOM
2. Press ENTER to enter play
menu.
Picture
Movie
Music
HELP
3. Press again up↑ or down↓
button to select desired
music, and press again
ENTER button to play it.
Music and Pic
AAA Multimedia Player
4. On screen display, press
or
button to select in
turn:
File＊-PlayBack Control-Audio
channel-Play Mode
5. Press
or
button
to set speed, press ENTER button
to resume to standard mode.
USB
RETURN
ENTER
ZOOM
6. Press
or
button to
select the next movie or
previous.
HELP
7. Press RETURN button repeatedly
to return.
３３
E08-8SOBTILES-1
Stream Media Broadcast System
To select the Music and PIC item
USB
RETURN
ENTER
ZOOM
HELP
1. Press up↑ or down↓ button
to select "Music and Pic"
option, and press ENTER
button to enter menu.
AAA Multimedia Player
Picture
2. Press up↑ or down↓ to select
desired file, and press
button to ensure it.
( to cancel). Repeat step
2 to select more file, and
press ENTER button to enter
play menu.
Movie
Music
Music and Pic
AAA Multimedia Player
F-007
F-008
F-009
F-010
F-011
F-012
3. On screen display menu,
press up↑ or down↓ to select
the speed to play.( Normal,
Slow, Fast).
MP3
4. Press
or
button
to swap the next and previous
picture, press
or
button to select the music.
The day you went away .MP3
JPEG
0016.JPG
Play mode：standard
USB
RETURN
ENTER
ZOOM
Note: press pause button to
stop playing the picture.
HELP
5. Press repeatedly RETURN button
to return.
Note: On the music and picture, the playing music
is *.mp3 format.
３４
.JPG
.JPG
.JPG
.JPG
.JPG
.JPG
Play
00：01:43
IMAGE
Stream Media Broadcast System
Copy file function
1. Press up↑ or down↓
"File Copy" item.
to select
AAA Multimedia Player
USB
2. Press ENTER button to enter
the copy menu.
Card
USB
File Copy
RETURN
ENTER
ZOOM
HELP
3. Press ENTER button to
enter the file menu, and
press up↑ or down↓ button to
select "Card" or "USB"。
SETUP
Remove USB
Press ENTER key to enter COPY menu
Select source Port:
Card
USB
4. Press ENTER button to enter
Card or USB, and select the
files to copy, then press
HELP button to call up COPY
and PASTE, and then press
↑ ↓/ button to select
COPY, and press ENTER button
to confirm, press again
↑ ↓/ button to select
PASTE, then press
ENTER button to paste, in this
time, the "File already exits,
overwrite it？"will appears
on the screen, and press
or
button to select
YES/NO, and then press ENTER
button to confirm.
5. Press ENTER to cancel.
Note:
button to select the
all files;
button to cancel.
３５
Root
F-007
F-008
F-009
F-010
F-011
F-012
.JPG
.JPG
.JPG
.JPG
.JPG
.JPG
Root
F-007
F-008
F-009
F-010
F-011
F-012
.JPG
.JPG
.JPG
.JPG
.JPG
.JPG
COPY
PASTE
Connecting Additional Equipments
Antenna connection
Generally speaking,to enjoy a clearer picture.We reconmmend that
you use a CATV system or an outdoor antenna.In different places,
the suitable antenna type and position are different.
ＶＨＦ
ＵＨＦ
Mixer
£¨additional
purchase£©
Antenna input
standard
coaxial type£©
ANT. £¨75
AC cable
300
AC power socket
twin-lead cable
＋
＋
Antenna adapter
£¨additional
purchase£©
75
coaxial cable
Plug
£¨additional
purchase£©
Note£º
It is recommended that you had better use 75 ¦¸coaxial to remove the
disturbance caused by airwave.
Do not lay the twin-lead cable under the TV set.
You need the suitable coaxial cable. and plug to receive the best picture
and sound.
３６
Connecting Additional Equipments
Some additional equipments could connect with this set. There is some
description about this following. You could check the input after the
connection.
DISPLAY
I/II
STILL
MUTE
PIC.SIZE
TV/AV S-VIDEO DVD/DTV PC/DVI
TV/AV：All source inputs
Q.VIEW
OK
CH+
VOL-
VOL+
MENU
S-VIDEO：S-VIDEO input
CHS SM
PSM
1
DVD/DTV：YUV input
4
5
6
7
8
9
0
ZOOM/MOVE
-/-PIP
3
2
SWAP SCAN CH.EDIT
SHUTTLE SLEEP H.LOCK TIME.SKIP
PC/DVI：PC and DVI input
USB
RETURN
ENTER
ZOOM
HELP
Note:
You could also use the TV/AV button on the front panel of the TV to change the inputs
How to connect the signal with other equipments
Output signal
PC/DVI
AUDIO IN
POWER
R-AUDIO-L
OUT
WOOFER
D-SUB IN
S-VIDEO
IN
VIDEO
IN
Y
Cb/Pb
Cr/Pr
DVI IN
R-AUDIO-L
OUT
VIDEO
OUT
L - HD- R
IN
ANT.
L -V/S- R
IN
VCR
R-AUDIO-L
OUT
VIDEO
OUT
Video output
TV
Audio output
３７
Connecting Additional Equipments
How to connect the video input terminal
Output signal
PC/DVI
AUDIO IN
POWER
R-AUDIO-L
OUT
D-SUB IN
WOOFER
S-VIDEO
IN
VIDEO
IN
Y
Cb/Pb
Cr/Pr
DVI IN
R-AUDIO-L
OUT
VIDEO
OUT
L - HD- R
IN
ＶＣ Ｒ
S-VIDEO
IN
Ｓ－ＶＩ Ｄ Ｅ Ｏ Ｖ Ｃ Ｒ
ANT.
L -V/S- R
IN
L -V/S- R
IN
VIDEO
IN
S-VIDEO output
Video output
DVD Player
Audio output
How to connect the component input terminal
Output signal
PC/DVI
AUDIO IN
POWER
R-AUDIO-L
OUT
D-SUB IN
WOOFER
ＶＣＲ
VIDEO
IN
Y
Cb/Pb
Cr/Pr
DVI IN
R-AUDIO-L
OUT
Y
Y
DVD digital box
（DTV-STB）
S-VIDEO
IN
Y、Pb，Pr
output
Pb
Pr
Video output
３８
VIDEO
OUT
L - HD- R
IN
Cb/Pb
L -V/S- R
IN
Cr/Pr
L - HD- R
IN
ANT.
Connecting Additional Equipments
How to connect the PC input terminal
PC/DVI
AUDIO IN
POWER
R-AUDIO-L
OUT
WOOFER
D-SUB IN
S-VIDEO
IN
VIDEO
IN
Y
Cb/Pb
Cr/Pr
DVI IN
R-AUDIO-L
OUT
L - HD- R
IN
VIDEO
OUT
PC/DVI
AUDIO IN
D-SUB IN
DVI IN
Note:
The computer above is just an example
The other equipments and coaxial are not included in the TV set
PC input terminal is the DDC1/2B. If the computer is not provide
with DDC1/2B,you should adjust it when connecting.
Some models of PC can not be connected with this TV set
The D-sub 15P terminal of DOS/V need not adapter for the computer
The H/V scan frequence can not exceed the regulate range.
３９
L -V/S- R
IN
ANT.
Connecting Additional Equipments
External speaker installation
1. Face the LCD screen upside down on a clean blanket or a bracket and pay
attention not to indent the casing. Lay the two speaker aside of the LCD.
2. Lay a bracket on the speaker and hind
External speaker
rind, Fix 4 screws to the speaker and
hind rind.
3. Connect the speaker cable to the speaker
terminal of LCD TV and the speaker terminal,
and insert the connecting cable into the terminal
slot, Release the speaker terminal, and ensure
that the white connecting cable is inserted in the
terminal slot marked red and black connecting
cable is inserted in the black terminal slot, and
that anode and cathode poles are correctly
connected.
Screw hole
Note:It is not suitable for L26A9-AK
Woofer installation
1. Take the woofer out, and place it the hind rind. (See picture)
2. Connect cable to the woofer terminal and
LCD TV terminal.
Woofer
Note:It is not suitable for L26A9-AK
４０
Troubleshooting
Determine and try to solve the problems of your television by yourself before
applying for technical assistance by authorized after-sales service.
Do not leave the television with static picture in an extended period as it may
result in residual image on your television screen.
Troubleshooting
No picture, no sound
Verify if the television is properly plugged.
Verify if the television is properly supplied power.
Verify if electricity is available.
Blank screen
Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.
No sound
Press Mute button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.
Poor sound
Verify if sound system is correct. Refer to some chapter
for adjust.
No picture in some
channel
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and Manual Search.
Verify if the same problem exists in other channels.
No color for some channel Check out of picture and sound systems.
program (black and white) Refer to relative instructions in the Manual for color
adjust.
Spots with some or
all pictures
Television out of control
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Disconnect the television from power supply and, 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.
Note£º
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
４１
Specification
Following are some reference specifications, which may vary from
that of the television that you have just purchased due to technical
innovations.
Model
Power
Power
consumption
LCD screen
~150V-240V£¬50/60Hz
Average£º180W
standby consumption£º<3W
size£º37.02 inch (94.03cm)
viewing angel£º>170¡ã
Condition
NTSC 3.58
NTSC 4.43
PAL 50£¬PAL 60
Average£º140W
standby consumption£º<3W
size£º26 inch (66.03cm)
viewing angel£º>170¡ã
TV
PAL£¬DK£¬I£¬BG
System
L26A9-AK
L37A9-AK/L37A9-AKF
｝
Video
Working temperature 5¡ æ - 35¡æ
Working humidity 20£¥ -80£¥
Store temperature -25¡æ - 45¡æ
Store humidity
5 £¥ - 9 0£ ¥
Connection
terminal
Dimensions
(WXDXH)
Video (RCA)
1.0Vp-p (75ohm)
S-video(Mini D2N4£© Y1.0Vp-p (75ohm) C 0.286Vp-p(75ohm)
Audio L-R(RCAX2£© 0.5Vrms
Y
1.0Vp-p
PbPr
¡À0.35Vp-p
VGA
Analog RGB 0.7Vp-p;75ohm,TTL
DVI
DVI-D
USB
2.0
1151mmX124mmX664mm
User's Manual
Remote control
Accessory Electric cord
Warranty card
External speaker
Woofer
861mmX300mmX526mm
(stand including)
User's Manual
Remote control
Electric cord
Warranty card
Design and specifications contained in the manual might vary due to
technical innovations.
Warranty card is only for the special countries and areas.
４２
Specification(continued)
DVI supporting
Input mode
６４０ｘ４８０　８００ｘ６００　１０２４ｘ７６８　Refurbish frequency（Hz）
６０　６０　，　７５　６０　，　７５　Remark
／　PC supporting
Resolution
６４０ｘ４８０　８００ｘ６００　１０２４ｘ７６８　１６００ｘ１２００　Vertical（Hz） Horizontal（KHz）
６０　３１．５　７５　３７．５　６０　３７．９　７５　４６．９　６０　４８．４　７５　６０．０　６０　７５．０　４３
Clock（MHz）
２５．２　３１．５　４０．０　４９．５　６５．０　７８．７５　１６２．０　０１
００９０５０７７０３